The Firmware Page

It is currently Thu Oct 30, 2014 2:42 pm


Post new topic Reply to topic  [ 292 posts ]  Go to page 1, 2, 3, 4, 5 ... 12  Next
Author Message
 PostPosted: Wed Mar 12, 2008 11:53 pm 
Administrator
Administrator

Joined: Tue May 11, 2004 3:02 pm
Posts: 10125
Location: UK
The following Kernel and firmware files are now being made available to all Members of RPC1, these will allow you, with the use of DVRFlash 2.xx, to crossflash your drive to one of the versions listed.

An example is crossflashing a 212D--------->212

presuming the drive letter here is D

dvrflash.exe -ff D: S0013000.122 S0013001.122

Pioneer DVR-117/117F+217L Firmware and Kernel Files

http://files.rpc1.org/uploads/DVR-117_107.zip

http://files.rpc1.org/uploads/DVR-117F_107.zip

http://files.rpc1.org/uploads/DVR-217L_107.zip

****Please use DVRFlash 2.7.3 for the Pioneer 117/217 Drives****


Pioneer DVR-A16 (Retail) Firmware and kernel

Firmware/DVRA16_106.zip

Pioneer DVR-A16J Firmware and kernel

http://files.rpc1.org/uploads/DVR-A16J-106.zip (Thanks to Chef)

Pioneer DVR-S16J Firmware and Kernel - Note this is for SATA Drives only!!

Firmware/DVRS16J_106.zip

Pioneer A15J/115/115D

dl_file.php?site=firmx&file=DVRA15J.zip
dl_file.php?site=firmx&file=DVR115.zip
dl_file.php?site=firmx&file=DVR115D.zip RPC1

Pioneer 212/215/S15J SATA Only!

dl_file.php?site=firmx&file=DVR212.zip
dl_file.php?site=firmx&file=DVRS15J.zip
dl_file.php?site=firmx&file=DVR215.zip

111L Kernel and Firmware (RPC1+Bitsetting)

http://sony0.rpc1.org/111L_kernel_firmware.zip

112 Kernal and Firmware (RPC1)

http://sony0.rpc1.org/DVR112.zip


DVRFlash 2.7.x Thread

Please be aware of you own drives model/number, 212/215/S15J are sata drive firmwares, please do not attempt to flash them to a PATA drive, From 2.5.1 DVRFlash blocks attempts to misflash pata>sata and vice versa

Also Please Understand that you CANNOT crossflash a 112>115 or a 212>215 or 215>216, 215/6>217 Please do not attempt this

_________________
Read The FAQImageFirmware Request RulesImage
MCSE Thread Utilities


Last edited by Puma on Sat Apr 19, 2008 12:23 pm, edited 12 times in total.

Top
 Profile  
 
 PostPosted: Thu Mar 13, 2008 2:12 am 
Rookie

Joined: Fri Mar 05, 2004 12:19 pm
Posts: 5
Any luck with the S12J kernel by chance?


Top
 Profile  
 
 PostPosted: Thu Mar 13, 2008 2:22 am 
Junior Member

Joined: Mon Jun 16, 2003 2:06 am
Posts: 32
Inside the file DVR212.ZIP the are 2 files:

1) S0013000.122
2) S0013001.124

I asume one is normal the other is kernel file but from differents ver FW.
So is it possible to crossflash, using 2 different version files?



Edited:
Thanks!!!,

I patch the normal file with MSCE utlity.
I crossflash a 212D to a 212 using:

dvrflash -ff [drive letter]: S0013000.122 S0013001.124

Now I have a Pioneer DVR 212 with
RPC1,
DVDRAM,
BITSETING
and READ SPEED INCREASE

Only is missing labelflash to be perfect.


Last edited by juanaltamira on Thu Mar 13, 2008 3:32 am, edited 3 times in total.

Top
 Profile  
 
 PostPosted: Thu Mar 13, 2008 2:44 am 
Firmware Patcher
User avatar

Joined: Sun Nov 02, 2003 4:18 am
Posts: 993
Location: Germany
Everytime you update just the normal part you have different versions of kernel and normal part on your drive. As Pioneer has not released a newer kernel, all older kernels delivered on drives must be compatible to the current normal part.

_________________
LiteOn/Benq/LG/NEC/Pioneer/Samsung/Toshiba stuff: MediaCodeSpeedEdit V 1.2.0.10, released October 3rd 2011


Top
 Profile  
 
 PostPosted: Thu Mar 13, 2008 7:08 am 
New Member

Joined: Thu Mar 13, 2008 5:30 am
Posts: 3
Location: Philippines
can i use this to crossflash my dvr-115bxl to a dvr-s15j??


if yes, what would be my parameter?

dvrflash -ff [drive letter]: A0014001.118 S0414431.118 (is this correct)


also, can you crossflash a dvr-112 to dvr-115?


thanks in advance


Top
 Profile  
 
 PostPosted: Thu Mar 13, 2008 10:29 am 
Administrator
Administrator
User avatar

Joined: Fri Aug 09, 2002 11:39 am
Posts: 23692
Location: .de #...still playing LLAMATRON 2112!
ferdz_33 wrote:
can i use this to crossflash my dvr-115bxl to a dvr-s15j??


if yes, what would be my parameter?

dvrflash -ff [drive letter]: A0014001.118 S0414431.118 (is this correct)


also, can you crossflash a dvr-112 to dvr-115?


thanks in advance


No, never!

_________________
.:The rpc1.org FAQ:. Please read & follow our firmware request rules precisely! .:The DiscInfo tool:.

I am looking for DVD-R for Authoring DVD-R (A) & HD-DVD media, any size, any brand. Please pm me if you can help. \:D/

Top
 Profile  
 
 PostPosted: Thu Mar 13, 2008 11:31 am 
Administrator
Administrator

Joined: Tue May 11, 2004 3:02 pm
Posts: 10125
Location: UK
ferdz_33 wrote:
can i use this to crossflash my dvr-115bxl to a dvr-s15j??


if yes, what would be my parameter?

dvrflash -ff [drive letter]: A0014001.118 S0414431.118 (is this correct)


also, can you crossflash a dvr-112 to dvr-115?


thanks in advance


nope, don't even try this

Quote:
Any luck with the S12J kernel by chance?


afraid not

_________________
Read The FAQImageFirmware Request RulesImage
MCSE Thread Utilities


Top
 Profile  
 
 PostPosted: Thu Mar 13, 2008 8:22 pm 
Professional Poster
User avatar

Joined: Tue Feb 10, 2004 7:17 pm
Posts: 66
Location: Austria and M2D
Did someone test the DVRS15J file?

I use this parameter:

DVRFlash.exe -vff K: S0414430.114 S0414431.118

After sending the kernelpart DVRFlash wrote:

Connection to device lost--

Now the 115D is dead.

The same problem had also another!?

Still can someone confirm??

:cry:


Top
 Profile  
 
 PostPosted: Thu Mar 13, 2008 8:28 pm 
Administrator
Administrator

Joined: Tue May 11, 2004 3:02 pm
Posts: 10125
Location: UK
gaz_2 wrote:
Did someone test the DVRS15J file?

I use this parameter:

DVRFlash.exe -vff K: S0414430.114 S0414431.118

After sending the kernelpart DVRFlash wrote:

Connection to device lost--

Now the 115D is dead.

The same problem had also another!?

Still can someone confirm??

:cry:


Gaz, there is nothing wrong with the files, you have misflashed your drive, the DVRS15J files are for Sata drives, not the 115D ata model, if the drive is not seen in windows, then use dos version, if it is seen, try flashing with the 115 kernel and firmware

_________________
Read The FAQImageFirmware Request RulesImage
MCSE Thread Utilities


Top
 Profile  
 
 PostPosted: Thu Mar 13, 2008 8:55 pm 
Professional Poster
User avatar

Joined: Tue Feb 10, 2004 7:17 pm
Posts: 66
Location: Austria and M2D
The dos version don


Top
 Profile  
 
 PostPosted: Thu Mar 13, 2008 11:16 pm 
Firmware Patcher
User avatar

Joined: Mon Aug 23, 2004 10:39 am
Posts: 282
Location: Monkey Island
I guess flashing a PATA drive with a SATA bricked your drive. The only way that might be able to recover your drive would be using an external flash hardware and soldering the flash chip. But even that's not guaranteed to work. You will probably end up having to buy a new drive.

_________________
Flash or dump your NEC or Optiarc DVD burner firmware on Mac, Windows, DOS or Linux with Binflash.
Visit Liggy's and Dee's NEC and Optiarc firmware and tools page.


Top
 Profile  
 
 PostPosted: Thu Mar 13, 2008 11:44 pm 
Professional Poster
User avatar

Joined: Tue Feb 10, 2004 7:17 pm
Posts: 66
Location: Austria and M2D
Okay, thx. :(

_________________
BenQ1640 RPC1 BSRB TDB MCSE-speedpatched
Pioneer 215@215L 1.22 MCSE-speed/Bitsetting patched
Pioneer 112D@112L 1.28 MCSE-speedpatched
Pioneer 216D@216L 1.09 MCSE speedpatched
Pioneer 217F@217L 1.07 MCSE-speedpatched


Top
 Profile  
 
 PostPosted: Thu Mar 13, 2008 11:45 pm 
Administrator
Administrator

Joined: Tue May 11, 2004 3:02 pm
Posts: 10125
Location: UK
sounds fatal, usually the drive will go into safemode, obviously using the sata firmware on it, has changed this, i take it windows doesn't see it anymore

_________________
Read The FAQImageFirmware Request RulesImage
MCSE Thread Utilities


Top
 Profile  
 
 PostPosted: Fri Mar 14, 2008 12:00 am 
Firmware Patcher
User avatar

Joined: Mon Aug 23, 2004 10:39 am
Posts: 282
Location: Monkey Island
Safemode simply means that the drive stays in kernel mode. But with the kernel (and even main firmware) being SATA, access to the drive won't be possible because the drive's controller is not SATA

_________________
Flash or dump your NEC or Optiarc DVD burner firmware on Mac, Windows, DOS or Linux with Binflash.
Visit Liggy's and Dee's NEC and Optiarc firmware and tools page.


Top
 Profile  
 
 PostPosted: Fri Mar 14, 2008 7:50 am 
New Member

Joined: Thu Mar 13, 2008 5:30 am
Posts: 3
Location: Philippines
thanks to all your replies. good thing im a patient one and waited for your replies or i would have nuke my drive. 8O

are there any kernel for dvr-a15j (PATA version of dvr-s15j)???

also if said kernel would be available can i be able to patch my dvr-115bxl with the a15j?

again, thanks very much


Top
 Profile  
 
 PostPosted: Fri Mar 14, 2008 9:31 am 
Administrator
Administrator
User avatar

Joined: Fri Aug 09, 2002 11:39 am
Posts: 23692
Location: .de #...still playing LLAMATRON 2112!
gaz_2 wrote:
I use this parameter:

DVRFlash.exe -vff K: S0414430.114 S0414431.118

After sending the kernelpart DVRFlash wrote:

Connection to device lost--



As said many times before, never use that option!!
Either use -v, -f or if you know what you are doing -ff!

_________________
.:The rpc1.org FAQ:. Please read & follow our firmware request rules precisely! .:The DiscInfo tool:.

I am looking for DVD-R for Authoring DVD-R (A) & HD-DVD media, any size, any brand. Please pm me if you can help. \:D/

Top
 Profile  
 
 PostPosted: Fri Mar 14, 2008 11:53 am 
Administrator
Administrator

Joined: Tue May 11, 2004 3:02 pm
Posts: 10125
Location: UK
ferdz_33 wrote:
thanks to all your replies. good thing im a patient one and waited for your replies or i would have nuke my drive. 8O

are there any kernel for dvr-a15j (PATA version of dvr-s15j)???

also if said kernel would be available can i be able to patch my dvr-115bxl with the a15j?

again, thanks very much


there is no Kernel for the A15J at the moment, if it were to come available, you could do, what you ask

_________________
Read The FAQImageFirmware Request RulesImage
MCSE Thread Utilities


Top
 Profile  
 
 PostPosted: Sat Mar 15, 2008 4:19 pm 
Administrator
Administrator

Joined: Tue May 11, 2004 3:02 pm
Posts: 10125
Location: UK
A15J kernel and firmware is now available, see first post, this add's LabelFlash, please note the drive id will be 115L when flashed

_________________
Read The FAQImageFirmware Request RulesImage
MCSE Thread Utilities


Top
 Profile  
 
 PostPosted: Sat Mar 15, 2008 7:18 pm 
New Member

Joined: Sat Mar 15, 2008 6:59 pm
Posts: 4
Need a little help flashing on Vista. I get the following error message after entering the following (in Vista safe mode using dvrflash ver 2.5):

dvrflash -ff h: s0013000.122 s0013001.124

Could not open device \\. \H:

I have no disk in the drive. Any suggestions?

Drive is Pioneer DVR-212D.

There is no disk in the H: drive so if I type h: I get "The device is not ready." Put a disk in and I can switch to it and see the AUDIO_TS and VIDEO_TS directories so I have the correct drive letter. But it is my understanding that flashing is always done with no disk so I have not tried.

Turbo3


Top
 Profile  
 
 PostPosted: Sat Mar 15, 2008 7:56 pm 
Administrator
Administrator
User avatar

Joined: Fri Aug 09, 2002 11:39 am
Posts: 23692
Location: .de #...still playing LLAMATRON 2112!
I suggest using SAFE MODE.

What exact controller is it connected to?

_________________
.:The rpc1.org FAQ:. Please read & follow our firmware request rules precisely! .:The DiscInfo tool:.

I am looking for DVD-R for Authoring DVD-R (A) & HD-DVD media, any size, any brand. Please pm me if you can help. \:D/

Top
 Profile  
 
 PostPosted: Sat Mar 15, 2008 8:09 pm 
New Member

Joined: Sat Mar 15, 2008 6:59 pm
Posts: 4
Actually, I did say I was using SAFE MODE. The Southbridge chip is an Intel ICH9R. DVDInfoPro has no trouble seeing the drive in normal mode as drive H: and reading firmware version an other drive info.

Turbo3


Top
 Profile  
 
 PostPosted: Sat Mar 15, 2008 8:26 pm 
Administrator
Administrator

Joined: Tue May 11, 2004 3:02 pm
Posts: 10125
Location: UK
Turbo3 wrote:
Actually, I did say I was using SAFE MODE. The Southbridge chip is an Intel ICH9R. DVDInfoPro has no trouble seeing the drive in normal mode as drive H: and reading firmware version an other drive info.

Turbo3


make sure by inputting DVRFlash -v , if it is H, then use the same command line but with DVRFlash.exe

_________________
Read The FAQImageFirmware Request RulesImage
MCSE Thread Utilities


Top
 Profile  
 
 PostPosted: Sat Mar 15, 2008 8:52 pm 
New Member

Joined: Sat Mar 15, 2008 6:59 pm
Posts: 4
Here is what I get.

dvrflash.exe -v

(response)
Commandline:
c:/../dvrflash.exe -v

Device parameter was not given, detecting all DVR drives:

No DVR drive detected!

I tried this without and with a DVD in the tray and get the same results. With a DVD in it I can switch to H: and type DIR and see the DVD directories AUDIO_TS and VIDEO_TS. Device Manager lists PIONEER DVD-RW DVR-212D at location 5 on the General Tab of DVD-RW properties.

Turbo3


Top
 Profile  
 
 PostPosted: Sat Mar 15, 2008 10:17 pm 
Administrator
Administrator
User avatar

Joined: Fri Aug 09, 2002 11:39 am
Posts: 23692
Location: .de #...still playing LLAMATRON 2112!
Turbo3 wrote:
Actually, I did say I was using SAFE MODE. The Southbridge chip is an Intel ICH9R. DVDInfoPro has no trouble seeing the drive in normal mode as drive H: and reading firmware version an other drive info.

Turbo3


Is RAID disabled in the BIOS?

_________________
.:The rpc1.org FAQ:. Please read & follow our firmware request rules precisely! .:The DiscInfo tool:.

I am looking for DVD-R for Authoring DVD-R (A) & HD-DVD media, any size, any brand. Please pm me if you can help. \:D/

Top
 Profile  
 
 PostPosted: Sun Mar 16, 2008 12:22 am 
Administrator
Administrator

Joined: Tue May 11, 2004 3:02 pm
Posts: 10125
Location: UK
Looks like the chipset is causing an issue, -v is picking up no drives, try what chef posted and post back

_________________
Read The FAQImageFirmware Request RulesImage
MCSE Thread Utilities


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 292 posts ]  Go to page 1, 2, 3, 4, 5 ... 12  Next


Who is online

Users browsing this forum: Google [Bot] and 4 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
Style based on FI Subice by phpBBservice.nl