The Firmware Page

Hello all:

I am looking for codefree firmware for my Samsung TS-H653Q and my LG GP08LU11. Can anyone help me here?

The LG is an external drive, the one from Samsung has been delivered with an HP computer (no firmware available at the HP website). I have seen the recommendation for the Samsung drive to use firmware from SH-S223F. Not sure if that is a good idea as the SH-S223F does not support Lightscribe (AFAIK), but my TS-H653Q does!

Thanks very much in advance!!!


Here is the output from disc info:

---------------------------------------------------------
------------------- LG ----------------------------------
---------------------------------------------------------
DISCINFO VERSION : 1.6.1.6
VENDOR : HL-DT-ST
MODEL : DVDRAM GP08LU11
REVISION : KV01
VENDOR SPECIFIC : 
LOADING MECHANISM : Tray
NUMBER VOL. LEVELS : 256
BUFFER SIZE : 2048KB
INTERFACE : ATAPI
RPC2 SCHEME : YES
STATUS : Not Set
USER CHANGES : 5
VENDOR CHANGES : 4
CURRENT REGION : Not set
ANALOG AUDIO PLAY : YES
COMPOSITE OUTPUT : NO
DIGITAL PORT-PORT1 : NO
DIGITAL PORT-PORT2 : NO
READ UPC CODE : YES
MULTISESSION READ : YES
MODE 2 FORM 1 : YES
MODE 2 FORM 2 : YES
READ ISRC CODE : YES
READ BAD CODE : NO
BUFFER UNDER-RUN : YES
MT. RAINIER : NO
CAN READ CDR : YES
CAN READ CDRW : YES
CAN READ CDRM2 : YES
CAN WRITE CDR : YES
CAN WRITE CDRW : YES
CAN TEST WRITE : YES
CAN READ DVD-ROM : YES
CAN READ DVD-R : YES
CAN READ DVD-RW : YES
CAN READ DVD-RAM : YES
CAN READ DVD+R : YES
CAN READ DVD+RW : YES
CAN WRITE DVD-R : YES
CAN WRITE DVD-RW : YES
CAN WRITE DVD-RAM : YES
CAN WRITE DVD+R : YES
CAN WRITE DVD+RW : YES
MAX CDR READ SPEED : 24
MAX CDR WRITE SPEED: 24

---------------------------------------------------------
------------------- SAMSUNG ---------------------------
---------------------------------------------------------
DISCINFO VERSION : 1.6.1.6
VENDOR : TSSTcorp
MODEL : CDDVDW TS-H653Q
REVISION : 0303
VENDOR SPECIFIC : 0506
LOADING MECHANISM : Tray
NUMBER VOL. LEVELS : 256
BUFFER SIZE : 2048KB
TOSHIBA CODE : OEM HP
TOSHIBA MODEL :
INTERFACE : ATAPI
RPC2 SCHEME : YES
STATUS : Not Set
USER CHANGES : 5
VENDOR CHANGES : 4
CURRENT REGION : Not set
ANALOG AUDIO PLAY : YES
COMPOSITE OUTPUT : NO
DIGITAL PORT-PORT1 : NO
DIGITAL PORT-PORT2 : NO
READ UPC CODE : YES
MULTISESSION READ : YES
MODE 2 FORM 1 : YES
MODE 2 FORM 2 : YES
READ ISRC CODE : YES
READ BAD CODE : NO
BUFFER UNDER-RUN : YES
MT. RAINIER : NO
CAN READ CDR : YES
CAN READ CDRW : YES
CAN READ CDRM2 : YES
CAN WRITE CDR : YES
CAN WRITE CDRW : YES
CAN TEST WRITE : YES
CAN READ DVD-ROM : YES
CAN READ DVD-R : YES
CAN READ DVD-RW : YES
CAN READ DVD-RAM : YES
CAN READ DVD+R : YES
CAN READ DVD+RW : YES
CAN WRITE DVD-R : YES
CAN WRITE DVD-RW : YES
CAN WRITE DVD-RAM : YES
CAN WRITE DVD+R : YES
CAN WRITE DVD+RW : YES
MAX CDR READ SPEED : 40
MAX CDR WRITE SPEED: 40

Hello,

where is my mistake that I don't get a single reply as only one here!? Help, very willing to give additional information.

Thanks a lot!

how you going to patch them without any firmware? if there is none. you cannot