The Firmware Page

I have a LITE-ON Slimtype COMBO LSC24082K drive on an EMachines M2105 laptop. I checked your list of available firmware, and you have one available for LSC24082K(X). Is this the same as the one on my laptop. And if so, I'll need some help with the flashing.
Thank you.
Mark

post a discinfo output from your drive

I've pasted results from DISCInfo program. When I try to burn a CD, an error message says to insert a blank CD.
Thank you for your help!




DISCINFO VERSION : 1.6.1.6
VENDOR : Slimtype
MODEL : COMBO LSC-24082K
REVISION : JBK2
VENDOR SPECIFIC : Jul25 ,2003
LOADING MECHANISM : Tray
NUMBER VOL. LEVELS : 255
BUFFER SIZE : 2048KB
INTERFACE : ATAPI
RPC2 SCHEME : YES
STATUS : Set
USER CHANGES : 4
VENDOR CHANGES : 4
CURRENT REGION : 1
ANALOG AUDIO PLAY : YES
COMPOSITE OUTPUT : YES
DIGITAL PORT-PORT1 : NO
DIGITAL PORT-PORT2 : NO
READ UPC CODE : YES
MULTISESSION READ : YES
MODE 2 FORM 1 : YES
MODE 2 FORM 2 : YES
READ ISRC CODE : YES
READ BAD CODE : NO
BUFFER UNDER-RUN : YES
MT. RAINIER : YES
CAN READ CDR : YES
CAN READ CDRW : YES
CAN READ CDRM2 : YES
CAN WRITE CDR : YES
CAN WRITE CDRW : YES
CAN TEST WRITE : YES
CAN READ DVD-ROM : YES
CAN READ DVD-R : YES
CAN READ DVD-RW : YES
CAN READ DVD-RAM : NO
CAN READ DVD+R : YES
CAN READ DVD+RW : YES
CAN WRITE DVD-R : NO
CAN WRITE DVD-RW : NO
CAN WRITE DVD-RAM : NO
CAN WRITE DVD+R : NO
CAN WRITE DVD+RW : NO
MAX CDR READ SPEED : 24
MAX CDR WRITE SPEED: 24

try cleaning it, it doesn't sound like a firmware issue, also try in safemode, can you boot from a cd, like an installation disc?

Thank you very much. Sorry to take up your time.
Mark