The Firmware Page

Hi all.
I have tried to burn an iso file using imgburn. The problem is, that after the process has successfully finished, I cannot use it in my wii consol. The first message I got is that the disc is not empty, but after ejecting it and trying to watch it, it says that the disc is empty and ready for use. I have disabled the test mode and both verifying modes (on/off),
It only happened once, that a burning disc has been created successfully. I don't remember what I changed, but it’s the only game that works. I have tried to put it in my computer to watch the log and trying to figured out any differences between success and error Hope someone can figure out the problem. By the way, I'm using Verbatim discs and SB00 firmware.

Log file succes:
TSSTcorp CDDVDW SN-S082H SB00 (ATA)
Current Profile: DVD+R

Disc Information:
Status: Complete
Erasable: No
Sessions: 1
Sectors: 2.294.912
Size: 4.699.979.776 bytes
Time: 510:00:62 (MM:SS:FF)
Supported Write Speeds: 3x; 4x; 6x; 8x

TOC Information:
Session 1...
-> Track 01 (Mode 1, LBA: 0 - 2294911)
-> LeadOut (LBA: 2294912)

Physical Format Information (ADIP):
Disc ID: MCC-004-00
Book Type: DVD+R
Part Version: 1
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 1
Track Path: Parallel Track Path (PTP)
Linear Density: 0.267 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196.608
Last Physical Sector of Data Area: 2.491.711
Last Physical Sector in Layer 0: 0

Physical Format Information (Last Recorded):
Disc ID: MCC-004-00
Book Type: DVD-ROM
Part Version: 1
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 1
Track Path: Parallel Track Path (PTP)
Linear Density: 0.267 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196.608
Last Physical Sector of Data Area: 2.491.519
Last Physical Sector in Layer 0: 0


Log file fail:
TSSTcorp CDDVDW SN-S082H SB00 (ATA)
Current Profile: DVD+R

Disc Information:
Status: Empty
Erasable: No
Free Sectors: 2.295.104
Free Space: 4.700.372.992 bytes
Free Time: 510:03:29 (MM:SS:FF)
Supported Write Speeds: 3x; 4x; 6x; 8x

Physical Format Information (ADIP):
Disc ID: MCC-004-00
Book Type: DVD+R
Part Version: 1
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 1
Track Path: Parallel Track Path (PTP)
Linear Density: 0.267 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196.608
Last Physical Sector of Data Area: 2.491.711
Last Physical Sector in Layer 0: 0

Physical Format Information (Last Recorded):
Disc ID: MCC-004-00
Book Type: DVD+R
Part Version: 1
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 1
Track Path: Parallel Track Path (PTP)
Linear Density: 0.267 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196.608
Last Physical Sector of Data Area: 2.491.711
Last Physical Sector in Layer 0: 0

I don´t know if this will help, but there is an updated firmare available...

Thanks for the answar bf, but nothing has changed. It looks like some media has been burned to the disk (about 1 cm on the disc from the center). I wonder if the settings has something to do with it. In "I/0" "SPTI - Microsoft" and "Write type -> TAO are switched on. In "events" "set build mode -> most recently used is switched on, not the "image file". I'm using the default settings and I have tried with both versions 2.4.1.0 amd 2.4.2.0. I'm wasting discs everyt time, so im hoping someone has an idea of whats wrong.

RPC1 does not give help for copying games

Ok. I'm trying to backup games, but nothing works. Anyway, thx for your help.