|
Portal Board index » .:: Firmware Flashing ::. » Request firmware
All times are UTC [ DST ]
|
| Author |
Message |
|
|
 Posted: Thu Dec 31, 2009 12:39 pm |
|
Joined: Fri May 07, 2004 11:51 am
Posts: 14
|
Hi, I was wondering if someone has created either an RPC1 or RPC2 auto-reset firmware for this drive. It is a laptop drive used in the Acer Aspire 5739G (and presumable other Acer laptops). I'd like to provide a link to the official firmware, but I'm not really sure where to find it. I will of course dump the firmware from my own drive if someone points me towards the application to do this. Thanks. Quote: DISCINFO VERSION : 1.7.0 BETA.12
VENDOR : HL-DT-ST
MODEL : DVDRAM GT30N
REVISION : 1.01
VENDOR SPECIFIC : 09/07/08 7U01
LOADING MECHANISM : Tray
SERIAL NUMBER :
NUMBER VOL. LEVELS : 255
BUFFER SIZE : 1024KB
INTERFACE : ATAPI
RPC2 SCHEME : YES
STATUS : Not Set
USER CHANGES : 5
VENDOR CHANGES : 4
CURRENT REGION : Not Set
ANALOG AUDIO PLAY : YES
COMPOSITE OUTPUT : NO
DIGITAL PORT-PORT1 : NO
DIGITAL PORT-PORT2 : NO
READ UPC CODE : YES
MULTISESSION READ : YES
MODE 2 FORM 1 : YES
MODE 2 FORM 2 : YES
READ ISRC CODE : YES
READ BAD CODE : NO
BUFFER UNDER-RUN : YES
MT. RAINIER : NO
CAN READ CDR : YES
CAN READ CDRW : YES
CAN READ CDRM2 : YES
CAN WRITE CDR : YES
CAN WRITE CDRW : YES
CAN TEST WRITE : YES
CAN READ DVD-ROM : YES
CAN READ DVD-R : YES
CAN READ DVD-RW : YES
CAN READ DVD-RAM : YES
CAN READ DVD+R : YES
CAN READ DVD+RW : YES
CAN WRITE DVD-R : YES
CAN WRITE DVD-RW : YES
CAN WRITE DVD-RAM : YES
CAN WRITE DVD+R : YES
CAN WRITE DVD+RW : YES
MAX CDR READ SPEED : 24
MAX CDR WRITE SPEED: 24
|
|
| Top |
|
 |
|
|
Posted: Thu Dec 31, 2009 8:10 pm |
|
| dirtbiker |
| Professional Poster |
Joined: Thu Sep 16, 2004 3:12 pm
Posts: 56
Location: BT.DE
|
|
I have the same dive build in an ASUS M60J Notebook.
The FW Revisision here is AS02.
I think this are OEM FW's. Will retail FW's work if there is one?
On the LG Webpage is no info about this drive.
_________________
tha' dirtbiker was here 
|
|
| Top |
|
|
|
|
Posted: Fri Jan 01, 2010 2:43 pm |
|
| chef |
| Administrator |
 |
 |
Joined: Fri Aug 09, 2002 11:39 am
Posts: 23433
Location: .de #...still playing LLAMATRON! # sprite killing around level 138 and higher....
|
dirtbiker wrote: I have the same dive build in an ASUS M60J Notebook.
The FW Revisision here is AS02.
I think this are OEM FW's. Will retail FW's work if there is one?
On the LG Webpage is no info about this drive. Slimtype drives have OEM firmwares, no "retail".
_________________
.:The rpc1.org FAQ:. Please read & follow our firmware request rules precisely! .:The DiscInfo tool:.
I am looking for DVD-R for Authoring DVD-R (A) & HD-DVD media, any size, any brand. Please pm me if you can help. 
|
|
| Top |
|
|
|
|
Posted: Sat Jan 02, 2010 8:15 am |
|
| devilsclaw |
| Moderator |
 |
 |
Joined: Sat Jan 12, 2002 6:08 am
Posts: 331
|
I could not find any info on this drives chipset so I dont know if my utility will allows you to backup your firmware or not. but you cant at least try it.. it wont her to try. viewtopic.php?f=2&t=45978
|
|
| Top |
|
|
|
|
Posted: Fri Jan 29, 2010 4:02 pm |
|
Joined: Fri May 07, 2004 11:51 am
Posts: 14
|
|
Sorry for the slow reply, I have been preoccupied with exams.
I was not able to extract the firmware with the above programs I'm afraid, though I will have another attempt tonight.
|
|
| Top |
|
|
|
|
Posted: Wed Feb 03, 2010 1:08 am |
|
| ala42 |
| Firmware Patcher |
 |
Joined: Sun Nov 02, 2003 4:18 am
Posts: 990
Location: Germany
|
|
The GT30N uses a Panasonic chipset and firmware type, so the dumper will not work here.
Edit: I have already updated the MCSE RPC1 patch to match the GT30N firmware, but have to valid it first.
_________________
LiteOn/Benq/LG/NEC/Pioneer/Samsung/Toshiba stuff: MediaCodeSpeedEdit V 1.2.0.10, released October 3rd 2011
|
|
| Top |
|
|
|
|
Posted: Mon Apr 12, 2010 2:08 am |
|
Joined: Fri May 07, 2004 11:51 am
Posts: 14
|
|
^I noticed you've just released a new version, that supports the GT20N. Does it also support the GT30N?
|
|
| Top |
|
|
|
|
Posted: Mon Apr 12, 2010 2:29 am |
|
| ala42 |
| Firmware Patcher |
|
Joined: Sun Nov 02, 2003 4:18 am
Posts: 990
Location: Germany
|
Shakey_Jake33 wrote: ^I noticed you've just released a new version, that supports the GT20N. Does it also support the GT30N? It does, but it is not tested on a drive yet.
_________________
LiteOn/Benq/LG/NEC/Pioneer/Samsung/Toshiba stuff: MediaCodeSpeedEdit V 1.2.0.10, released October 3rd 2011
|
|
| Top |
|
|
|
|
Posted: Wed Apr 14, 2010 4:30 am |
|
Joined: Fri May 07, 2004 11:51 am
Posts: 14
|
|
Does anyone know where to obtain a firmware for this drive (or how to extract one from my own drive)? I will obviously report here if the patch appears to work.
|
|
| Top |
|
|
|
|
Posted: Thu Apr 15, 2010 11:02 pm |
|
| ala42 |
| Firmware Patcher |
|
Joined: Sun Nov 02, 2003 4:18 am
Posts: 990
Location: Germany
|
|
| Top |
|
|
|
|
Posted: Fri Apr 16, 2010 5:03 pm |
|
| dirtbiker |
| Professional Poster |
Joined: Thu Sep 16, 2004 3:12 pm
Posts: 56
Location: BT.DE
|
|
I patched my Asus-LG GT30N from AS02 to ASS2.
I use MCSE 1206 newest version and enabled RPC1 and Read speed incrase for the bin-file.
At the exe-file I enabled standalone flasher.
Than I got the files: R5_ASS2_speedpatched.exe + R5_ASS2_speedpatched.bin
Next I start the exe file choose the bin file an booted the notebook.
After that DISC info shows:
DriveRegionStatus Lock Detected
RegionSettingStatus Set
Changes left 4
Manufactor resets 4
Current Region 2
Is this normal that a lock is detected?
_________________
tha' dirtbiker was here
|
|
| Top |
|
|
|
|
Posted: Fri Apr 16, 2010 5:31 pm |
|
| Puma |
| Administrator |
|
Joined: Tue May 11, 2004 3:02 pm
Posts: 10124
Location: UK
|
dirtbiker wrote: I patched my Asus-LG GT30N from AS02 to ASS2.
I use MCSE 1206 newest version and enabled RPC1 and Read speed incrase for the bin-file.
At the exe-file I enabled standalone flasher.
Than I got the files: R5_ASS2_speedpatched.exe + R5_ASS2_speedpatched.bin
Next I start the exe file choose the bin file an booted the notebook.
After that DISC info shows:
DriveRegionStatus Lock Detected
RegionSettingStatus Set
Changes left 4
Manufactor resets 4
Current Region 2
Is this normal that a lock is detected? As ala42 posted it hadn't been tested on a drive until you have done it, if you have no region blocking software running, then the patch does not work, sure ala can advise you better
_________________
Read The FAQ Firmware Request Rules
MCSE Thread Utilities
|
|
| Top |
|
|
|
|
Posted: Fri Apr 16, 2010 6:25 pm |
|
| chef |
| Administrator |
|
|
Joined: Fri Aug 09, 2002 11:39 am
Posts: 23433
Location: .de #...still playing LLAMATRON! # sprite killing around level 138 and higher....
|
dirtbiker wrote: I patched my Asus-LG GT30N from AS02 to ASS2.
That doesnt sound like an suitable update for this drive...
_________________
.:The rpc1.org FAQ:. Please read & follow our firmware request rules precisely! .:The DiscInfo tool:.
I am looking for DVD-R for Authoring DVD-R (A) & HD-DVD media, any size, any brand. Please pm me if you can help.
|
|
| Top |
|
|
|
|
Posted: Fri Apr 16, 2010 6:31 pm |
|
| Puma |
| Administrator |
|
Joined: Tue May 11, 2004 3:02 pm
Posts: 10124
Location: UK
|
[_chef_] wrote: dirtbiker wrote: I patched my Asus-LG GT30N from AS02 to ASS2.
That doesnt sound like an suitable update for this drive... yeah its ok, he has an Asus notebook, and ASS2 is an official asus firmware update
_________________
Read The FAQFirmware Request Rules
MCSE Thread Utilities
|
|
| Top |
|
|
|
|
Posted: Sat Apr 17, 2010 12:33 am |
|
| ala42 |
| Firmware Patcher |
|
Joined: Sun Nov 02, 2003 4:18 am
Posts: 990
Location: Germany
|
dirtbiker wrote: I patched my Asus-LG GT30N from AS02 to ASS2.
Is this normal that a lock is detected? No, the lock is not normal for an RPC1 firmware. Did you directly flash from AS02 to the RPC1 patched ASS2 without flashing the official ASS2 before ? Do you see ASS2 as the current firmware revision ?
_________________
LiteOn/Benq/LG/NEC/Pioneer/Samsung/Toshiba stuff: MediaCodeSpeedEdit V 1.2.0.10, released October 3rd 2011
|
|
| Top |
|
|
|
|
Posted: Sat Apr 17, 2010 6:09 am |
|
| dirtbiker |
| Professional Poster |
Joined: Thu Sep 16, 2004 3:12 pm
Posts: 56
Location: BT.DE
|
|
No at firtst I flashed only the bin file and not the exe file to standaloneflascher.
Than i could not choose a bin file and saw with 7z that the exe file includes the fw too so i think i flshed first the offical fw.
Second i flssh the ext to standalone flascher and could choose my speedpatched bin file.
Yes I can see ASS2 as current FW - see DiscInfo output:
DISCINFO VERSION : 1.7.0 BETA.12
VENDOR : HL-DT-ST
MODEL : DVDRAM GT30N
REVISION : ASS2
VENDOR SPECIFIC : 09/07/08 7U01
LOADING MECHANISM : Tray
SERIAL NUMBER : ---
NUMBER VOL. LEVELS : 255
BUFFER SIZE : 1024KB
INTERFACE : ATAPI
RPC2 SCHEME : YES
STATUS : Set
USER CHANGES : 4
VENDOR CHANGES : 4
CURRENT REGION : 2
But it shows at DriveRegionStatus: Lock Detected as with original ASS2 FW.
I can pay RC 2 DVD's without problems. Other Regions I havent't to test at the moment.
_________________
tha' dirtbiker was here
|
|
| Top |
|
|
|
|
Posted: Sat Apr 17, 2010 2:21 pm |
|
| ala42 |
| Firmware Patcher |
|
Joined: Sun Nov 02, 2003 4:18 am
Posts: 990
Location: Germany
|
|
| Top |
|
|
|
|
Posted: Sat Apr 17, 2010 3:13 pm |
|
Joined: Fri May 07, 2004 11:51 am
Posts: 14
|
ala42 wrote: I actually have an Acer laptop, and Acer seem to use a different numbering scheme (perhaps even different firmware). The firmware for my drive is apparently '1.01', which differs greately from 'ASS2'. I have no idea if they are actually different firmwares, though Asus's patcher correctly identifies my existing firmware as 1.01. I can't seem to find an Acer-specific firmware on their page, though I will of course do some digging on the net.
|
|
| Top |
|
|
|
|
Posted: Sun Apr 18, 2010 4:29 pm |
|
| dirtbiker |
| Professional Poster |
Joined: Thu Sep 16, 2004 3:12 pm
Posts: 56
Location: BT.DE
|
|
Hello ala42,
I made what you wrote to me - thanks:
-flash back to 02 with speedptched.exe
-reboot
-flsch again with speedpatched.exe and speedpatched.bin S2
-reboot
But DiscInfo shows again lock detected - region set to 2, 4 changes left?
_________________
tha' dirtbiker was here
|
|
| Top |
|
|
|
|
Posted: Sun Apr 18, 2010 6:10 pm |
|
| ala42 |
| Firmware Patcher |
|
Joined: Sun Nov 02, 2003 4:18 am
Posts: 990
Location: Germany
|
|
| Top |
|
|
|
|
Posted: Sun Apr 18, 2010 7:04 pm |
|
| dirtbiker |
| Professional Poster |
Joined: Thu Sep 16, 2004 3:12 pm
Posts: 56
Location: BT.DE
|
|
Yes I saw AS02 after the first flash.
_________________
tha' dirtbiker was here
|
|
| Top |
|
|
|
|
Posted: Sun Apr 25, 2010 5:35 pm |
|
| ala42 |
| Firmware Patcher |
|
Joined: Sun Nov 02, 2003 4:18 am
Posts: 990
Location: Germany
|
|
| Top |
|
|
|
|
Posted: Sun Apr 25, 2010 6:11 pm |
|
| dirtbiker |
| Professional Poster |
Joined: Thu Sep 16, 2004 3:12 pm
Posts: 56
Location: BT.DE
|
|
NO LOCK IS DETECTED
Yes now it is working correctly - thanks ala42
_________________
tha' dirtbiker was here
|
|
| Top |
|
|
|
