Joined: Wed Oct 02, 2002 3:59 pm Posts: 5 Location: Hanoi
I flashed my old Intel Tomato 810 and the flasher showed "successfully flashed" message, but when I restarted, the screen went black and drive A turn on and off. I just add the logo to OEMBIOS.bin file and flashed, and then.. hic hic. How can I flash my BIOS now ? help me.
PS: Anyone has the original BIOS bin file of Intel 810 CU ? Send me at : phungkimcuong@yahoo.com or phungkimcuong@hotmail.com 100000000000000 times thanks
Joined: Thu Jul 04, 2002 5:02 am Posts: 389 Location: Indonesia
Your mainboard is dead, you can buy the BIOS chip, and replace the dead one!
Try to find it in Yahoo.
Last month i also killed my mainboard, and change the BIOS chip, and my dead mainboard had a second chance to life!!!
Joined: Wed Oct 02, 2002 3:59 pm Posts: 5 Location: Hanoi
Thanx for advice, but unfortunately, I cant find the BIOS chip which was replacable ? How I can take the BIOS chip out of mainboard without breaking it ? And by the way, what is your main board's details ?
Plz reply asap ! Thanx again !
Joined: Thu Jul 04, 2002 5:02 am Posts: 389 Location: Indonesia
I use Gigabyte mainboard with PLCC type BIOS chip.
You have to find out where is your BIOS chip in your main board, and which type is it.
Try search the internet to find out where you can buy that chip.
Users browsing this forum: No registered users and 1 guest
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum