Need Help: DVD+/-DLRWL16 D2-15 (3202-3292)

DVDaniel · **Joined:** Sat Jan 23, 2010 10:19 pm **Posts:** 3

I have a Memorex:

Model: DVD+/-DLRWL16 D2-15
Part Number: 3202-3292
Manufactured Date: March 2005

I did a search and found these links:

viewtopic.php?f=12&t=38739&hilit=3202+3292 (Different model number, but same part number).

http://liggydee.cdfreaks.com/page/en/NEC-ND-3520A/ (Link found in the above topic).

http://www.memorex.com/archives/discont ... .php?p=872 (Link to firmware on Memorex.com).

My model number isn't listed on the Memorex firmware page, but the part number is, and even if it was listed, the various firmware versions there are around four years old.

So, my questions is what firmware and flash tool do I need, and where can I get them? I want to make sure I use the right ones.

DiscInfo CD/DVD Summary wrote:

DISCINFO VERSION : 1.7.0 BETA.12
VENDOR : LQZKDCT
MODEL : PMR0LQNW5A
REVISION : 1.03
LOADING MECHANISM : Tray
NUMBER VOL. LEVELS : 256
BUFFER SIZE : 128KB
INTERFACE : ATAPI
RPC2 SCHEME : YES
STATUS : Not Set
USER CHANGES : 5
VENDOR CHANGES : 4
CURRENT REGION : Not Set
ANALOG AUDIO PLAY : YES
COMPOSITE OUTPUT : YES
DIGITAL PORT-PORT1 : NO
DIGITAL PORT-PORT2 : NO
READ UPC CODE : YES
MULTISESSION READ : YES
MODE 2 FORM 1 : YES
MODE 2 FORM 2 : YES
READ ISRC CODE : YES
READ BAD CODE : NO
BUFFER UNDER-RUN : NO
MT. RAINIER : NO
CAN READ CDR : YES
CAN READ CDRW : YES
CAN READ CDRM2 : YES
CAN WRITE CDR : NO
CAN WRITE CDRW : NO
CAN TEST WRITE : NO
CAN READ DVD-ROM : YES
CAN READ DVD-R : YES
CAN READ DVD-RW : YES
CAN READ DVD-RAM : NO
CAN READ DVD+R : YES
CAN READ DVD+RW : YES
CAN WRITE DVD-R : NO
CAN WRITE DVD-RW : NO
CAN WRITE DVD-RAM : NO
CAN WRITE DVD+R : NO
CAN WRITE DVD+RW : NO
MAX CDR READ SPEED : 48

chef · **Posted:** Sun Jan 24, 2010 11:23 am

Why do you think your would need a firmware & flasher for your drive?

Does it not work??

If you want to crossflash then just follow the links you already posted, you will find all things there.

DVDaniel · **Joined:** Sat Jan 23, 2010 10:19 pm **Posts:** 3

[_chef_] wrote:

Why do you think your would need a firmware & flasher for your drive?

I'm getting power calibration errors, and the drive cannot read some DVDs, but they work in other computers. It's probably caused by dust, but I want to try upgrading the firmware before taking the drive apart and cleaning the laser.

[_chef_] wrote:

Does it not work??

The drive does not work. I haven't flashed it yet. I wanted to make sure I chose the right firmware.

[_chef_] wrote:

If you want to crossflash then just follow the links you already posted, you will find all things there.

I'm not sure which one to choose. I thought since mine had a different model number but the same part number, I would need to use a different one.

chef · **Posted:** Sun Jan 24, 2010 3:25 pm

You give confusing answers, first you say it has reading problems and then it does not work.
It can be only the one or the other.Either a drive does not work or does, even if it hs issues.

Follow the links you linked to and follow Liggy's advice please.
Create a firmware backup first (using binflash) and disable the other optical drive!!!

DVDaniel · **Joined:** Sat Jan 23, 2010 10:19 pm **Posts:** 3

[_chef_] wrote:

You give confusing answers, first you say it has reading problems and then it does not work. It can be only the one or the other.Either a drive does not work or does, even if it has issues.

It reads some discs.
It won't burn any.

[_chef_] wrote:

Follow the links you linked to and follow Liggy's advice please.
Create a firmware backup first (using binflash) and disable the other optical drive!!!

Ok.

chef · **Posted:** Sun Jan 24, 2010 7:27 pm

You get Power calibration errors because of unsuitable media used.

The Firmware Page

Need Help: DVD+/-DLRWL16 D2-15 (3202-3292)

Who is online