Use this one:
http://files.rpc1.org/index.php?act=download&id=5141Most of the CD/DVD drives for laptops that are sold retail are on cable select mode as default.
Toshiba Laptops, as others, use the secondary IDE Channel on master for their optical drives, so the solution is to change the setting from Cable Select to master.
Please find the latest inverse CSEL firmware foryour drive below.
The drive needs to be recognised by the BIOS in order to flash the firmware.
If you do not have a notebook which does, you can alternatively use an IDE-adapter to connect the drive to a Desktop PC.
Instructions:
- Make bootable startup disk. *
- Extract / copy all files in the ZIP file onto the startup disk
- Reboot your PC with the startup disk inserted.
- Type 'update.bat'
F/W will now be updated (you may be prompted to insert a disk, any CD will do)
- Wait for flashing to finish.
- Reboot PC
* For instructions how to create a startup disk, see the following Microsoft Knowledge Base article:
Windows 95, 98, 98SE and Windows Millennium:
How to Create a Windows 98 Startup Disk
http://support.microsoft.com/?id=296532 Windows XP
Create a MS-DOS-Startup Disk
http://support.microsoft.com/?id=843478 On a Windows 2000 system you need to use a startup disk from the operationg systems above.
[Disclaimer]
Toshiba will not accept responsibility for any damages incurred due to use of this software.
This software is provided 'as is' and should be used by technically experienced persons only.
You are not entitled to modify, publish, copy or sell the software in any way.
The information I have provided should help you. If you have any other questions or need further assistance, please reply to this email.
