MCSE Thread (Version 1.2.0.10 - 2011.10.03)

ala42 · **Posted:** Mon Mar 31, 2008 12:47 am

MediaCodeSpeedEdit V1.1.0.15 is out

Code:

Changelog
1.1.0.15 31 Mar 2008
        - added support for HL-DT-ST DVDRAM GH20NS10 EL01/GH20LS10 FL01
        - added support for HL-DT-ST DVD-RAM GSA-H58N 1.03
        - added auto unpack option for LG H5x flasher package
        - added HL-DT-STDVD-RAM GSA-E60@H55 crossflash option
          Warning: Flashing the drive in its USB enclosure can cause
          major problems. It is alot safer to take the drive out of the 
          enclosure and flash it while it is connected to a IDE cable.
        - fixed MKM 03RD30 write speed display for several LG drives

        - added support for LiteOn ATAPI DVD A DH16A4/DH18A4
        - added support for Optiarc DVD RW AD-7201A/S 1.05
        - verified support for Optiarc DVD RW AD-719x/720xA/S 1.05

Download Changelog

drhhitman · **Joined:** Sun Apr 13, 2008 1:47 am **Posts:** 2

Hey guys just wondering if anyone could confirm whether the latest version of MCSE works with the 9P56 firmware version as i have tried to get it working.... but no luck.

Thanks

Puma · **Posted:** Sun Apr 13, 2008 10:51 am

drhhitman wrote:

Hey guys just wondering if anyone could confirm whether the latest version of MCSE works with the 9P56 firmware version as i have tried to get it working.... but no luck.

Thanks

it works as it should, MCSE doesn't support patches for RPC1,Bitsetting or read speed for this, what are you wanting to do?

ala42 · **Posted:** Sun May 18, 2008 10:13 am

MediaCodeSpeedEdit V1.1.0.16 is out

Code:

Changelog
1.1.0.16 02 May 2008
        - added support for TSSTcorpCDDVDW SH-S223F/Q SB00
        - added support for TSSTcorpCDDVDW SE-T084M TS00/TD00
        - added support for SONY DVD RW DRU-840A SS01
        - added support for TSSTcorpCD/DVDW SH-S162A (NEC clone)

        - added HL-DT-STDVD-RAM GSA-H60@H62 crossflash option          
        - added support for HL-DT-STDVD-RAM GSA-H54N/L 1.02
        - added support for HL-DT-STDVD+-RW GSA-H73N C106
        - verified support for HL-DT-STDVD-RAM GSA-H50N/L 1.02       
        - fixed overspeed patch problem for LG GH20xS10 xL01 firmwares
        - fixed bad MID display for LG GH20xS10 xL01 firmwares
                
        - added support for ASUS DRW-2014x
        - added support for PIONEER DVR-113NP/DVR-213NP 1.01 
          (ASUS DRW-2014x clone)
        - enabled writing of patched ASUS DRW-16/18/20 firmwares
          WARNING: the ASUS support is barely tested

        - added support for Liteon ATAPI iHAS120 7L04
        - fixed bad MID display for NEC 1300, 2510 and 3500 firmwares
          introduced in V1.1.0.12
        - removed 12x DL write speed display on Optiarc DVD RW AD-7170A

Download Changelog

j_doe · **Joined:** Thu Jul 03, 2008 11:13 pm **Posts:** 1

Hi There,

I tried using MCSE 1.1.0.16 (of May/2008) on this one for LG GCC-4244N (an IBM ThinkPad-specific CD-RW/DVD-ROM Combo Drive), but it don't even seem to recognize the file (nor the packed archive & neither the unpacked .DLD firmware-image).

Is there any way to make MCSE patch this one ?

Thanks ahead

Daniel K.

ala42 · **Posted:** Thu Jul 03, 2008 11:43 pm

This is the wrong thread for MCSE questions, please use the MCSE thread next time.
In general MCSE supports only DVD writer, the LG GCC-4244N is no exception to this rule.

Puma · **Posted:** Fri Jul 04, 2008 11:03 am

posts moved to MCSE thread

ala42 · **Posted:** Sun Jul 13, 2008 9:49 pm

MediaCodeSpeedEdit V1.1.0.17 is out

Code:

Changelog
1.1.0.17 13 Jul 2008
        - added support for TSSTcorpCDDVDW SE-S224Q TS00
        - added support for TSSTcorpCDDVDW SN-T083A SB00
        - added support for TSSTcorpDVD+-RW TS-H653B D300 (Dell SH-S203B clone)
        - added support for TSSTcorpCDDVDW TS-H653N
        - added support for TSSTcorpDVD+-RW TS-H653A D500 (Dell SH-S183A clone)
        - fixed TSSTcorpCDDVDW SH-S223F/Q write speed display

        - added decrease DVD read speed patch for LG drives to be used as
          replacement drives in stand alone recorder, e.g. LG RH177, RH188
          GSA-H1x/H4x/H6x/GH20 firmwares: read speed is 2x-6x
          GSA-H2x/H3x/H5x/H7x  firmwares: read speed is 3.4x-8x
          The SATA drives in this list can not be used in stand alone devices.
        - added LG GSA-E40x@H4nx crossflash option
        - added LG GSA-H55x@H50x crossflash option
        - added LG GSA-S10N crossflash option
        - added LG GMA-4082N RPC2 auto reset patch

        - added support for SONY DVD RW DRU-190S 1.62 (Liteon DH20A3S) clone
        - added support for SONY DVD RW DRU-190A 1.65 (Liteon DH20A3P) clone

        - added support for PLEXTOR DVDR PX-810SA 1.01 (Pioneer 212 clone)

Download Changelog

Puma · **Posted:** Sun Jul 13, 2008 11:06 pm

great, thanks for the update ala

Gradius · **Posted:** Mon Jul 21, 2008 11:09 pm

Hi,

I just got the LG GH22NP20, I was unable to find GSA-H55N (20x) anymore here, so I got GH22N (22x) instead.

I was trying to find a firmware for it, but it seems LG didn't released a thing yet, or I'm missing something?

Will MCSE support this (GH22N) [*profanity*] drive?

Thanks,
Gradius

Puma · **Posted:** Mon Jul 21, 2008 11:16 pm

Gradius wrote:

Hi,

I just got the LG GH22NP20, I was unable to find GSA-H55N (20x) anymore here, so I got GH22N (22x) instead.

I was trying to find a firmware for it, but it seems LG didn't released a thing yet, or I'm missing something?

Will MCSE support this (GH22N) [*profanity*] drive?

Thanks,
Gradius

nope, your not missing anything, has been no update for this LG drive, sure MCSE will support it, when LG release a firmware

Gradius · **Posted:** Mon Jul 21, 2008 11:45 pm

Cool, thanks Puma!

Gradius

drhhitman · **Joined:** Sun Apr 13, 2008 1:47 am **Posts:** 2

I have just downloaded the 9P58 firmware version for the DH-20A3S liteon drive and unfortunately MCSE will not load the firmware. It just sits there within the program and as though nothing was loaded. Now i understand that MCSE may not yet support 9P58, however, i get the exact same outcome with the 9P56 firmware version and was wondering if anyone else is having the same problem.

ala42 · **Posted:** Thu Jul 24, 2008 11:03 am

You have to use an unscrambled firmware flasher or dumped .bin file.

here2rock · **Joined:** Thu Jul 31, 2008 10:30 am **Posts:** 9

I have a pioneer DVR215.

I am having trouble loading the 1.18 firmware in MCSE. I downloaded from Japan site.

I can extract the .exe file and load S0014001.118 file and then save the file as S0014001_speedpatched but how do I flash the firmware?

I am trying to set the drive to bitsetting.

Puma · **Posted:** Thu Jul 31, 2008 11:04 am

here2rock wrote:

I have a pioneer DVR215.

I am having trouble loading the 1.18 firmware in MCSE. I downloaded from Japan site.

I can extract the .exe file and load S0014001.118 file and then save the file as S0014001_speedpatched but how do I flash the firmware?

I am trying to set the drive to bitsetting.

rename it to the original, if your flashing rpc1, patch the flasher also

here2rock · **Joined:** Thu Jul 31, 2008 10:30 am **Posts:** 9

I renamed the patched file to the original name. I am still getting the error message FW is already latest.

Do I need to use DVRFlash to update the firmware?

I do need a quick tutorial on using DVRFlash.

Puma · **Posted:** Thu Jul 31, 2008 11:23 am

here2rock wrote:

I renamed the patched file to the original name. I am still getting the error message FW is already latest.

Do I need to use DVRFlash to update the firmware?

I do need a quick tutorial on using DVRFlash.

have you loaded the flasher into MCSE, and ticked allow same to same flash?

here2rock · **Joined:** Thu Jul 31, 2008 10:30 am **Posts:** 9

When I run the official firmware file I have three files as follow:

R215, which is the exe file
S0014000.118
S0014001.118

When I load the R215 file in MCSE, nothing happens, it says ODD Firware Update Utility.

Then I load the S0014001.118 file, It loads up correctly.

Then I ticked druve setting and enable bitsettting.

Save the file as S0014001_speedpatched.

Deleted the original S0014001.118 file.

Renamed the S0014001_speedpatched to S0014001.118.

Ran R215, same error FW is already latest.

Then I tried DVRFlash. Copied the file to C:\DVR215 directory.

Then I ran cmd changed the directory to C:DVR215

Typed in DVRFlash -vf h: S0014000.118 S0014001.118

It worked!

How do I test it now whether it can do bitsetting now?

Puma · **Posted:** Thu Jul 31, 2008 12:05 pm

Quote:

How do I test it now whether it can do bitsetting now?

its done automatically, burn a disc, then check it in dvdinfo or nero, out of interest what version of MCSE have you got? just tested and the allow same to same flashing option works fine with the 215, its right at the bottom

here2rock · **Joined:** Thu Jul 31, 2008 10:30 am **Posts:** 9

I am using the 1.1.0.17 version.

I ticked the bitsetting option when I patched the file. What is the RPC1 patch file for?

Puma · **Posted:** Thu Jul 31, 2008 12:39 pm

here2rock wrote:

I am using the 1.1.0.17 version.

I ticked the bitsetting option when I patched the file. What is the RPC1 patch file for?

makes the drive region free

here2rock · **Joined:** Thu Jul 31, 2008 10:30 am **Posts:** 9

Can I run the patched firmware file, patch it for region free then flash it again?

Or do I patch the original firmware file from Pioneer, the patch it for increased speeds, bitsetting and region free?

Uh, I forgot to thank you Puma, how rude of me! You have been very helpful and walking me through flashing steps.

Puma · **Posted:** Thu Jul 31, 2008 1:52 pm

Quote:

Can I run the patched firmware file, patch it for region free then flash it again?

yes, just add the RPC1 patch, to the one you have, and then reflash to the drive

here2rock · **Joined:** Thu Jul 31, 2008 10:30 am **Posts:** 9

I patched the file, then flashed the patched firmware.

When I tried the different region discs, it asked me whether I wanted to the change the region from 4 to 1 or 4 to 1.

Region settings remaining now are about 3 times.

What am I doing wrong?

The Firmware Page

MCSE Thread (Version 1.2.0.10 - 2011.10.03)

Who is online