The Firmware Page

not till a firmware has been released for the 110

That's as soon as the firmware for your Pio-110 becomes officially available from Pioneer and Buffalo =)

The Dangerous Brothers will surely come up with the patched firmware.

I have aske the question before but unanswered, maybe I didn't ask it right.

What are the steps to modify the Bisetting on the 110D, the Dangerous Bros. method. Be detailed and where I can get the firmware. Thanks

flash the firmware to the drive and that is it

http://tdb.rpc1.org/#DVR110D

Puma maybe you're too fast for me. LOL

I have firmware 1.22 and the RPCis II not I

Do I download the firmware
"Currently RPC1 with Bitsetting firmware based on 1.22 (Synthesized from 8.22). Drive will remain as regular "GENERAL" model, not Buffalo "OEM_INT" model."

and installe it.

What is this thing with Buffalo 8.22

yes download that, basically the buffalo firmware has bitsetting, so the brothers have used that in the 1.22 pioneer firmware

One of brands that supports bitsetting on thirdparty Pioneer drives... The Dangerous Brothers hacked it and made it possible crossflashing with DVR-110D

Thanks guys I downloaded and updated the firmware and worked ok.

Now the only problem is I have 100 dvd of fijitsu of DVD-R. LOL Well I know its done and its behind me.


One other question, if Prioneer release another update of the firmware, will the new update remove the Bitsetting.

Yes, new firmware completely replaces old firmware, its not an incremental thing.

Brother Vlad

Question - I have now changed the firmware to the new 8.22 cross thing version, and you spoke about changing book type to dvdrom, how do I do this in Nero ?

The Pioneer Drives have BitSetting ENABLEDas a default setting on all +R MEDIA.

.... And cannot be disabled... Only by a new firmware update that don't support it...

Since RPC-1 has been added to current 109 and 110 drives I was wondering. The 110 comes standard with no riplock meaning less work involved. Adding RPC-1 to the buffalo firmware instantly netted all needs accomplished, with the 109 it isn't so easy however. This drive does have riplock enabled meaning we can only have either riplock removed with RPC-1 via A09 firmware OR bitsetting with RPC-1 via Buffalo. Can anyone possibly add riplock removed to the Buffalo RPC-1 firmware to yield all possibilities on this drive as well? Thanks.

Just an addition:

Media Support for DVR-110 series (PDF:44KB)
Media Support for DVR-110D series (PDF:40KB)

http://wwwbsc.pioneer.co.jp/product-e/i ... 03r_e.html

I'm just completly lost here.

Does after flashing the 110D with the 8.22 firmware, every +R disc will be written as (bitset to) DVD-ROM automaticly?

Or is it stil +R, since the drive does not support bitsetting? Or is there a way to change the settings?

Yes

Hi- I have the same problem with my Pioneer DVR-110 and the RPC-1 firmware. Get a messagebox saying "Hardware Revision is not matched" and tried 122 and 822 firmwares.

Here is Discinfo:
DISCINFO VERSION : 1.5.5.9
VENDOR : PIONEER
MODEL : DVD-RW DVR-110
REVISION : 1.22
VENDOR SPECIFIC : 05/09/13 PIONEER
LOADING MECHANISM : Tray
SERIAL NUMBER : EIDC009286WL
NUMBER VOL. LEVELS : 256
BUFFER SIZE : 2000KB
INTERFACE : ATAPI
RPC2 SCHEME : YES
STATUS : Not Set
USER CHANGES : 5
VENDOR CHANGES : 4
CURRENT REGION : Not set
ANALOG AUDIO PLAY : YES
COMPOSITE OUTPUT : NO
DIGITAL PORT-PORT1 : NO
DIGITAL PORT-PORT2 : NO
READ UPC CODE : YES
MULTISESSION READ : YES
MODE 2 FORM 1 : YES
MODE 2 FORM 2 : YES
READ ISRC CODE : YES
READ BAD CODE : NO
BUFFER UNDER-RUN : YES
MT. RAINIER : NO
CAN READ CDR : YES
CAN READ CDRW : YES
CAN READ CDRM2 : YES
CAN WRITE CDR : YES
CAN WRITE CDRW : YES
CAN TEST WRITE : YES
CAN READ DVD-ROM : YES
CAN READ DVD-R : YES
CAN READ DVD-RW : YES
CAN READ DVD-RAM : YES
CAN READ DVD+R : YES
CAN READ DVD+RW : YES
CAN WRITE DVD-R : YES
CAN WRITE DVD-RW : YES
CAN WRITE DVD-RAM : YES
CAN WRITE DVD+R : YES
CAN WRITE DVD+RW : YES
MAX CDR READ SPEED : 40
MAX CDR WRITE SPEED: 40



Any help appreciated!

Peter

You have a 110 not a 110D, we have not released a patched firmware, as Pioneer has not released a firmware update for the 110, only the 110D and A10XL. You can use the A10XL patched firmware, flashing with DVR Flash 2.2 or wait until another firmware is available.

Brother Vlad

AH - Schoolboy error, thanks for pointing that out.

I've flashed about 5 drives now but still apparently no expert at this. I'll give the XL firmware a shot until you do your magic.

Thanks for the quick reply.

Peter

Here is a link to the A10 Quiet Drive Utility for the A10XL.
Works fine on my 110D -> A10XL crossed flashed drive.
A10_QuietDriveUtility.zip

Thanks for the tip, we'll add it to the release post.
http://forum.rpc1.org/viewtopic.php?p=173446#173446

Brother Vlad

thanks for the link

DVR-110D crossflashed to DVR-A10XL done!

Now waiting for bitsetting support for my "new" A10 drive.

The Dangerous Brothers and LasVegas ROCKS!

I have crossed my 110d to a A10XL no worries

I have burnt some -r and +r with success but I don't have any -ram media to try

Has anyone tried some -ram media with the above cross?

I'd just like to confirm that it burns as MCSE didn't have a -ram strategy when I loaded the firmware into it.

For DVD-110D to appear as Apple Shipped / Supported it must have fw version label AA06 and model label DVD-110D. It would be cool if drive could be updated to DVD-110 RPC1 v1.22 with bitsetting and still keep DVD-110D vAA06 label.