MCSE Thread (Version 1.2.0.10 - 2011.10.03)

davidmcc · **Posted:** Wed Dec 19, 2007 4:13 am

Sort of, the original firmware can be flashed to the 62L drive unaltered (he just downloaded it and it will flash), my friend just did it. What LG should have done is when you try to flash the 62N firmware to a 62L drive it should say no drive found. Maybe they never thought of it happening. Thanks for the replying.

ala42 · **Posted:** Wed Dec 19, 2007 4:45 am

He used the GSAH62N_CL01-T0.exe from the german LG site and it allowed to flash a H62L without patching it with MCSE first ? The part MCSE patches to allow this crossflash looks like that crossflashing is prevented in this flasher.

davidmcc · **Posted:** Wed Dec 19, 2007 4:58 am

Yes it can flash the 62L without patching. Well he did try to save the drive id as 62L in MCSE but it doesn't work, it's still a 62N when it flashes. I don't think there will be a native 62L firmware (no request just speculating) i don't know why but LG isn't exactly speedy with any firmware updates for most drives.

dirtbiker · **Posted:** Wed Dec 26, 2007 9:39 am

I canot patch original GSAH55L_1.03.exe FW with MCSE newest version 11012.
Message: "FW seems to be packet" But I'm unable to unpack it with winrar, winzip or 7-zip?
What doing wrong?

Puma · **Posted:** Wed Dec 26, 2007 1:23 pm

dirtbiker wrote:

I canot patch original GSAH55L_1.03.exe FW with MCSE newest version 11012.
Message: "FW seems to be packet" But I'm unable to unpack it with winrar, winzip or 7-zip?
What doing wrong?

have a read of the cdfreaks thread

http://club.cdfreaks.com/f91/mediacodes ... rs-133858/

dirtbiker · **Posted:** Fri Dec 28, 2007 7:57 am

Works fine for GSAH55L_1.03.exe how at cdfreas thread written. Thanks.

But for new Version GSAH55L_1.05.exe the RPC1 patch isn't enablet?

Have I to wait for a new MCSE version?

Puma · **Posted:** Fri Dec 28, 2007 11:48 am

Quote:

Have I to wait for a new MCSE version?

yes you will need to wait for the next release for it to be included

ala42 · **Posted:** Thu Jan 03, 2008 1:42 am

MediaCodeSpeedEdit V1.1.0.13 is out

Code:

Changelog
1.1.0.13 03 Jan 2008
        - added support for HL-DT-ST DVDRAM GH20LS10 FL00
          Thanks to 2601 for the tests.
        - added HL-DT-STDVD-RAM GSA-H55x 1.05 RPC1 patch
          Thanks to dirtbiker for the tests.
        - added riplock patch for GSA-T20N/T21N
          Thanks to tiberia for the tests.
        - enabled LG GSA-H55@H50 crossflash
        - changed drive id display for some Renesas firmwares to contain
          real drive name and firmware date

        - added support for Buffalo PIONEER DVD-RW DVR-112x/212 8.25 firmware
          and flasher, including RPC1 patch
          Thanks to PumaUK for the test.          
        - Thanks to DVD-VIP for testing the Pioneer K15 1.17 bitset patch

        - added support for Optiarc DVD RW AD-5200A, 7200A/S, 7203A/S 1.01

Download Changelog

chef · **Posted:** Thu Jan 03, 2008 10:37 am

Excellent! [-o<

vlasovas · **Joined:** Thu Jan 24, 2008 8:23 pm **Posts:** 3

please help, i need tutorial for MCSE
I'm currently running the RPC1 firmware (1.15) on my pioneer drive (212D). I would like to update to the official 1.22 firmware. When I try running the official updater I get the following messages:

Code:
The firmware of the target drive is not the correct F/W
This firmware is not supported by this program

Any idea how I upgrade this drive from it's current firmware?
in other post I see this:

[You need to use MediaCodeSpeedEdit tool (http://ala42.cdfreaks.com/MCSE) and patch both the Offical Pionner DVR-122D v1.22 Flasher and Firmware.]

I do not know as to use this MCSE, somebody it can give a one tutorial? sorry my English

ala42 · **Posted:** Fri Jan 25, 2008 2:53 pm

Follow the link in my signature, then follow the link to the Pioneer thread where you find instructions.

Do not send more PMs, ask your questions here.

Puma · **Posted:** Fri Jan 25, 2008 3:23 pm

@please do not crosspost, answered you last night, previous posts deleted

vlasovas · **Joined:** Thu Jan 24, 2008 8:23 pm **Posts:** 3

ala42 wrote:

Follow the link in my signature, then follow the link to the Pioneer thread where you find instructions.

Do not send more PMs, ask your questions here.

sorry !
ok forgives for the errors does not understand the English very, but I am understanding
I made this but well he is not specified let us say that I want to move for this DVR212D_FW124EU has the UPR12TD.exe archive that is the executable one and has the S0813001.124 archive that I believe I amwhere I have the information which I load in the MCSE to make thechanges? it has that to import line for line?
made this I save, but the name of the archive bred is another one has that to rename it for what I have currently that is the 115 or for the 124 that is this?
it forgives the English I am using translating, please I want to beable to leave this firmware 115 rcp1 to be able to always bring update that 212d

Puma · **Posted:** Fri Jan 25, 2008 3:32 pm

http://club.cdfreaks.com/f87/mediacodes ... rs-153213/

vlasovas · **Joined:** Thu Jan 24, 2008 8:23 pm **Posts:** 3

PumaUK wrote:

http://club.cdfreaks.com/f87/mediacodespeededit-support-pioneer-dvd-writers-153213/

ok, sorry my errors ! i see the post

ala42 · **Posted:** Sun Feb 03, 2008 9:43 pm

MediaCodeSpeedEdit V1.1.0.14 is out

Code:

Changelog
1.1.0.14 03 Feb 2008
        - added support for PIONEER DVD-RW DVR-115x/A115/215x/S15x
          Read speed patch allows 16x reading of 8x +R/-R media.          
          Pressed DL and +-RW/RDL media are read at 6.9x start, 
          16x max speed, which might be too fast. Feedback is welcome.
          Bitset,RPC1 and flasher patches are available.
          Thanks to PumaUK and zebadee for the tests.
        - added support for PIONEER DVD-RW  DVR-K16 1.42/1.44
          Thanks to cvs for the 1.44 tests

        - added read only support for LG GGC-H20N/L and LG GGW-H20N/L,
          including BD media support
          
        - added support for TSSTcorpCDDVDW SH-S203S/SE-S204S TS00
        - added support for TSSTcorpCDDVDW SN-S083A/L SB00
        - added support for TSSTcorpCDDVDW TS-H653D TG00

Download Changelog

chef · **Posted:** Sun Feb 03, 2008 10:17 pm

Very nice, ala42! =D>

One question I may ask, what is behind " - added read only support for LG GGC-H20N/L and LG GGW-H20N/L, including BD media support " ?
Is it just to readout the MID info from the firmwares? Thanks.

ala42 · **Posted:** Sun Feb 03, 2008 10:28 pm

Yes. It is just read only because patches or crossflashes were not tested on drives.

chef · **Posted:** Wed Feb 06, 2008 11:09 am

Ah, thanks!

tal_oron · **Joined:** Wed Feb 20, 2008 10:10 pm **Posts:** 2

Hey guys,

After flashing to 1.21 / 1.22 / 1.24 on my DVR-212D and using MediaCodeSpeedEdit 1.1.0.14 to enable bit settings - I am still unable to change it (using nero 7.10) to DVD-ROM, even that it said to support it.

I don't know if that's how it suppose to work but - on all firmware versions - when I press the RPC1 it is becoming gray and unable to switch back - and the same goes to the exe file check box thingy
Saving and flashing is successful

Need HELP PLEASE - Desperately

Thx

Backfire · **Posted:** Wed Feb 20, 2008 10:41 pm

Arrrghhh - can you please post it in one Forum only?
There is no need to triplicate your post!

I deleted the other once...

Anyway - welcome to RPC1!

Coaster · **Joined:** Fri Dec 06, 2002 2:18 am **Posts:** 635

@ tal_oron,

Welcome to the Forum.

Have you reviewed the extensive documentation provided in the CD Freaks Pioneer DVD Forum Read First sticky titled

Puma · **Posted:** Wed Feb 20, 2008 11:48 pm

tal_oron wrote:

Hey guys,

After flashing to 1.21 / 1.22 / 1.24 on my DVR-212D and using MediaCodeSpeedEdit 1.1.0.14 to enable bit settings - I am still unable to change it (using nero 7.10) to DVD-ROM, even that it said to support it.

I don't know if that's how it suppose to work but - on all firmware versions - when I press the RPC1 it is becoming gray and unable to switch back - and the same goes to the exe file check box thingy
Saving and flashing is successful

Need HELP PLEASE - Desperately

Thx

thread merged with MCSE thread, there is nothing to change for the bitsetting, once you apply the patch and flash it to the drive, its done automatically, nero will never give you the option anyway, as pioneer doesn't officially support bitsetting

tal_oron · **Joined:** Wed Feb 20, 2008 10:10 pm **Posts:** 2

THX!!

ala42 · **Posted:** Fri Feb 22, 2008 12:42 am

tal_oron wrote:

I don't know if that's how it suppose to work but - on all firmware versions - when I press the RPC1 it is becoming gray and unable to switch back - and the same goes to the exe file check box thingy

That is normal. The checkboxes are greyed out because it is not implemented to undo the patch.

The Firmware Page

MCSE Thread (Version 1.2.0.10 - 2011.10.03)

Who is online