|
Portal Board index » .:: Firmware Flashing ::. » Firmware flashing help
All times are UTC [ DST ]
|
 
|
Page 1 of 1
|
[ 5 posts ] |
|
| Author |
Message |
|
|
 Posted: Wed Oct 28, 2009 6:43 pm |
|
Joined: Tue Oct 27, 2009 4:41 pm
Posts: 8
Location: YUMA, ARIZONA, USA
|
|
I have a Samsung SH-S202 Rev.G DVD burner. It has SB00 on it from the factory. Can this drive be upgraded to SB01, SB02, OR SB03? Would that also change the rev. or is there a Hardware difference between rev. j, h, n, etc.
_________________
Some things must be believed, to be seen.
|
|
| Top |
|
 |
|
|
Posted: Wed Oct 28, 2009 8:04 pm |
|
Joined: Tue Oct 27, 2009 4:41 pm
Posts: 8
Location: YUMA, ARIZONA, USA
|
|
I was referring to the label on the drive that says "rev. G", I only assumed that meant it was SH-S202G
At any rate, do you know if I can flash this drive with a newer rev. as indicated?
_________________
Some things must be believed, to be seen.
|
|
| Top |
|
|
|
|
Posted: Wed Oct 28, 2009 8:45 pm |
|
Joined: Tue Oct 27, 2009 4:41 pm
Posts: 8
Location: YUMA, ARIZONA, USA
|
Thanks for trying to help.  I don't currently use that drive and since I have 2 of them, I may try it with SB01 to see if it works. Unless someone else knows.
_________________
Some things must be believed, to be seen.
|
|
| Top |
|
|
|
|
Page 1 of 1
|
[ 5 posts ] |
|
|
