|
Portal Board index » .:: Firmware Flashing ::. » DVD-RW/+RW/RAM Firmware
All times are UTC [ DST ]
|
| Author |
Message |
|
|
 Posted: Sun Jun 15, 2003 10:05 pm |
|
Joined: Sun Jun 15, 2003 9:58 pm
Posts: 4
|
first off Herrie nice one 
but iam haveing a problem with datawrite red top, they burn ok at 2x and 4x but they dont verifi
i have tried a a few now with the same problem:(
any help would be grate
ps if you need any firmware hosted let me know
|
|
| Top |
|
 |
|
|
Posted: Sun Jun 15, 2003 10:11 pm |
|
Joined: Fri Jun 13, 2003 8:39 pm
Posts: 5
Location: Denmark
|
mikethegreek wrote: first off Herrie nice one but iam haveing a problem with datawrite red top, they burn ok at 2x and 4x but they dont verifi i have tried a a few now with the same problem:( any help would be grate ps if you need any firmware hosted let me know The same here just Princo 4x
_________________
John K
|
|
| Top |
|
|
|
|
Posted: Sun Jun 15, 2003 10:18 pm |
|
Joined: Fri May 23, 2003 1:47 pm
Posts: 2315
|
|
| Top |
|
|
|
|
Posted: Sun Jun 15, 2003 10:22 pm |
|
Joined: Wed May 14, 2003 10:01 pm
Posts: 41
|
|
| Top |
|
|
|
|
Posted: Sun Jun 15, 2003 10:24 pm |
|
Joined: Fri May 23, 2003 1:47 pm
Posts: 2315
|
|
| Top |
|
|
|
|
Posted: Sun Jun 15, 2003 10:24 pm |
|
Joined: Sun Jun 15, 2003 9:58 pm
Posts: 4
|
just tried a princo white top and i get almost the same.
the write fails on 4x but goes ok on 2x but again the verifi fails 
does any one else have this with
princo white tops and data write red tops ????
|
|
| Top |
|
|
|
|
Posted: Sun Jun 15, 2003 10:49 pm |
|
Joined: Sun Jun 15, 2003 8:18 pm
Posts: 7
|
Quote: Matthy wrote:
I've burned a few DVD+Rs with my NEC ND-1300A and they work fine in a xbox with a thompson dvd-drive and a (some of them) in a xbox with a philips dvd-drive. If you have a samsung drive in your xbox, it won't work (at least without changing the booktype from DVD+R to DVD-ROM).
thx 4 the nfo.. can someone explain me whats all about this booktype thing? is it possible to write DVD+R as DVD-ROM? is it the same with
DVD-R? if so how do i do this? if not can this be changed anytime?
thx
chris
|
|
| Top |
|
|
|
|
Posted: Sun Jun 15, 2003 10:56 pm |
|
Joined: Wed May 14, 2003 10:01 pm
Posts: 41
|
|
@chrjs: The booktype can is the code which is reportet to the (reading) drive. The ND-1300A can not (at least not yet) change the booktype of DVD+R.
Simple solution: Burn your xbox-stuff on DVD-R. DVD-R can be read by every xbox-drive out there.
|
|
| Top |
|
|
|
|
Posted: Sun Jun 15, 2003 10:58 pm |
|
| Humid |
| Professional Poster |
Joined: Tue Jun 03, 2003 11:25 pm
Posts: 93
|
Herrie wrote: I just updated the files  Added support for:INFOK-R01 (2x tested and verified) Removed:1FUJIFILM.. I also moved the CMC MAG.AF01 (4x) so there's more place for a future upgrade  The new files can be found here: Normal: http://212.203.28.251/105xp.rarAuto-reset: http://212.203.28.251/105xpauto.rarFree: http://212.203.28.251/105xpfree.rarYou will notice that the names of the bin-files inside the archives changed into 105yp***.bin I also created some bootcd's with the latest versions of my firmwares: Normal: http://212.203.28.251/bootcdnormal.rarAuto-reset: http://212.203.28.251/bootcdauto.rarFree: http://212.203.28.251/bootcdfree.rarWhen Princo 4x don't work @ 4x you have bad luck. I've got Princo 4x with White Top and they work without any problems! At least the red tops will work @ 2x (it's still better than "Illegal Medium Error")  It's me again. 
So do I need the FAT32-partition for the BOOTCD-version, or will the flashing work without it?
If I need it only to backup the original one, could you (or anyone else) simply upload the default 1.05 FW somewhere?
|
|
| Top |
|
|
|
|
Posted: Sun Jun 15, 2003 11:06 pm |
|
| dhc014 |
| Past Administrator |
 |
Joined: Sun Sep 02, 2001 1:34 am
Posts: 12030
|
|
DOS is unable to natively write to an NTFS formatted disk. There are drivers that let you read from an NTFS hard drive (though through a different drive letter) in DOS, see pioneerdvd.rpc1.org for one, but you cannot write to the NTFS disk. If you are only flashing the drive, then download >NIL:'s boot disk with the DOS NTFS Read-only drivers and flash that way, but if you are backiing up the current firmware, then you should do it on a blank floppy disk or on a FAT partition.
_________________
.: Dave | http://dhc014.rpc1.org | email :.
|
|
| Top |
|
|
|
|
Posted: Sun Jun 15, 2003 11:15 pm |
|
| Humid |
| Professional Poster |
Joined: Tue Jun 03, 2003 11:25 pm
Posts: 93
|
dhc014 wrote: DOS is unable to natively write to an NTFS formatted disk. There are drivers that let you read from an NTFS hard drive (though through a different drive letter) in DOS, see pioneerdvd.rpc1.org for one, but you cannot write to the NTFS disk. If you are only flashing the drive, then download >NIL:'s boot disk with the DOS NTFS Read-only drivers and flash that way, but if you are backiing up the current firmware, then you should do it on a blank floppy disk or on a FAT partition.
But as Im going to use the Herries-premade-bootcd's with the firmware...
Do I need the FAT-partition then? I would need it for backupping, but if someone simply would upload the default 1.05 firmware somewhere - (I live in Finland, dunno which region it is, since Im the über-n00b of the year. )
|
|
| Top |
|
|
|
|
Posted: Sun Jun 15, 2003 11:20 pm |
|
Joined: Fri May 23, 2003 1:47 pm
Posts: 2315
|
Humid wrote: dhc014 wrote: DOS is unable to natively write to an NTFS formatted disk. There are drivers that let you read from an NTFS hard drive (though through a different drive letter) in DOS, see pioneerdvd.rpc1.org for one, but you cannot write to the NTFS disk. If you are only flashing the drive, then download >NIL:'s boot disk with the DOS NTFS Read-only drivers and flash that way, but if you are backiing up the current firmware, then you should do it on a blank floppy disk or on a FAT partition. But as Im going to use the Herries-premade-bootcd's with the firmware... Do I need the FAT-partition then? I would need it for backupping, but if someone simply would upload the default 1.05 firmware somewhere - (I live in Finland, dunno which region it is, since Im the über-n00b of the year. ) When you use my bootcd in your normal cd-rom/cd-r/dvd-rom drive then you can just flash your NEC from the bootcd. I just won't work when the bootcd is in the NEC!
The backup can be found at Etna's site
|
|
| Top |
|
|
|
|
Posted: Sun Jun 15, 2003 11:50 pm |
|
Joined: Mon Jun 02, 2003 7:58 pm
Posts: 26
|
Herrie wrote: Quote: I also moved the CMC MAG.AF01 (4x) so there's more place for a future upgrade
That's the verbatim we tested, right?
Is it now included in the firmwares in your links?
And just so you all know: the Verbatim dvd-r 2x (with the media code above) are actually 4x in disguise. I've tried a few (movies, ps2) and they all work properly in 4x.
And thats all thanks to Herrie!!!
|
|
| Top |
|
|
|
|
Posted: Mon Jun 16, 2003 12:24 am |
|
Joined: Fri Jun 13, 2003 6:16 pm
Posts: 3
|
00 42 00 00 01 40 C1 FD 9E D8 50 00 02 7A 0C 15 .B...@....P..z..
77 78 90 00 03 45 75 72 6F 44 69 00 04 67 2D 44 wx...EuroDi..g-D
69 73 63 00 05 CC C0 00 00 00 01 00 00 00 00 00 isc.............
Some one can add MMORE support,??? remove some media, please... i have expend 250€ in MMORE media's
Some one can create a MMORE firmware ??? please
I HOPE SO
|
|
| Top |
|
|
|
|
Posted: Mon Jun 16, 2003 12:30 am |
|
| Humid |
| Professional Poster |
Joined: Tue Jun 03, 2003 11:25 pm
Posts: 93
|
Herrie wrote: Humid wrote: dhc014 wrote: DOS is unable to natively write to an NTFS formatted disk. There are drivers that let you read from an NTFS hard drive (though through a different drive letter) in DOS, see pioneerdvd.rpc1.org for one, but you cannot write to the NTFS disk. If you are only flashing the drive, then download >NIL:'s boot disk with the DOS NTFS Read-only drivers and flash that way, but if you are backiing up the current firmware, then you should do it on a blank floppy disk or on a FAT partition. But as Im going to use the Herries-premade-bootcd's with the firmware... Do I need the FAT-partition then? I would need it for backupping, but if someone simply would upload the default 1.05 firmware somewhere - (I live in Finland, dunno which region it is, since Im the über-n00b of the year. ) When you use my bootcd in your normal cd-rom/cd-r/dvd-rom drive then you can just flash your NEC from the bootcd. I just won't work when the bootcd is in the NEC! The backup can be found at Etna's site Since I've only the NEC connected, will it work this way:
I'll make a FAT32-partition, boot from the bootCD (which is in the NEC), then change drive to the FAT32-partition (where the flash-hack is), and flash from there?
|
|
| Top |
|
|
|
|
Posted: Mon Jun 16, 2003 12:34 am |
|
| Humid |
| Professional Poster |
Joined: Tue Jun 03, 2003 11:25 pm
Posts: 93
|
|
Perhaps this is thousand times better way to ask help.
How should I flash my ND-1300A? I don't need the commands, just - how to boot and so on...
System configuration is following:
OS: W2k
HDD: 3x NTFS-partitioned. (I've PM8 though.)
CD/DVD-Drives: Only the ND-1300A.
Floppy Disk Drive: None connected.
|
|
| Top |
|
|
|
|
Posted: Mon Jun 16, 2003 4:36 am |
|
Joined: Fri May 23, 2003 1:47 pm
Posts: 2315
|
conguito wrote: 00 42 00 00 01 40 C1 FD 9E D8 50 00 02 7A 0C 15 .B...@....P..z.. 77 78 90 00 03 45 75 72 6F 44 69 00 04 67 2D 44 wx...EuroDi..g-D 69 73 63 00 05 CC C0 00 00 00 01 00 00 00 00 00 isc............. Some one can add MMORE support,??? remove some media, please... i have expend 250€ in MMORE media's Some one can create a MMORE firmware ??? please I HOPE SO Should work already:
List of added media codes:
6 times space (2x experimental)
6 times space (4x)
BeAll G00001 (2x tested & verified)
CMC MAG.AF01 (4x tested & verified)
DDD DVDR (2x experimental)
EURODIG-DISC (2x experimental)
Please let me know if it doesn't work! (I doubt it won't, because other media with the same 3 lines of media code do work
Last edited by Herrie on Mon Jun 16, 2003 4:41 am, edited 1 time in total.
|
|
| Top |
|
|
|
|
Posted: Mon Jun 16, 2003 4:37 am |
|
Joined: Fri May 23, 2003 1:47 pm
Posts: 2315
|
Humid wrote: Herrie wrote: Humid wrote: dhc014 wrote: DOS is unable to natively write to an NTFS formatted disk. There are drivers that let you read from an NTFS hard drive (though through a different drive letter) in DOS, see pioneerdvd.rpc1.org for one, but you cannot write to the NTFS disk. If you are only flashing the drive, then download >NIL:'s boot disk with the DOS NTFS Read-only drivers and flash that way, but if you are backiing up the current firmware, then you should do it on a blank floppy disk or on a FAT partition. But as Im going to use the Herries-premade-bootcd's with the firmware... Do I need the FAT-partition then? I would need it for backupping, but if someone simply would upload the default 1.05 firmware somewhere - (I live in Finland, dunno which region it is, since Im the über-n00b of the year. ) When you use my bootcd in your normal cd-rom/cd-r/dvd-rom drive then you can just flash your NEC from the bootcd. I just won't work when the bootcd is in the NEC! The backup can be found at Etna's site Since I've only the NEC connected, will it work this way: I'll make a FAT32-partition, boot from the bootCD (which is in the NEC), then change drive to the FAT32-partition (where the flash-hack is), and flash from there? Should work that way since I do it the same way!
|
|
| Top |
|
|
|
|
Posted: Mon Jun 16, 2003 7:23 am |
|
| chef |
| Administrator |
 |
 |
Joined: Fri Aug 09, 2002 11:39 am
Posts: 23429
Location: .de #...still playing LLAMATRON! # sprite killing around level 138 and higher....
|
Herrie wrote: Humid wrote: Herrie wrote: Humid wrote: dhc014 wrote: DOS is unable to natively write to an NTFS formatted disk. There are drivers that let you read from an NTFS hard drive (though through a different drive letter) in DOS, see pioneerdvd.rpc1.org for one, but you cannot write to the NTFS disk. If you are only flashing the drive, then download >NIL:'s boot disk with the DOS NTFS Read-only drivers and flash that way, but if you are backiing up the current firmware, then you should do it on a blank floppy disk or on a FAT partition. But as Im going to use the Herries-premade-bootcd's with the firmware... Do I need the FAT-partition then? I would need it for backupping, but if someone simply would upload the default 1.05 firmware somewhere - (I live in Finland, dunno which region it is, since Im the über-n00b of the year. ) When you use my bootcd in your normal cd-rom/cd-r/dvd-rom drive then you can just flash your NEC from the bootcd. I just won't work when the bootcd is in the NEC! The backup can be found at Etna's site Since I've only the NEC connected, will it work this way: I'll make a FAT32-partition, boot from the bootCD (which is in the NEC), then change drive to the FAT32-partition (where the flash-hack is), and flash from there? Should work that way since I do it the same way! Humid, in your case, boot with the boot-cd/dvd, then copy the needed flashing-files/tools to a accessible hdd-partition, REMOVE the CD/DVD from the NEC, then (maybe make a backup of the current FW before) start flashing your drive.
After that, reboot.
BTW, Finland is almost in good old europe, that means its Regioncode 2.
Tak! (what is it similar in Finish/Finland?)
Over & Out.
If its not working (in) anyway, pm me and I'll try to assist you. 8)
_________________
.:The rpc1.org FAQ:. Please read & follow our firmware request rules precisely! .:The DiscInfo tool:.
I am looking for DVD-R for Authoring DVD-R (A) & HD-DVD media, any size, any brand. Please pm me if you can help. 
|
|
| Top |
|
|
|
|
Posted: Mon Jun 16, 2003 8:16 am |
|
Joined: Fri May 23, 2003 1:47 pm
Posts: 2315
|
mikethegreek wrote: first off Herrie nice one but iam haveing a problem with datawrite red top, they burn ok at 2x and 4x but they dont verifi i have tried a a few now with the same problem:( any help would be grate ps if you need any firmware hosted let me know If you want I could make some 'beta' firmwares you could test Maybe they will work better for you
Just let me know
|
|
| Top |
|
|
|
|
Posted: Mon Jun 16, 2003 8:39 am |
|
| chef |
| Administrator |
|
|
Joined: Fri Aug 09, 2002 11:39 am
Posts: 23429
Location: .de #...still playing LLAMATRON! # sprite killing around level 138 and higher....
|
Just a little note:
I've burned a bunch of Primedisc 4x DVD-R whitetops @4x with Nero (with verify) and had no problems.
Then (I didnt noticed that) stupid windooze just forced downsetting DMA > PIO-mode for unknown reason, but Nero already showed 4x burning... but the timecount showed me the truth... 2x speed of course.
The problem is, all these 4x media burnt at 2x had read-errors and verify-errors in the last 200/300mb of the discs. D@mn.
So, I just removed the IDE-channel in Devicemanager and plugNprayed it again back, set again to FORCING DMA-mode (which was already enabled...) and rebooted.
Started again and now burning again at decided speed (4x) and with NO ERRORS.
_________________
.:The rpc1.org FAQ:. Please read & follow our firmware request rules precisely! .:The DiscInfo tool:.
I am looking for DVD-R for Authoring DVD-R (A) & HD-DVD media, any size, any brand. Please pm me if you can help.
|
|
| Top |
|
|
|
|
Posted: Mon Jun 16, 2003 8:48 am |
|
Joined: Fri May 23, 2003 1:47 pm
Posts: 2315
|
[_chef_] wrote: Just a little note: I've burned a bunch of Primedisc 4x DVD-R whitetops @4x with Nero (with verify) and had no problems. Then (I didnt noticed that) stupid windooze just forced downsetting DMA > PIO-mode for unknown reason, but Nero already showed 4x burning... but the timecount showed me the truth... 2x speed of course. The problem is, all these 4x media burnt at 2x had read-errors and verify-errors in the last 200/300mb of the discs. D@mn. So, I just removed the IDE-channel in Devicemanager and plugNprayed it again back, set again to FORCING DMA-mode (which was already enabled...) and rebooted. Started again and now burning again at decided speed (4x) and with NO ERRORS. Running XP I guess? It seems that XP does this sometime for some reason
I'm running win2k and no problems at all
|
|
| Top |
|
|
|
|
Posted: Mon Jun 16, 2003 8:57 am |
|
Joined: Mon Jun 16, 2003 8:50 am
Posts: 2
|
Hi,
I've tried Princo DVD-RW Ver. 1.1 which are 1-2x speed -RW medias.
The NEC detects them as 1x and at 8 of 10 tries writing fails. If it doesn't fail verify fails. 
00 42 00 00 01 40 D6 FD 9E D8 21 00 02 0F 06 06 .B...@....!.....
88 65 11 00 03 50 52 49 4E 43 4F 00 04 00 00 00 .e...PRINCO.....
00 00 00 00 05 06 88 65 11 00 00 00 06 10 09 06 .......e........
60 15 11 00 07 10 09 06 BC 60 15 00 00 00 00 00 `........`......
Can someone add support for these medias to the firmware, please.
bommelid
|
|
| Top |
|
|
|
|
Posted: Mon Jun 16, 2003 9:06 am |
|
Joined: Sun Jun 15, 2003 9:58 pm
Posts: 4
|
Herrie wrote: If you want I could make some 'beta' firmwares you could test Maybe they will work better for you Just let me know if you could it would be grate
|
|
| Top |
|
|
|
|
Posted: Mon Jun 16, 2003 9:21 am |
|
Joined: Fri May 23, 2003 1:47 pm
Posts: 2315
|
bommelid wrote: Hi, I've tried Princo DVD-RW Ver. 1.1 which are 1-2x speed -RW medias. The NEC detects them as 1x and at 8 of 10 tries writing fails. If it doesn't fail verify fails. 00 42 00 00 01 40 D6 FD 9E D8 21 00 02 0F 06 06 .B...@....!..... 88 65 11 00 03 50 52 49 4E 43 4F 00 04 00 00 00 .e...PRINCO..... 00 00 00 00 05 06 88 65 11 00 00 00 06 10 09 06 .......e........ 60 15 11 00 07 10 09 06 BC 60 15 00 00 00 00 00 `........`...... Can someone add support for these medias to the firmware, please. bommelid These media are supposed to be supported as 2x. Because there's 21 00 in the 1st line which indicates it's 2x. 20 indicates 1x. Unfortunately I wasn't able to find info about the writing speeds for other media then the DVD-R. I'll try to see what I can do, but I suggest you buy some better media, because PRINCO has proven to be pretty crappy!
|
|
| Top |
|
|
|
