View unanswered posts | View active topics
| Author |
Message |
|
d-boy
|
Post subject:  Posted: Fri Jun 13, 2003 5:14 pm |
|
 |
| Junior Member |
Joined: Mon Jun 02, 2003 7:58 pm
Posts: 26
|
|
Maybe you could also add Verbatim dvd-r 2x to your "to do list". Thought I'd be safe buying them...but "Illegal medum".
I hate Nec.
|
|
| Top |
|
 |
|
Herrie
|
Post subject: Posted: Fri Jun 13, 2003 5:32 pm |
|
|
| Firmware Patcher |
Joined: Fri May 23, 2003 1:47 pm
Posts: 2315
|
d-boy wrote: Maybe you could also add Verbatim dvd-r 2x to your "to do list". Thought I'd be safe buying them...but "Illegal medum".
I hate Nec.
Please post your media code and I'll see what I can do 
|
|
| Top |
|
|
|
d-boy
|
Post subject: Posted: Fri Jun 13, 2003 5:40 pm |
|
|
| Junior Member |
Joined: Mon Jun 02, 2003 7:58 pm
Posts: 26
|
Herrie:
Verbatim dvd-r 2x lead in:
00 42 00 00 01 40 C1 FD 9E D8 52 00 02 87 0E 15 .B...@....R.....
98 9A 90 00 03 43 4D 43 20 4D 41 00 04 47 2E 41 .....CMC MA..G.A
46 30 31 00 05 CC C0 00 00 00 01 00 06 0B 10 11 F01.............
87 78 80 00 07 88 80 00 00 00 00 00 08 06 17 0D .X..............
These are the 4 first lines (there are many more lines), but I guess since everybody elses posting 3 or 4 lines, this should be it.
Right? 
Last edited by d-boy on Fri Jun 13, 2003 5:51 pm, edited 1 time in total.
|
|
| Top |
|
|
|
peca
|
Post subject: ..and what about Multidisc -R Posted: Fri Jun 13, 2003 5:48 pm |
|
|
| New Member |
Joined: Fri Jun 13, 2003 5:31 pm
Posts: 3
|
|
I have 50 MULTIDISC DVD-R version 2.0
00 42 00 00 01 40 C1 FD 9E D8 50 00 02 87 0D 13 .B...@....P.....
88 99 80 00 03 55 54 4A 47 30 31 00 04 30 30 31 .....UTJG01..001
00 00 00 00 05 00 00 00 00 00 01 00 00 00 00 00 ................
What do you think? Is it possible? Thank you. Peca
|
|
| Top |
|
|
|
Herrie
|
Post subject: Re: ..and what about Multidisc -R Posted: Fri Jun 13, 2003 7:09 pm |
|
|
| Firmware Patcher |
Joined: Fri May 23, 2003 1:47 pm
Posts: 2315
|
peca wrote: I have 50 MULTIDISC DVD-R version 2.0
00 42 00 00 01 40 C1 FD 9E D8 50 00 02 87 0D 13 .B...@....P.....
88 99 80 00 03 55 54 4A 47 30 31 00 04 30 30 31 .....UTJG01..001
00 00 00 00 05 00 00 00 00 00 01 00 00 00 00 00 ................
What do you think? Is it possible? Thank you. Peca
Sorry no writing method for this one in the current firmware  I could replace some other writing method, but the chance that it will work is very very very small
|
|
| Top |
|
|
|
Herrie
|
Post subject: Posted: Fri Jun 13, 2003 7:19 pm |
|
|
| Firmware Patcher |
Joined: Fri May 23, 2003 1:47 pm
Posts: 2315
|
I made a second version containing some optimizations.
I also removed a DVD Video-rip lock. (Big thanks to a friend that doesn't want to have his name here  for the tip). I didn't check this myself yet, so please post your experiences!
I'd also like to thank Etna for his support and checksum tool.
For the people I've sent a special adjusted f/w by mail:
This firmware was specially adjusted for your situation. When you will put this firmware it might not work with your 'specific' media!
For the people that would like to try:
[edit]
Link removed, newer version should fix problems
[/edit]
Please post your experiences!
Last edited by Herrie on Sun Jun 15, 2003 7:25 pm, edited 3 times in total.
|
|
| Top |
|
|
|
peca
|
Post subject: Re: ..and what about Multidisc -R Posted: Fri Jun 13, 2003 7:47 pm |
|
|
| New Member |
Joined: Fri Jun 13, 2003 5:31 pm
Posts: 3
|
Herrie wrote: peca wrote: I have 50 MULTIDISC DVD-R version 2.0
00 42 00 00 01 40 C1 FD 9E D8 50 00 02 87 0D 13 .B...@....P.....
88 99 80 00 03 55 54 4A 47 30 31 00 04 30 30 31 .....UTJG01..001
00 00 00 00 05 00 00 00 00 00 01 00 00 00 00 00 ................
What do you think? Is it possible? Thank you. Peca Sorry no writing method for this one in the current firmware I could replace some other writing method, but the chance that it will work is very very very small Thank you for your interest. Good job. Peca
|
|
| Top |
|
|
|
Humid
|
Post subject: Posted: Fri Jun 13, 2003 8:34 pm |
|
|
| Professional Poster |
Joined: Tue Jun 03, 2003 11:25 pm
Posts: 93
|
Ok, here goes nothing.
So this is the ADVDInfo 0D - Recording Management Area Data of the Big Pocket's own white 4x Speed DVD-R.
00 42 00 00 01 40 C1 FD 9E D8 52 00 02 86 0D 13 .B...@....R.....
66 78 80 00 03 4C 4F 4E 47 54 45 00 04 4E 20 54 FX...LONGTE..N T
45 43 48 00 05 88 80 00 00 00 01 00 06 08 0F 11 ECH.............
87 78 80 00 07 88 80 00 00 00 00 00 08 05 16 0D .X..............
0F 0B 0B 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
I didn't know which "option" should I choose from ADVD, that seemed the one, because of the text-part (LONGTE..) 
So Herrie, is there anything you could do for these medias?
|
|
| Top |
|
|
|
zenon
|
Post subject: Posted: Fri Jun 13, 2003 8:42 pm |
|
|
| New Member |
Joined: Fri Jun 13, 2003 8:32 pm
Posts: 1
|
|
Hi,
i have about 50 DVD-R from Universal 2x Speed, until now i couldn´t burn them, also not with the new hack firmware,
here is the header :
00 42 00 00 01 40 C1 FD 9E D8 50 00 02 8A 0D 14 .B...@....P.....
88 88 80 00 03 50 52 4F 44 49 53 00 04 43 47 30 .....PRODIS..CG0
31 00 00 00 05 CC C0 00 00 00 00 00 00 00 00 00 1...............
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
hopefully you guys can help me out.......
|
|
| Top |
|
|
|
rapsac
|
Post subject: Posted: Fri Jun 13, 2003 8:54 pm |
|
|
| Fresh meat |
Joined: Fri Jun 13, 2003 2:52 am
Posts: 16
|
|
Thanks for the tip on the checksum.
Here is the header of the non-working(so far) princo 4xdvd-r i have:
00 42 00 00 01 40 C1 FD 9E D8 52 00 02 87 0E 13 .B...@....R.....
87 88 80 00 03 50 52 49 4E 43 4F 00 04 00 00 00 .....PRINCO.....
00 00 00 00 05 88 80 00 00 00 01 00 06 0B 0F 11 ................
86 67 80 00 07 88 80 00 00 00 00 00 08 01 1B 0B .g..............
I am going to try the new hacked version now, i'll let you know if it works at 2x
|
|
| Top |
|
|
|
rapsac
|
Post subject: Posted: Fri Jun 13, 2003 8:58 pm |
|
|
| Fresh meat |
Joined: Fri Jun 13, 2003 2:52 am
Posts: 16
|
Hehe, now its back to 'íllegal medium'
A quick test of the ripping hack: i dont see a x2 max ripping for dvd-video anymore, so it seems to work
-edit- The ripping hack works. Speed is x3 at the beginning of the disc and rises upto x8 at the end
Last edited by rapsac on Fri Jun 13, 2003 9:12 pm, edited 1 time in total.
|
|
| Top |
|
|
|
paulpsomiadis
|
Post subject: Bulkpaq Orange Top Posted: Fri Jun 13, 2003 9:03 pm |
|
|
| New Member |
Joined: Fri Jun 13, 2003 8:55 pm
Posts: 3
Location: U.K.
|
|
I have 25 of the following media, but I 'STILL' get the incorrect media error whilst trying to burn...
BulkPaq Orange Top 4x DVD-R gen 4
00 42 00 00 01 40 C1 FD 9E D8 52 00 02 F7 0E 0B .B...@....R.....
77 88 70 00 03 50 52 49 4E 43 4F 00 04 00 00 00 W.P..PRINCO.....
00 00 00 00 05 AA A2 22 22 20 01 00 06 0B 0F 12 ......."" ......
66 66 80 00 07 88 80 00 00 00 00 00 08 01 1B 0B FF..............
0F 08 08 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
Could you PLEASE add this media to the firmware so I can use it in my drive.
I will PM you Herrie if you'd prefer me to...?
_________________
-=3DFX still rox!=-
|
|
| Top |
|
|
|
Ghlargh
|
Post subject: Posted: Fri Jun 13, 2003 10:12 pm |
|
|
| Rookie |
Joined: Fri Jun 13, 2003 10:04 pm
Posts: 8
Location: Sweden
|
rapsac wrote: I tried the hacked firmware with a red-top Princo(datawrite 4x). It does recognize it now and allows me to burn it at 2x but the result is a coaster!
It only verifies upto 40%, all the rest is junk. When looking at the dvd you can see a light area in the center and a dark area on the outside. I guess the write strategy is no good for it.
Could this be the reason for Princo being banned in the firmware? NEC still not having a working write strategy and for that reason making it completely impossible to burn them until they manage to make the write strategy work fully?
After all, it is a lot better having some people being [*oops*] that some medias won't work, than having the same people being homicidaly furious that half of their 400 gig backup won't work...
|
|
| Top |
|
|
|
jedimaster2001
|
Post subject: Posted: Fri Jun 13, 2003 10:39 pm |
|
|
| New Member |
Joined: Fri Jun 13, 2003 10:28 pm
Posts: 1
|
|
I saw your post for the hacked firmware, and just happen to have 100 4x red princo disk i use as paper weights at the mo.
Well i followed your instructions and booted of a floopy into dos and run the nec1300a exe with the switches. In my case
nec1300a -pri -mas -out oldrom.bin -flash 1300-105h.bin
my hard drives are on the raid ports, and it say unable to flash drive only for use with nec 1100, Iam probally doing something stupid,
But can u suggest something, cause id really like to use those disks,
Ive got a feeling it might have something to do with the raid,but not sure
thanks in advance
|
|
| Top |
|
|
|
Herrie
|
Post subject: Re: Bulkpaq Orange Top Posted: Fri Jun 13, 2003 10:41 pm |
|
|
| Firmware Patcher |
Joined: Fri May 23, 2003 1:47 pm
Posts: 2315
|
paulpsomiadis wrote: I have 25 of the following media, but I 'STILL' get the incorrect media error whilst trying to burn...
BulkPaq Orange Top 4x DVD-R gen 4
00 42 00 00 01 40 C1 FD 9E D8 52 00 02 F7 0E 0B .B...@....R.....
77 88 70 00 03 50 52 49 4E 43 4F 00 04 00 00 00 W.P..PRINCO.....
00 00 00 00 05 AA A2 22 22 20 01 00 06 0B 0F 12 ......."" ......
66 66 80 00 07 88 80 00 00 00 00 00 08 01 1B 0B FF..............
0F 08 08 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
Could you PLEASE add this media to the firmware so I can use it in my drive.
I will PM you Herrie if you'd prefer me to...?
I made a mistake in my new hack :'( Trying to fix it now on my other PC. 4x media which could be written @ 2x with the old hack doesn't seem to work anymore now :'( Going to investigate further
|
|
| Top |
|
|
|
jgotts
|
Post subject: No luck with purple media Posted: Fri Jun 13, 2003 10:44 pm |
|
|
| New Member |
Joined: Fri Jun 13, 2003 10:29 am
Posts: 3
|
|
Thanks for your work, Herrie.
I'm still having no luck with my purple media.
|
|
| Top |
|
|
|
BAR-Tec
|
Post subject: Posted: Fri Jun 13, 2003 10:52 pm |
|
|
| New Member |
Joined: Fri Jun 13, 2003 10:45 pm
Posts: 4
Location: POLAND
|
I buyed my NEC 1300 today
I need support for this DVD-R 2x
MEDIASONIC :
00 42 00 00 01 40 C1 FD 9E D8 50 00 02 87 0D 13 .B...@....P.....
88 99 80 00 03 47 53 43 30 30 31 00 04 00 00 00 .....GSC001.....
|
|
| Top |
|
|
|
Herrie
|
Post subject: Posted: Fri Jun 13, 2003 11:09 pm |
|
|
| Firmware Patcher |
Joined: Fri May 23, 2003 1:47 pm
Posts: 2315
|
BAR-Tec wrote: I buyed my NEC 1300 today I need support for this DVD-R 2x MEDIASONIC : 00 42 00 00 01 40 C1 FD 9E D8 50 00 02 87 0D 13 .B...@....P..... 88 99 80 00 03 47 53 43 30 30 31 00 04 00 00 00 .....GSC001..... Could you please post the 3rd line of the Media Code too, so I can do some checks?
|
|
| Top |
|
|
|
paulpsomiadis
|
Post subject: Bulkpaq Working! Posted: Fri Jun 13, 2003 11:12 pm |
|
|
| New Member |
Joined: Fri Jun 13, 2003 8:55 pm
Posts: 3
Location: U.K.
|
|
Yup, you're right Herrie!
I re-flashed with your FIRST hacked firmware and my 'Bulkpaq Orange Top DVD-R gen 4' will now burn at 2x.
I'll test the burned disk to see if data is O.K. and post again later...
Good luck with the V3 firmware fix!
RESPECT!!!
_________________
-=3DFX still rox!=-
|
|
| Top |
|
|
|
Herrie
|
Post subject: Posted: Fri Jun 13, 2003 11:19 pm |
|
|
| Firmware Patcher |
Joined: Fri May 23, 2003 1:47 pm
Posts: 2315
|
|
Going to get some sleep now, because I didn't get much sleep in the past few nights. Will continue tomorrow morning!
|
|
| Top |
|
|
|
BAR-Tec
|
Post subject: Posted: Fri Jun 13, 2003 11:50 pm |
|
|
| New Member |
Joined: Fri Jun 13, 2003 10:45 pm
Posts: 4
Location: POLAND
|
I don't know why but for me function in DVDInfo copy to clipboard
copy only first 2 lines, third not
I buyed my NEC 1300 today
I need support for this DVD-R 2x
MEDIASONIC :
00 42 00 00 01 40 C1 FD 9E D8 50 00 02 87 0D 13 .B...@....P.....
88 99 80 00 03 47 53 43 30 30 31 00 04 00 00 00 .....GSC001.....
00 00 00 00 05 00 00 00 00 00 01 00 00 00 00 00 ................
|
|
| Top |
|
|
|
YoAnn
|
Post subject: Posted: Sat Jun 14, 2003 1:17 am |
|
|
| Rookie |
Joined: Thu Jun 05, 2003 5:10 am
Posts: 9
|
BAR-Tec wrote: I don't know why but for me function in DVDInfo copy to clipboard copy only first 2 lines, third not I buyed my NEC 1300 today I need support for this DVD-R 2x MEDIASONIC : 00 42 00 00 01 40 C1 FD 9E D8 50 00 02 87 0D 13 .B...@....P..... 88 99 80 00 03 47 53 43 30 30 31 00 04 00 00 00 .....GSC001..... 00 00 00 00 05 00 00 00 00 00 01 00 00 00 00 00 ................ Test this Firmware :
http://yo771.free.fr/nec-1300a/1_05_with_GSC.rar
|
|
| Top |
|
|
|
battletank
|
Post subject: Posted: Sat Jun 14, 2003 7:14 am |
|
|
| Junior Member |
Joined: Mon Dec 23, 2002 8:46 am
Posts: 21
|
|
In amongst all the requests for work which Herrie is receiving, I'd just like to thank him for all the time and effort he's put into this, without payment, and without much in the way of thanks! So... Thank you, Herrie!
|
|
| Top |
|
|
|
Géo
|
Post subject: Posted: Sat Jun 14, 2003 9:16 am |
|
|
| New Member |
Joined: Sat Jun 14, 2003 8:31 am
Posts: 2
|
Hello,
I have the same problem with primeon DVD-R
004200000140C1FD9ED85000027A0C15 .B...@....P..Z..
77789000034444442044560004445200 wx...DDD DV..DR.
0000000005CCC0000000010000000000 ................
|
|
| Top |
|
|
|
[_chef_]
|
Post subject: Posted: Sat Jun 14, 2003 9:30 am |
|
Joined: Fri Aug 09, 2002 11:39 am
Posts: 22062
Location: .de #...still playing LLAMATRON!# *Benders.Big.Score*
|
Géo wrote: Hello, I have the same problem with primeon DVD-R 004200000140C1FD9ED85000027A0C15 .B...@....P..Z.. 77789000034444442044560004445200 wx...DDD DV..DR. 0000000005CCC0000000010000000000 ................ This is the most common non-supported media for the nec 1300 beside the media with Princo-IDs.
_________________
.:The rpc1.org FAQ:. Please read & follow our firmware request rules precisely! The DiscInfo tool
|
|
| Top |
|
|
Who is online |
Registered users: Baidu [Spider], Google [Bot], MSN [Bot] |
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
|
|
