The Firmware Page

can anyone have a look at this log for me please and tell me what problem is causing this.....i don't know if its just bad media because i have had some bad burns lately even when i've been using DVDRW's to burn on.





Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 10/09/1999 13:06:00
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 13:54:32

NT-SPTI used
Nero Version: 7.2.0.3
Internal Version: 7, 2, 0, 3

Recorder: <PIONEER DVD-RW DVR-109> Version: 1.58 - HA 1 TA 0 - 7.2.0.3
Adapter driver: <IDE> HA 1
Drive buffer : 2000kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <PIONEER DVD-RW DVR-109 >Version: 1.58 - HA 1 TA 0 - 7.2.0.3
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : SiImage Si3114r5 Port 0 ID 16 DMA: Off
DiskPeripheral : SiImage Si3114r5 Port 0 ID 17 DMA: Off
OtherPeripheral : SI Pseudo Device 0000 Si3114r5 Port 0 ID 31 DMA: Off
CdRomPeripheral : PIONEER DVD-RW DVR-109 nvatabus Port 1 ID 0 DMA: Off

=== CDRom-Device-Map ===
PIONEER DVD-RW DVR-109 E: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 2047MB (2096616kB)
Free physical memory: 1296MB (1327220kB)
Memory in use : 36 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

6.5.2006
===== Disc-Copy over image - 1st step : Copy to image ...

17:05:28 #1 SPTI -1066 File SCSIPassThrough.cpp, Line 290
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAC 00 00 00 00 00 00 00 01 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 24
Buffer x034b3e00: Len x1008

17:05:58 #2 SPTI -1066 File SCSIPassThrough.cpp, Line 290
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAC 00 00 00 00 00 00 00 01 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 24
Buffer x034f4a00: Len x1008

17:06:20 #3 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

17:06:20 #4 Text 0 File SCSIPassThrough.cpp, Line 84
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

17:06:20 #5 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 192KB of Memory

17:06:20 #6 Text 0 File Reader.cpp, Line 124
Reader running

17:06:20 #7 Text 0 File Writer.cpp, Line 113
Writer Image Recorder running

17:06:20 #8 Text 0 File DVDCopy.cpp, Line 292
DVD Track-Information from source disc:
Media Type: DVD-R
S01 T01 Con 0x14 Start 0 Len 1561344 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0)

17:06:20 #9 Text 0 File DVDCopy.cpp, Line 405
Max -1 tracks of 1 allowed to copy
1: 0 - 1561344 = 1561344, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)

17:06:20 #10 Text 0 File Burncd.cpp, Line 3365
Turn on Disc-At-Once, using DVD media

17:06:21 #11 Text 0 File DlgWaitCD.cpp, Line 289
Last possible write address on media: 4718591 (1048:34.41, 9215MB)
Last address to be written: 1561343 (346:57.68, 3049MB)

17:06:21 #12 Text 0 File DlgWaitCD.cpp, Line 301
Write in overburning mode: NO (enabled: CD)

17:06:21 #13 Text 0 File DlgWaitCD.cpp, Line 473
>>> Protocol of DlgWaitCD activities: <<<
=========================================

17:06:21 #14 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - Data (mode 1))
2 indices, index0 (150) not provided
original disc pos #0 + 1561344 (1561344) = #1561344/346:57.69
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1561344 blocks [Image Recorder]
--------------------------------------------------------------

17:06:21 #15 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [Image Recorder] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3197632512, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1561344 | lead-out | 1 | 0x41 | 0x00

17:06:21 #16 Phase 120 File dlgbrnst.cpp, Line 1730
Creating the image for burning

17:06:21 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

17:11:18 #18 Text 0 File WriterStatus.cpp, Line 116
<Image Recorder> start writing Lead-Out at LBA 1561344 (17D300h), length 0 blocks

17:11:19 #19 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

17:11:19 #20 Phase 121 File dlgbrnst.cpp, Line 1730
Creating Image completed successfully



===== Disc-Copy over image - 2nd step : Burn the image ...

17:11:26 #1 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 262144KB of Memory

17:11:26 #2 Text 0 File Reader.cpp, Line 124
Reader running

17:11:26 #3 Text 0 File Writer.cpp, Line 113
Writer E: PIONEER DVD-RW DVR-109 running

17:11:26 #4 IMAGEGEN -10 File ImageGen.cpp, Line 366
Image was written as DAO.
DAOI:
MediaCatalogNumber = ''
TocType = 0x40
Finalized = 1
First/Last Track = 1 / 1
1: ISRC = ''
Blocksize = 2048
TrackMode = 'TRM_DATA_MODE1'
TrackConfig = 0x00
First/Last Index = 0 / 1
Index0FilePos = 0, Index1FilePos = 0, NextTrackFilePos = 3197632512
CUES:
0: Ctrl=0x41 Trk= 0 (0x00) Index=00 Start=00:00.00 ( 0) RecDep=0x00
1: Ctrl=0x41 Trk= 1 (0x01) Index=00 Start=00:00.00 ( 0) RecDep=0x00
2: Ctrl=0x41 Trk= 1 (0x01) Index=01 Start=00:00.00 ( 0) RecDep=0x00
3: Ctrl=0x41 Trk=110 (0xAA) Index=01 Start=346:57.69 ( 1561344) RecDep=0x00
MTYP: Mediumtype = DVD (old format) (0x1C)
Image file name: <C:\Documents and Settings\Jimmy Smithson\My Documents\TempImage.nrg>

17:11:26 #5 Text 0 File Burncd.cpp, Line 3365
Turn on Disc-At-Once, using DVD media

17:12:00 #6 Text 0 File DlgWaitCD.cpp, Line 289
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1561343 (346:57.68, 3049MB)

17:12:00 #7 Text 0 File DlgWaitCD.cpp, Line 301
Write in overburning mode: NO (enabled: CD)

17:12:00 #8 Text 0 File DlgWaitCD.cpp, Line 2715
Recorder: PIONEER DVD-RW DVR-109, Media type: DVD-R
Disc Manufacturer: TTH02 -
Disc Application Code: 64, Disc Physical Code: 193

17:12:00 #9 Text 0 File DlgWaitCD.cpp, Line 473
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD R/RW, DVD R DL.)

17:12:00 #10 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - DVD-ROM)
2 indices, index0 (150) not provided
original disc pos #0 + 1561344 (1561344) = #1561344/346:57.69
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1561344 blocks [E: PIONEER DVD-RW DVR-109]
--------------------------------------------------------------

17:12:00 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [E: PIONEER DVD-RW DVR-109] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3197632512, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1561344 | lead-out | 1 | 0x41 | 0x00

17:12:00 #12 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

17:12:00 #13 Text 0 File SCSIPassThrough.cpp, Line 84
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

17:12:00 #14 Phase 36 File dlgbrnst.cpp, Line 1730
Burn process started at 8x (11,080 KB/s)

17:12:01 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

17:12:01 #16 Text 0 File DVDR.cpp, Line 2786
Recording mode: Sequential Recording Mode

17:12:01 #17 Text 0 File DVDR.cpp, Line 2942
Start write address at LBA 0
DVD high compatibility mode: Yes

17:12:01 #18 Text 0 File Cdrdrv.cpp, Line 8914
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

17:12:11 #19 Text 0 File Cdrdrv.cpp, Line 1214
17:12:11.843 - E: PIONEER DVD-RW DVR-109 : Queue again later

17:13:49 #20 SPTI -1135 File SCSIPassThrough.cpp, Line 290
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 03 00 00 00 20 00 00 00
Sense Area: 0x71 00 03 00 00 00 00 0E 00 00 00 00 0C
Buffer x041b0000: Len x10000
0x00 00 01 BA 44 00 34 92 4D D7 01 89 C3 F8 00 00
0x01 E0 07 EC 81 00 00 9D 4F 4C 9E D4 DB 09 46 D0
0xEA 79 5A ED AC F2 D0 C3 9A 4B 51 1A 84 66 E3 72

17:13:49 #21 CDR -1135 File Writer.cpp, Line 302
Write error
E: PIONEER DVD-RW DVR-109

17:13:49 #22 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

17:13:49 #23 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader

17:13:49 #24 Text 0 File DVDR.cpp, Line 3182
EndDAO: Last written address was 767

17:13:49 #25 Phase 38 File dlgbrnst.cpp, Line 1730
Burn process failed at 8x (11,080 KB/s)


Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 10/09/1999 13:06:00
File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 08/02/2006 01:23:25 (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

can you first check in device manager, under ata/atapi controllers, right click the ide channel of the writer and choose properties, in advanced settings what is the drive running in?

funny you should ask that cos i have checked in there before and it as never shown the DVD burner under the ide/atapi controllers....but it's worked for ages until now.

look you can't see the burner under the ide/atapi controllers




Ps....there is no tab for any Advanced under any of the ide/atapi drivers at all.

that is ok, you never usually see the name of the burner there just the ide channels, would delete everything under the ata/atapi and restart the pc. also use nero info tool and see under configuration and see what the drive is running, DMA or PIO

Hmmm...now Nero won't tell me what mode i am running in...but Device manager is.

Nero info tool



Device manager


Now i have had 4 16x disc fail on me...so i have just tried an 8x DVD-R and a 4x DVD+RW and both burnt fine...so it must be these 16x DVD's.

that is the second thing now, your device is running the correct mode, what are the discs you are using?

Now that is a question to ask...lol

i can't remember what they are a friend give me 6 blank disc to copy some fims for him....there full face printable DVD's with nothing written underneath them either...i'm sure there Datawrite i know its Data something ....i will ask him when he gets home.

sounds like the discs are of poor quality, plus i have my doubts that your pioneer was in dma mode before unistalling the ata/atapi controllers etc.

it deffinately is these disc cos all 6 have failed now...even when i tried to burn the 6th disc on 4X it failed.

i'm positve the drive as always been set on DMA mode because i have noticed it before using another program that says the drive as been running in DMA mode.....this problem as only Occurred when someone as give me cheap media.

datawrite are not the best i'm afraid, least you only got 6 to waste

DMA is off for the pio........