|
Portal Board index » .:: Firmware Flashing ::. » DVD-RW/+RW/RAM Firmware
All times are UTC [ DST ]
|
| Author |
Message |
|
|
 Posted: Sun Jun 15, 2003 8:17 pm |
|
Joined: Mon Dec 23, 2002 8:46 am
Posts: 21
|
Herrie wrote: Really curious about your results, because your media has the status of 'experimental'  I can happily say - 100% success - BeALL disc burned beautifully at 2x, without a stutter. I haven't played back the whole image, but it seems to have worked without any issues.
It's official, Herrie - you are the NEC FIRMWARE GOD!
ps. Have you thought about selling your version back to NEC? 
|
|
| Top |
|
 |
|
|
Posted: Sun Jun 15, 2003 8:20 pm |
|
Joined: Sun Jun 15, 2003 6:13 pm
Posts: 3
|
@herrie
you are the real "NEC KING"!
damn i posted my questions just minutes before? don't you have a girlfriend! 
really appreciate your work....i'm on my way changing my fw!
Ghost48
|
|
| Top |
|
|
|
|
Posted: Sun Jun 15, 2003 8:21 pm |
|
Joined: Sun Jun 15, 2003 7:38 pm
Posts: 5
|
Herrie wrote: nise44 wrote: Is it possible to write 1x media in 1x speed? My ND-1300 refuses to write anything slower than 2x and 90% of the discs don't work. Or is it possible to hack the firmware so that it can write in 1x speed? The discs I'm trying to use are these: Code: 00 42 00 00 01 40 C1 FD 9E D8 50 00 02 7A 0D 11 .B...@....P..z..
88 88 70 00 03 4F 50 54 4F 44 49 00 04 53 43 4B ..p..OPTODI..SCK
30 30 31 00 05 88 80 00 00 00 01 00 00 00 00 00 001............. Thanks in advance everybody! 00 42 00 00 01 40 C1 FD 9E D8 50 00 02 7A 0D 11 50 indicates that it's 2x media Officially there isn't no 1x media, because the media code can only be 50 or 52. 50 = 2x, 52 = 4x! OK, thanks. I guess I'll have to find some other media that works better with the drive. Excellent job with the latest firmware btw! 
|
|
| Top |
|
|
|
|
Posted: Sun Jun 15, 2003 8:24 pm |
|
Joined: Sun Jun 15, 2003 8:18 pm
Posts: 7
|
|
i have to say u are the MAN u have to work for NEC(for a lot of money)!!!
I have one question, is there any news about working xbox games with DVD+R burned with the NEC 1300?
thx
chris
|
|
| Top |
|
|
|
|
Posted: Sun Jun 15, 2003 8:34 pm |
|
| Humid |
| Professional Poster |
Joined: Tue Jun 03, 2003 11:25 pm
Posts: 93
|
Noob time, once again... 
Im using W2K, and I tried first to backup the original firmware, running W2K normally with following command line:
nd1300a -sec -mas (since I've my drive @ master) -out original.bin
It started the "ND1100a flashing program", I got few lines of text, credits, copyrights etc - but that was it. It didn't create any new .bin file.
http://tekzero.com/upload/Flashing.jpg
After that I tried booting with F8 (i chose safe mode with command prompt - that looked the most right option) - tried the same - no difference.
After that I tried a risky flashing, without backupping the original (since It didn't want to make the god damn backup.bin), and the result was same.
It did nothing. Help me out here, what I should do? 
|
|
| Top |
|
|
|
|
Posted: Sun Jun 15, 2003 8:39 pm |
|
Joined: Fri May 23, 2003 1:47 pm
Posts: 2315
|
Humid wrote: Noob time, once again... Im using W2K, and I tried first to backup the original firmware, running W2K normally with following command line: nd1300a -sec -mas (since I've my drive @ master) -out original.bin It started the "ND1100a flashing program", I got few lines of text, credits, copyrights etc - but that was it. It didn't create any new .bin file. http://tekzero.com/upload/Flashing.jpgAfter that I tried booting with F8 (i chose safe mode with command prompt - that looked the most right option) - tried the same - no difference. After that I tried a risky flashing, without backupping the original (since It didn't want to make the god damn backup.bin), and the result was same. It did nothing. Help me out here, what I should do? Get a bootdisk from www.bootdisk.com, run the .exe make a diskette and put the firmware on the diskette Then reboot and flash
|
|
| Top |
|
|
|
|
Posted: Sun Jun 15, 2003 8:41 pm |
|
| Humid |
| Professional Poster |
Joined: Tue Jun 03, 2003 11:25 pm
Posts: 93
|
Herrie wrote: Humid wrote: Noob time, once again... Im using W2K, and I tried first to backup the original firmware, running W2K normally with following command line: nd1300a -sec -mas (since I've my drive @ master) -out original.bin It started the "ND1100a flashing program", I got few lines of text, credits, copyrights etc - but that was it. It didn't create any new .bin file. http://tekzero.com/upload/Flashing.jpgAfter that I tried booting with F8 (i chose safe mode with command prompt - that looked the most right option) - tried the same - no difference. After that I tried a risky flashing, without backupping the original (since It didn't want to make the god damn backup.bin), and the result was same. It did nothing. Help me out here, what I should do? Get a bootdisk from www.bootdisk.com, run the .exe make a diskette and put the firmware on the diskette Then reboot and flash Chef told me it could be done with out the disc - since I don't have a floppydrive atm connected. 
So any other option or must I connect the floppy drive? Im out of the god damn [*Profanity*], that was the reason I had to remove it. 
|
|
| Top |
|
|
|
|
Posted: Sun Jun 15, 2003 8:42 pm |
|
Joined: Fri May 23, 2003 1:47 pm
Posts: 2315
|
ghost48 wrote: @herrie you are the real "NEC KING"! damn i posted my questions just minutes before? don't you have a girlfriend! really appreciate your work....i'm on my way changing my fw! Ghost48 I have, but she's living abroad and studying for her final exams now, so I have some spare time I can't stand it when things don't work, so I keep going and going
|
|
| Top |
|
|
|
|
Posted: Sun Jun 15, 2003 8:44 pm |
|
Joined: Fri May 23, 2003 1:47 pm
Posts: 2315
|
Humid wrote: Herrie wrote: Humid wrote: Noob time, once again... Im using W2K, and I tried first to backup the original firmware, running W2K normally with following command line: nd1300a -sec -mas (since I've my drive @ master) -out original.bin It started the "ND1100a flashing program", I got few lines of text, credits, copyrights etc - but that was it. It didn't create any new .bin file. http://tekzero.com/upload/Flashing.jpgAfter that I tried booting with F8 (i chose safe mode with command prompt - that looked the most right option) - tried the same - no difference. After that I tried a risky flashing, without backupping the original (since It didn't want to make the god damn backup.bin), and the result was same. It did nothing. Help me out here, what I should do? Get a bootdisk from www.bootdisk.com, run the .exe make a diskette and put the firmware on the diskette Then reboot and flash Chef told me it could be done with out the disc - since I don't have a floppydrive atm connected. So any other option or must I connect the floppy drive? Im out of the god damn [*Profanity*], that was the reason I had to remove it. I use a bootcd I have a small FAT32 partition with the flash stuff, so I can access it after I booted. If you want I can make an image from my bootcd ? It's about 2mb I guess
|
|
| Top |
|
|
|
|
Posted: Sun Jun 15, 2003 8:44 pm |
|
Joined: Wed May 14, 2003 10:01 pm
Posts: 41
|
chrjs wrote: I have one question, is there any news about working xbox games with DVD+R burned with the NEC 1300?
thx
chris
I've burned a few DVD+Rs with my NEC ND-1300A and they work fine in a xbox with a thompson dvd-drive and a (some of them) in a xbox with a philips dvd-drive. If you have a samsung drive in your xbox, it won't work (at least without changing the booktype from DVD+R to DVD-ROM).
|
|
| Top |
|
|
|
|
Posted: Sun Jun 15, 2003 8:45 pm |
|
| Humid |
| Professional Poster |
Joined: Tue Jun 03, 2003 11:25 pm
Posts: 93
|
Great english from myself, gotta admit. I could be the next Yoda.
|
|
| Top |
|
|
|
|
Posted: Sun Jun 15, 2003 8:48 pm |
|
Joined: Thu Jun 12, 2003 10:36 am
Posts: 21
|
|
00 42 00 00 01 40 C1 FD 9E D8 52 00 02 87 0E 13 .B...@....R.....
66 78 80 00 03 50 52 49 4E 43 4F 00 04 00 00 00 FX...PRINCO.....
00 00 00 00 05 88 80 00 00 00 01 00 06 09 13 11 ................
87 78 80 00 07 88 80 00 00 00 00 00 08 01 1B 0D .X..............
I got to failed attempts at 4x where the burning stalled approximately 50% of the way through. So i tried 2x and burned the disc successfully.
|
|
| Top |
|
|
|
|
Posted: Sun Jun 15, 2003 8:48 pm |
|
| Humid |
| Professional Poster |
Joined: Tue Jun 03, 2003 11:25 pm
Posts: 93
|
Herrie wrote: Humid wrote: Herrie wrote: Humid wrote: Noob time, once again... Im using W2K, and I tried first to backup the original firmware, running W2K normally with following command line: nd1300a -sec -mas (since I've my drive @ master) -out original.bin It started the "ND1100a flashing program", I got few lines of text, credits, copyrights etc - but that was it. It didn't create any new .bin file. http://tekzero.com/upload/Flashing.jpgAfter that I tried booting with F8 (i chose safe mode with command prompt - that looked the most right option) - tried the same - no difference. After that I tried a risky flashing, without backupping the original (since It didn't want to make the god damn backup.bin), and the result was same. It did nothing. Help me out here, what I should do? Get a bootdisk from www.bootdisk.com, run the .exe make a diskette and put the firmware on the diskette Then reboot and flash Chef told me it could be done with out the disc - since I don't have a floppydrive atm connected. So any other option or must I connect the floppy drive? Im out of the god damn [*Profanity*], that was the reason I had to remove it. I use a bootcd I have a small FAT32 partition with the flash stuff, so I can access it after I booted. If you want I can make an image from my bootcd ? It's about 2mb I guess Yeah, please do the image. Most kind of you, though I've all my three HDDs @ NTFS. Flashing isn't possible this way? I've to make a FAT32 partition with the ND1300a.exe + .bin?
|
|
| Top |
|
|
|
|
Posted: Sun Jun 15, 2003 8:49 pm |
|
| Humid |
| Professional Poster |
Joined: Tue Jun 03, 2003 11:25 pm
Posts: 93
|
[_chef_] wrote: Humid wrote that he has no floppydisk drive.
So best seems to DL a bootable diskimage and create a bootable CD-R/W with it and the needed flashfiles. You can do that e.g. with Nero.
Just select bootable CD and select the bootimage and the needed file, then burn and start up with it.
Thanks a lot. Going to try that right away!
...though I'd better get the bootable image first from somewhere.
btw, since I don't have any CD-RW's, but DVD-RWs - can I use those?
Last edited by Humid on Sun Jun 15, 2003 8:52 pm, edited 1 time in total.
|
|
| Top |
|
|
|
|
Posted: Sun Jun 15, 2003 8:51 pm |
|
Joined: Sun Jun 15, 2003 8:34 pm
Posts: 2
Location: Copenhagen
|
|
@Herrie your flash tool is simple perfect, got many media working now - simply perfect, however there's one brand that still wont work; Mmore.
00 42 00 00 01 40 C1 FD 9E D8 50 00 02 7A 0C 15 .B...@....P..Z..
77 78 90 00 03 49 4E 46 4F 44 20 00 04 4B 2D 52 WX...INFOD ..K-R
30 31 00 00 05 CC C0 00 00 00 01 00 00 00 00 00 01..............
is there a theoretical chance of adding this media-type to the firmware, just bought 50ps of them - feel kinda stupid that I did not check with one, before buying that many.... well, well..
-------------------------------------------------------------------------------
btw, this medie, DiscPower WORKS @ 2x with original and hacked firm
00 42 00 00 01 40 C1 FD 9E D8 50 00 02 58 0E 11 .B...@....P..X..
98 99 80 00 03 4D 58 4C 20 52 47 00 04 30 31 00 .....MXL RG..01.
00 00 00 00 05 88 80 00 00 00 01 00 00 00 00 00 ................
-------------------------------------------------------------------------------
Last edited by three_dee on Sun Jun 15, 2003 9:05 pm, edited 1 time in total.
|
|
| Top |
|
|
|
|
Posted: Sun Jun 15, 2003 9:04 pm |
|
Joined: Fri May 23, 2003 1:47 pm
Posts: 2315
|
three_dee wrote: @Herrie your flash tool is simple perfect, got many media working now - simply perfect, however there's one brand that still wont work; Mmore.
00 42 00 00 01 40 C1 FD 9E D8 50 00 02 7A 0C 15 .B...@....P..Z..
77 78 90 00 03 49 4E 46 4F 44 20 00 04 4B 2D 52 WX...INFOD ..K-R
30 31 00 00 05 CC C0 00 00 00 01 00 00 00 00 00 01..............
is there a theoretical chance of adding this media-type to the firmware, just bought 50ps of them - feel kinda stupid that I did not check with one, before buying that many.... well, well..
Try http://212.203.28.251/105three.rar
I accidentally forgot to add it Please post your results!
|
|
| Top |
|
|
|
|
Posted: Sun Jun 15, 2003 9:05 pm |
|
Joined: Fri May 23, 2003 1:47 pm
Posts: 2315
|
Humid wrote: [_chef_] wrote: Humid wrote that he has no floppydisk drive.
So best seems to DL a bootable diskimage and create a bootable CD-R/W with it and the needed flashfiles. You can do that e.g. with Nero.
Just select bootable CD and select the bootimage and the needed file, then burn and start up with it. Thanks a lot. Going to try that right away! ...though I'd better get the bootable image first from somewhere. btw, since I don't have any CD-RW's, but DVD-RWs - can I use those? I splitted my partition with Partition Magic 8 (just made an FAT32 HD of 50 MB:))
You can download my bootcd over here:
http://212.203.28.251/bootcd.rar
|
|
| Top |
|
|
|
|
Posted: Sun Jun 15, 2003 9:06 pm |
|
| chef |
| Administrator |
 |
 |
Joined: Fri Aug 09, 2002 11:39 am
Posts: 23434
Location: .de #...still playing LLAMATRON! # sprite killing around level 138 and higher....
|
Humid wrote: [_chef_] wrote: Humid wrote that he has no floppydisk drive.
So best seems to DL a bootable diskimage and create a bootable CD-R/W with it and the needed flashfiles. You can do that e.g. with Nero.
Just select bootable CD and select the bootimage and the needed file, then burn and start up with it. Thanks a lot. Going to try that right away! ...though I'd better get the bootable image first from somewhere. btw, since I don't have any CD-RW's, but DVD-RWs - can I use those? Why not?
Just select DVD-ROM (Boot) instead and then do the same steps like with CD-R/W.
_________________
.:The rpc1.org FAQ:. Please read & follow our firmware request rules precisely! .:The DiscInfo tool:.
I am looking for DVD-R for Authoring DVD-R (A) & HD-DVD media, any size, any brand. Please pm me if you can help. 
|
|
| Top |
|
|
|
|
Posted: Sun Jun 15, 2003 9:20 pm |
|
Joined: Fri May 23, 2003 1:47 pm
Posts: 2315
|
three_dee wrote: -------------------------------------------------------------------------------
btw, this medie, DiscPower WORKS @ 2x with original and hacked firm
00 42 00 00 01 40 C1 FD 9E D8 50 00 02 58 0E 11 .B...@....P..X..
98 99 80 00 03 4D 58 4C 20 52 47 00 04 30 31 00 .....MXL RG..01.
00 00 00 00 05 88 80 00 00 00 01 00 00 00 00 00 ................
-------------------------------------------------------------------------------
It's supposed to work @ 2x
|
|
| Top |
|
|
|
|
Posted: Sun Jun 15, 2003 9:35 pm |
|
Joined: Sun Jun 15, 2003 8:34 pm
Posts: 2
Location: Copenhagen
|
Herrie wrote: three_dee wrote: -------------------------------------------------------------------------------
btw, this medie, DiscPower WORKS @ 2x with original and hacked firm
00 42 00 00 01 40 C1 FD 9E D8 50 00 02 58 0E 11 .B...@....P..X..
98 99 80 00 03 4D 58 4C 20 52 47 00 04 30 31 00 .....MXL RG..01.
00 00 00 00 05 88 80 00 00 00 01 00 00 00 00 00 ................
------------------------------------------------------------------------------- It's supposed to work @ 2x hehe - I know, it's just that on page six you wrote something like "plz post codes of working media" and I did not find the DiscPower media posted, so I thoug I'd do it
AND the firmware you made especially for me, is working like a charm - I cannot thank you enough. The Mmore discs burn flawlessly at 2x.
|
|
| Top |
|
|
|
|
Posted: Sun Jun 15, 2003 9:46 pm |
|
Joined: Fri Jun 13, 2003 8:39 pm
Posts: 5
Location: Denmark
|
|
Hello Herrie
Great job....
I have a problem I can now burn Princo 4 x, but when it comes around 99 % It makes an error ( Nero) It worked fine with 2x
I hoPe you can help mE!!!!!
The GREAT dANE
_________________
John K
|
|
| Top |
|
|
|
|
Posted: Sun Jun 15, 2003 9:48 pm |
|
Joined: Sun Jun 15, 2003 9:39 pm
Posts: 2
|
Herrie wrote: three_dee wrote: @Herrie your flash tool is simple perfect, got many media working now - simply perfect, however there's one brand that still wont work; Mmore.
00 42 00 00 01 40 C1 FD 9E D8 50 00 02 7A 0C 15 .B...@....P..Z..
77 78 90 00 03 49 4E 46 4F 44 20 00 04 4B 2D 52 WX...INFOD ..K-R
30 31 00 00 05 CC C0 00 00 00 01 00 00 00 00 00 01..............
is there a theoretical chance of adding this media-type to the firmware, just bought 50ps of them - feel kinda stupid that I did not check with one, before buying that many.... well, well.. Try http://212.203.28.251/105three.rar I accidentally forgot to add it Please post your results! Hay Herrie I also want to thank you for a very very good job.
Q left is the Mmore already in the "free" and "auto" version you put on your site ?
|
|
| Top |
|
|
|
|
Posted: Sun Jun 15, 2003 9:51 pm |
|
Joined: Fri May 23, 2003 1:47 pm
Posts: 2315
|
datakrom wrote: Herrie wrote: three_dee wrote: @Herrie your flash tool is simple perfect, got many media working now - simply perfect, however there's one brand that still wont work; Mmore.
00 42 00 00 01 40 C1 FD 9E D8 50 00 02 7A 0C 15 .B...@....P..Z..
77 78 90 00 03 49 4E 46 4F 44 20 00 04 4B 2D 52 WX...INFOD ..K-R
30 31 00 00 05 CC C0 00 00 00 01 00 00 00 00 00 01..............
is there a theoretical chance of adding this media-type to the firmware, just bought 50ps of them - feel kinda stupid that I did not check with one, before buying that many.... well, well.. Try http://212.203.28.251/105three.rar I accidentally forgot to add it Please post your results! Hay Herrie I also want to thank you for a very very good job. Q left is the Mmore already in the "free" and "auto" version you put on your site ? Not yet, busy updating the files now
|
|
| Top |
|
|
|
|
Posted: Sun Jun 15, 2003 9:55 pm |
|
Joined: Wed May 14, 2003 4:29 pm
Posts: 12
Location: Sweden
|
Herrie! I love you!
Btw, you really should begin to put version numbers on your hacked firmware's so we know which one to get.
ex. 105.hacked.ver.1.3.zip
105.hacked.ver.1.3.rpc2.autoreset.zip
105.hacked.ver.1.3.rpc1.zip
And maybe a .txt with a history?
Keep up the good work!
|
|
| Top |
|
|
|
