I hope I'm doing this right. If not I apologize.
DISCINFO VERSION : 1.7.0 BETA.12
VENDOR : PIONEER
MODEL : BD-RW BDR-XD04
REVISION : 1.20
LOADING MECHANISM : Tray
SERIAL NUMBER :
NUMBER VOL. LEVELS : 256
BUFFER SIZE : 4000KB
INTERFACE : ATAPI
RPC2 SCHEME : YES
STATUS : Not Set
USER CHANGES : 5
VENDOR CHANGES : 4
CURRENT REGION : Not Set
ANALOG AUDIO PLAY : YES
COMPOSITE OUTPUT : NO
DIGITAL PORT-PORT1 : NO
DIGITAL PORT-PORT2 : NO
READ UPC CODE : YES
MULTISESSION READ : YES
MODE 2 FORM 1 : YES
MODE 2 FORM 2 : YES
READ ISRC CODE : YES
READ BAD CODE : NO
BUFFER UNDER-RUN : YES
MT. RAINIER : NO
CAN READ CDR : YES
CAN READ CDRW : YES
CAN READ CDRM2 : YES
CAN WRITE CDR : YES
CAN WRITE CDRW : YES
CAN TEST WRITE : YES
CAN READ DVD-ROM : YES
CAN READ DVD-R : YES
CAN READ DVD-RW : YES
CAN READ DVD-RAM : YES
CAN READ DVD+R : YES
CAN READ DVD+RW : YES
CAN WRITE DVD-R : YES
CAN WRITE DVD-RW : YES
CAN WRITE DVD-RAM : YES
CAN WRITE DVD+R : YES
CAN WRITE DVD+RW : YES
MAX CDR READ SPEED : 8
MAX CDR WRITE SPEED: 8
Original firmware link:
http://pioneer.jp/cgi-bin/device/downlo ... W120EU.EXE
