|
Portal Board index » .:: Firmware Flashing ::. » Request firmware
All times are UTC [ DST ]
|
 
|
Page 1 of 1
|
[ 25 posts ] |
|
| Author |
Message |
|
|
 Posted: Sat Oct 30, 2010 9:38 pm |
|
Joined: Tue Sep 11, 2007 8:18 pm
Posts: 5
|
hi there, a patched firmware to get this little fella region free would be awesome... sadly i can't provide any discinfo outputs, because non of the versions i found could be started under win7 ultimate x64  the current firmware can be found here: http://files.rpc1.org/index.php?act=view&id=5813
|
|
| Top |
|
 |
|
|
Posted: Sun Oct 31, 2010 1:20 am |
|
| devilsclaw |
| Moderator |
 |
 |
Joined: Sat Jan 12, 2002 6:08 am
Posts: 331
|
|
1. right click the discinfo exe.
2. properties
3. go to tab at the top called Compatibility
4. Check Run this program in compatibility mode
5. Select Windows XP (Service Pack 2)
6. Click ok
7. run discinfo and provide info here
|
|
| Top |
|
|
|
|
Posted: Sun Oct 31, 2010 4:53 am |
|
Joined: Tue Sep 11, 2007 8:18 pm
Posts: 5
|
|
yeah, i had already tried that... sorry, still doesn't work o_O
i've tried both the 1.6 and 1.7 version... always "EAccessViolations" and "unable to populate device list" ect. error messages...
|
|
| Top |
|
|
|
|
Posted: Sun Oct 31, 2010 5:06 am |
|
| devilsclaw |
| Moderator |
|
|
Joined: Sat Jan 12, 2002 6:08 am
Posts: 331
|
|
Well, I'm running Windows 7 64bit on my desktop and Windows 7 32bit on my laptop and it has worked on both and I have had other people do the same recently, So either you don't have perms to run it which would mean you would not have perms to flash your drive, your drive is not detected by your os, or your doing it wrong.
|
|
| Top |
|
|
|
|
Posted: Sun Oct 31, 2010 4:07 pm |
|
Joined: Tue Sep 11, 2007 8:18 pm
Posts: 5
|
haha, yeah that tip did it... silly me, could've thought about that earlier... in bios i had set the sata-controller type to ahci... after i changed it back to ide.... lo' and behold: diskinfo worked  )) here is the info: DISCINFO VERSION : 1.7.0 BETA.12 VENDOR : TSSTcorp MODEL : DVDWBD SH-B123L REVISION : SB02 LOADING MECHANISM : Tray NUMBER VOL. LEVELS : 256 BUFFER SIZE : 2048KB TOSHIBA CODE : OEM SB TOSHIBA MODEL : INTERFACE : ATAPI RPC2 SCHEME : YES STATUS : Not Set USER CHANGES : 5 VENDOR CHANGES : 4 CURRENT REGION : Not Set ANALOG AUDIO PLAY : YES COMPOSITE OUTPUT : NO DIGITAL PORT-PORT1 : NO DIGITAL PORT-PORT2 : NO READ UPC CODE : YES MULTISESSION READ : YES MODE 2 FORM 1 : YES MODE 2 FORM 2 : YES READ ISRC CODE : YES READ BAD CODE : NO BUFFER UNDER-RUN : YES MT. RAINIER : NO CAN READ CDR : YES CAN READ CDRW : YES CAN READ CDRM2 : YES CAN WRITE CDR : YES CAN WRITE CDRW : YES CAN TEST WRITE : YES CAN READ DVD-ROM : YES CAN READ DVD-R : YES CAN READ DVD-RW : YES CAN READ DVD-RAM : YES CAN READ DVD+R : YES CAN READ DVD+RW : YES CAN WRITE DVD-R : YES CAN WRITE DVD-RW : YES CAN WRITE DVD-RAM : YES CAN WRITE DVD+R : YES CAN WRITE DVD+RW : YES MAX CDR READ SPEED : 48 MAX CDR WRITE SPEED: 48
|
|
| Top |
|
|
|
|
Posted: Sun Nov 07, 2010 10:02 am |
|
Joined: Sun Nov 07, 2010 9:56 am
Posts: 1
|
|
Thanks for an awesome site. I'd like to second this request.
My DiskInfo is almost the same, but for whatever reason the MAX CDR READ SPEED is different. I am using the Intel Rapid Storage Technology driver.
DISCINFO VERSION : 1.7.0 BETA.12
VENDOR : TSSTcorp
MODEL : DVDWBD SH-B123L
REVISION : SB02
LOADING MECHANISM : Tray
NUMBER VOL. LEVELS : 256
BUFFER SIZE : 2048KB
TOSHIBA CODE : OEM SB
TOSHIBA MODEL :
INTERFACE : ATAPI
RPC2 SCHEME : YES
STATUS : Not Set
USER CHANGES : 5
VENDOR CHANGES : 4
CURRENT REGION : Not Set
ANALOG AUDIO PLAY : YES
COMPOSITE OUTPUT : NO
DIGITAL PORT-PORT1 : NO
DIGITAL PORT-PORT2 : NO
READ UPC CODE : YES
MULTISESSION READ : YES
MODE 2 FORM 1 : YES
MODE 2 FORM 2 : YES
READ ISRC CODE : YES
READ BAD CODE : NO
BUFFER UNDER-RUN : YES
MT. RAINIER : NO
CAN READ CDR : YES
CAN READ CDRW : YES
CAN READ CDRM2 : YES
CAN WRITE CDR : YES
CAN WRITE CDRW : YES
CAN TEST WRITE : YES
CAN READ DVD-ROM : YES
CAN READ DVD-R : YES
CAN READ DVD-RW : YES
CAN READ DVD-RAM : YES
CAN READ DVD+R : YES
CAN READ DVD+RW : YES
CAN WRITE DVD-R : YES
CAN WRITE DVD-RW : YES
CAN WRITE DVD-RAM : YES
CAN WRITE DVD+R : YES
CAN WRITE DVD+RW : YES
MAX CDR READ SPEED : 19
Please let me know if I can provide any more information, or help test anything.
Hope this helps! And thanks again for this fantastic resource...
|
|
| Top |
|
|
|
|
Posted: Thu Dec 30, 2010 3:06 pm |
|
Joined: Thu Dec 30, 2010 2:40 pm
Posts: 1
|
|
Hello,
Would like to third this request... here's my discinfo below.
Also, there's a new firmware version SB03, I can upload this somewhere if required...
Thank you!
Mike
DISCINFO VERSION : 1.6.1.6
VENDOR : TSSTcorp
MODEL : DVDWBD SH-B123L
REVISION : SB03
VENDOR SPECIFIC : 1203
LOADING MECHANISM : Tray
SERIAL NUMBER : x
NUMBER VOL. LEVELS : 256
BUFFER SIZE : 2048KB
TOSHIBA CODE : OEM SB
TOSHIBA MODEL :
INTERFACE : ATAPI
RPC2 SCHEME : YES
STATUS : Set
USER CHANGES : 4
VENDOR CHANGES : 4
CURRENT REGION : 2
ANALOG AUDIO PLAY : YES
COMPOSITE OUTPUT : NO
DIGITAL PORT-PORT1 : NO
DIGITAL PORT-PORT2 : NO
READ UPC CODE : YES
MULTISESSION READ : YES
MODE 2 FORM 1 : YES
MODE 2 FORM 2 : YES
READ ISRC CODE : YES
READ BAD CODE : NO
BUFFER UNDER-RUN : YES
MT. RAINIER : NO
CAN READ CDR : YES
CAN READ CDRW : YES
CAN READ CDRM2 : YES
CAN WRITE CDR : YES
CAN WRITE CDRW : YES
CAN TEST WRITE : YES
CAN READ DVD-ROM : YES
CAN READ DVD-R : YES
CAN READ DVD-RW : YES
CAN READ DVD-RAM : YES
CAN READ DVD+R : YES
CAN READ DVD+RW : YES
CAN WRITE DVD-R : YES
CAN WRITE DVD-RW : YES
CAN WRITE DVD-RAM : YES
CAN WRITE DVD+R : YES
CAN WRITE DVD+RW : YES
MAX CDR READ SPEED : 48
MAX CDR WRITE SPEED: 48
|
|
| Top |
|
|
|
|
Posted: Sun Mar 27, 2011 6:32 pm |
|
Joined: Thu Feb 19, 2004 12:30 am
Posts: 9
|
|
Has this drive been rip unlocked yet?
|
|
| Top |
|
|
|
|
Posted: Mon Mar 28, 2011 7:51 am |
|
| chef |
| Administrator |
 |
 |
Joined: Fri Aug 09, 2002 11:39 am
Posts: 23434
Location: .de #...still playing LLAMATRON! # sprite killing around level 138 and higher....
|
pras1011 wrote: Has this drive been rip unlocked yet? Where is the riplock? Where is the proof for an riplock??
_________________
.:The rpc1.org FAQ:. Please read & follow our firmware request rules precisely! .:The DiscInfo tool:.
I am looking for DVD-R for Authoring DVD-R (A) & HD-DVD media, any size, any brand. Please pm me if you can help. 
|
|
| Top |
|
|
|
|
Posted: Mon Mar 28, 2011 6:55 pm |
|
Joined: Thu Feb 19, 2004 12:30 am
Posts: 9
|
|
I was just asking if there was one. Calm down!!
|
|
| Top |
|
|
|
|
Posted: Tue Mar 29, 2011 6:46 am |
|
| chef |
| Administrator |
|
|
Joined: Fri Aug 09, 2002 11:39 am
Posts: 23434
Location: .de #...still playing LLAMATRON! # sprite killing around level 138 and higher....
|
pras1011 wrote: I was just asking if there was one. Calm down!! I think you should calm down. You still failed to prove that there is even a riplock...
_________________
.:The rpc1.org FAQ:. Please read & follow our firmware request rules precisely! .:The DiscInfo tool:.
I am looking for DVD-R for Authoring DVD-R (A) & HD-DVD media, any size, any brand. Please pm me if you can help.
|
|
| Top |
|
|
|
|
Posted: Thu Mar 31, 2011 4:25 pm |
|
Joined: Thu Feb 19, 2004 12:30 am
Posts: 9
|
|
You are a idiot. I was only asking if there was one.
|
|
| Top |
|
|
|
|
Posted: Fri Apr 01, 2011 6:55 am |
|
| chef |
| Administrator |
|
|
Joined: Fri Aug 09, 2002 11:39 am
Posts: 23434
Location: .de #...still playing LLAMATRON! # sprite killing around level 138 and higher....
|
pras1011 wrote: You are a idiot. I was only asking if there was one. And you are banned now, smart aleck.
_________________
.:The rpc1.org FAQ:. Please read & follow our firmware request rules precisely! .:The DiscInfo tool:.
I am looking for DVD-R for Authoring DVD-R (A) & HD-DVD media, any size, any brand. Please pm me if you can help.
|
|
| Top |
|
|
|
|
Posted: Thu May 26, 2011 8:34 pm |
|
Joined: Thu May 26, 2011 8:11 pm
Posts: 1
|
|
Hi!
I have a Samsung SH-B123L that I'm trying to get region free. It has firmware version SB04
Any way to get the drive RPC1?
Please find the DiscInfo of the drive below
DISCINFO VERSION : 1.6.1.6
VENDOR : TSSTcorp
MODEL : DVDWBD SH-B123L
REVISION : SB04
VENDOR SPECIFIC : 0331
LOADING MECHANISM : Tray
SERIAL NUMBER :
NUMBER VOL. LEVELS : 256
BUFFER SIZE : 2048KB
TOSHIBA CODE : OEM SB
TOSHIBA MODEL :
INTERFACE : ATAPI
RPC2 SCHEME : YES
STATUS : Set
USER CHANGES : 4
VENDOR CHANGES : 4
CURRENT REGION : 4
ANALOG AUDIO PLAY : YES
COMPOSITE OUTPUT : NO
DIGITAL PORT-PORT1 : NO
DIGITAL PORT-PORT2 : NO
READ UPC CODE : YES
MULTISESSION READ : YES
MODE 2 FORM 1 : YES
MODE 2 FORM 2 : YES
READ ISRC CODE : YES
READ BAD CODE : NO
BUFFER UNDER-RUN : YES
MT. RAINIER : NO
CAN READ CDR : YES
CAN READ CDRW : YES
CAN READ CDRM2 : YES
CAN WRITE CDR : YES
CAN WRITE CDRW : YES
CAN TEST WRITE : YES
CAN READ DVD-ROM : YES
CAN READ DVD-R : YES
CAN READ DVD-RW : YES
CAN READ DVD-RAM : YES
CAN READ DVD+R : YES
CAN READ DVD+RW : YES
CAN WRITE DVD-R : YES
CAN WRITE DVD-RW : YES
CAN WRITE DVD-RAM : YES
CAN WRITE DVD+R : YES
CAN WRITE DVD+RW : YES
MAX CDR READ SPEED : 48
|
|
| Top |
|
|
|
|
Posted: Sat Oct 08, 2011 10:19 pm |
|
Joined: Sat Oct 08, 2011 10:14 pm
Posts: 1
|
|
What constitutes proof of a riplock? I'm seeing ~6x for BD and ~4x for DVD when ripping from this drive, as opposed to the advertised 12x and 16x.
Would be great to get an unlock for this drive. Here's my DiscInfo:
DISCINFO VERSION : 1.6.1.6
VENDOR : TSSTcorp
MODEL : DVDWBD SH-B123L
REVISION : SB04
VENDOR SPECIFIC : 0331
LOADING MECHANISM : Tray
SERIAL NUMBER :
NUMBER VOL. LEVELS : 256
BUFFER SIZE : 2048KB
TOSHIBA CODE : OEM SB
TOSHIBA MODEL :
INTERFACE : ATAPI
RPC2 SCHEME : YES
STATUS : Set
USER CHANGES : 4
VENDOR CHANGES : 4
CURRENT REGION : 1
ANALOG AUDIO PLAY : YES
COMPOSITE OUTPUT : NO
DIGITAL PORT-PORT1 : NO
DIGITAL PORT-PORT2 : NO
READ UPC CODE : YES
MULTISESSION READ : YES
MODE 2 FORM 1 : YES
MODE 2 FORM 2 : YES
READ ISRC CODE : YES
READ BAD CODE : NO
BUFFER UNDER-RUN : YES
MT. RAINIER : NO
CAN READ CDR : YES
CAN READ CDRW : YES
CAN READ CDRM2 : YES
CAN WRITE CDR : YES
CAN WRITE CDRW : YES
CAN TEST WRITE : YES
CAN READ DVD-ROM : YES
CAN READ DVD-R : YES
CAN READ DVD-RW : YES
CAN READ DVD-RAM : YES
CAN READ DVD+R : YES
CAN READ DVD+RW : YES
CAN WRITE DVD-R : YES
CAN WRITE DVD-RW : YES
CAN WRITE DVD-RAM : YES
CAN WRITE DVD+R : YES
CAN WRITE DVD+RW : YES
MAX CDR READ SPEED : 94
|
|
| Top |
|
|
|
|
Posted: Mon Nov 14, 2011 11:44 am |
|
Joined: Mon Nov 14, 2011 11:30 am
Posts: 1
|
Hello, I'n new here, I was wondering if there was any joy with RCP-1 for this drive I am on firmware SB04 http://www.techspot.com/drivers/driver/ ... ion/15210/DISCINFO VERSION : 1.7.0 BETA.12 VENDOR : TSSTcorp MODEL : DVDWBD SH-B123L REVISION : SB04 LOADING MECHANISM : Tray NUMBER VOL. LEVELS : 256 BUFFER SIZE : 2048KB TOSHIBA CODE : OEM SB TOSHIBA MODEL : INTERFACE : ATAPI RPC2 SCHEME : YES STATUS : Set USER CHANGES : 4 VENDOR CHANGES : 4 CURRENT REGION : 2 ANALOG AUDIO PLAY : YES COMPOSITE OUTPUT : NO DIGITAL PORT-PORT1 : NO DIGITAL PORT-PORT2 : NO READ UPC CODE : YES MULTISESSION READ : YES MODE 2 FORM 1 : YES MODE 2 FORM 2 : YES READ ISRC CODE : YES READ BAD CODE : NO BUFFER UNDER-RUN : YES MT. RAINIER : NO CAN READ CDR : YES CAN READ CDRW : YES CAN READ CDRM2 : YES CAN WRITE CDR : YES CAN WRITE CDRW : YES CAN TEST WRITE : YES CAN READ DVD-ROM : YES CAN READ DVD-R : YES CAN READ DVD-RW : YES CAN READ DVD-RAM : YES CAN READ DVD+R : YES CAN READ DVD+RW : YES CAN WRITE DVD-R : YES CAN WRITE DVD-RW : YES CAN WRITE DVD-RAM : YES CAN WRITE DVD+R : YES CAN WRITE DVD+RW : YES MAX CDR READ SPEED : 48 MAX CDR WRITE SPEED: 48 Thanks!
|
|
| Top |
|
|
|
|
Posted: Fri Feb 10, 2012 8:28 pm |
|
Joined: Fri Feb 10, 2012 8:26 pm
Posts: 2
|
|
Just wanted to add my voice to requests for RPC1 firmware for this drive. My discinfo looks exactly like the one above. Thank you very much in advance!
|
|
| Top |
|
|
|
|
Posted: Sat Feb 11, 2012 4:15 pm |
|
| chef |
| Administrator |
|
|
Joined: Fri Aug 09, 2002 11:39 am
Posts: 23434
Location: .de #...still playing LLAMATRON! # sprite killing around level 138 and higher....
|
Plukh wrote: Just wanted to add my voice to requests for RPC1 firmware for this drive. My discinfo looks exactly like the one above. Thank you very much in advance! Then please post it here.
_________________
.:The rpc1.org FAQ:. Please read & follow our firmware request rules precisely! .:The DiscInfo tool:.
I am looking for DVD-R for Authoring DVD-R (A) & HD-DVD media, any size, any brand. Please pm me if you can help.
|
|
| Top |
|
|
|
|
Posted: Sat Feb 11, 2012 9:21 pm |
|
Joined: Fri Feb 10, 2012 8:26 pm
Posts: 2
|
|
I could've just copy and pasted from above (changing the region code, which is, obviously, the only difference), but being the nice and responsible person that I am, I'd went to a whole lot of trouble of opening up my mediaplayer, unscrewing the drive, opening up my computer case, attaching the drive, switching drive access from AHCI to IDE in the BIOS, then finally running discinfo, only to get a result I'd already got once (but didn't keep, as it was a verbatim copy of the one I'd referenced). Anyway, here goes:
DISCINFO VERSION : 1.7.0 BETA.12
VENDOR : TSSTcorp
MODEL : DVDWBD SH-B123L
REVISION : SB04
LOADING MECHANISM : Tray
SERIAL NUMBER :
NUMBER VOL. LEVELS : 256
BUFFER SIZE : 2048KB
TOSHIBA CODE : OEM SB
TOSHIBA MODEL :
INTERFACE : ATAPI
RPC2 SCHEME : YES
STATUS : Set
USER CHANGES : 4
VENDOR CHANGES : 4
CURRENT REGION : 1
ANALOG AUDIO PLAY : YES
COMPOSITE OUTPUT : NO
DIGITAL PORT-PORT1 : NO
DIGITAL PORT-PORT2 : NO
READ UPC CODE : YES
MULTISESSION READ : YES
MODE 2 FORM 1 : YES
MODE 2 FORM 2 : YES
READ ISRC CODE : YES
READ BAD CODE : NO
BUFFER UNDER-RUN : YES
MT. RAINIER : NO
CAN READ CDR : YES
CAN READ CDRW : YES
CAN READ CDRM2 : YES
CAN WRITE CDR : YES
CAN WRITE CDRW : YES
CAN TEST WRITE : YES
CAN READ DVD-ROM : YES
CAN READ DVD-R : YES
CAN READ DVD-RW : YES
CAN READ DVD-RAM : YES
CAN READ DVD+R : YES
CAN READ DVD+RW : YES
CAN WRITE DVD-R : YES
CAN WRITE DVD-RW : YES
CAN WRITE DVD-RAM : YES
CAN WRITE DVD+R : YES
CAN WRITE DVD+RW : YES
MAX CDR READ SPEED : 48
MAX CDR WRITE SPEED: 48
Hope this will help somehow. I'm off to reverse all the changes I just did.
|
|
| Top |
|
|
|
|
Posted: Mon Feb 13, 2012 6:56 pm |
|
Joined: Mon Feb 13, 2012 6:46 pm
Posts: 1
|
|
Hi To all from the UK
I would also like to add my request for rpc1 firmware
Pasted discinfo beta info below
Happy to provide any info on request
Regards
Chris
DISCINFO VERSION : 1.7.0 BETA.12
VENDOR : TSSTcorp
MODEL : DVDWBD SH-B123L
REVISION : SB04
LOADING MECHANISM : Tray
SERIAL NUMBER :
NUMBER VOL. LEVELS : 256
BUFFER SIZE : 2048KB
TOSHIBA CODE : OEM SB
TOSHIBA MODEL :
INTERFACE : ATAPI
RPC2 SCHEME : YES
STATUS : Set
USER CHANGES : 4
VENDOR CHANGES : 4
CURRENT REGION : 2
ANALOG AUDIO PLAY : YES
COMPOSITE OUTPUT : NO
DIGITAL PORT-PORT1 : NO
DIGITAL PORT-PORT2 : NO
READ UPC CODE : YES
MULTISESSION READ : YES
MODE 2 FORM 1 : YES
MODE 2 FORM 2 : YES
READ ISRC CODE : YES
READ BAD CODE : NO
BUFFER UNDER-RUN : YES
MT. RAINIER : NO
CAN READ CDR : YES
CAN READ CDRW : YES
CAN READ CDRM2 : YES
CAN WRITE CDR : YES
CAN WRITE CDRW : YES
CAN TEST WRITE : YES
CAN READ DVD-ROM : YES
CAN READ DVD-R : YES
CAN READ DVD-RW : YES
CAN READ DVD-RAM : YES
CAN READ DVD+R : YES
CAN READ DVD+RW : YES
CAN WRITE DVD-R : YES
CAN WRITE DVD-RW : YES
CAN WRITE DVD-RAM : YES
CAN WRITE DVD+R : YES
CAN WRITE DVD+RW : YES
MAX CDR READ SPEED : 48
MAX CDR WRITE SPEED: 48
|
|
| Top |
|
|
|
|
Posted: Mon May 21, 2012 11:15 pm |
|
Joined: Mon May 21, 2012 11:10 pm
Posts: 1
|
|
Hello.
I also wanted to ask if there is a firmware to make the SH-B123L code free.
Here are my information from DiscInfo:
DISCINFO VERSION : 1.5.5.9
VENDOR : TSSTcorp
MODEL : DVDWBD SH-B123L
REVISION : SB04
VENDOR SPECIFIC : 0331
LOADING MECHANISM : Tray
SERIAL NUMBER :
NUMBER VOL. LEVELS : 256
BUFFER SIZE : 2048KB
INTERFACE : ATAPI
RPC2 SCHEME : YES
STATUS : Set
USER CHANGES : 4
VENDOR CHANGES : 4
CURRENT REGION : 2
ANALOG AUDIO PLAY : YES
COMPOSITE OUTPUT : NO
DIGITAL PORT-PORT1 : NO
DIGITAL PORT-PORT2 : NO
READ UPC CODE : YES
MULTISESSION READ : YES
MODE 2 FORM 1 : YES
MODE 2 FORM 2 : YES
READ ISRC CODE : YES
READ BAD CODE : NO
BUFFER UNDER-RUN : YES
MT. RAINIER : NO
CAN READ CDR : YES
CAN READ CDRW : YES
CAN READ CDRM2 : YES
CAN WRITE CDR : YES
CAN WRITE CDRW : YES
CAN TEST WRITE : YES
CAN READ DVD-ROM : YES
CAN READ DVD-R : YES
CAN READ DVD-RW : YES
CAN READ DVD-RAM : YES
CAN READ DVD+R : YES
CAN READ DVD+RW : YES
CAN WRITE DVD-R : YES
CAN WRITE DVD-RW : YES
CAN WRITE DVD-RAM : YES
CAN WRITE DVD+R : YES
CAN WRITE DVD+RW : YES
MAX CDR READ SPEED : 94
I hope you can help me and forgive me for my bad english. Its not my mother language.
|
|
| Top |
|
|
|
|
Posted: Wed May 23, 2012 6:29 am |
|
| chef |
| Administrator |
|
|
Joined: Fri Aug 09, 2002 11:39 am
Posts: 23434
Location: .de #...still playing LLAMATRON! # sprite killing around level 138 and higher....
|
DarkGift wrote: Hello.
I also wanted to ask if there is a firmware to make the SH-B123L code free.
Here are my information from DiscInfo:
....
I hope you can help me and forgive me for my bad english. Its not my mother language. No problem, "informations" has been fixed to information, because informations does not exist in english. I also removed the info output for the virtual drive...
_________________
.:The rpc1.org FAQ:. Please read & follow our firmware request rules precisely! .:The DiscInfo tool:.
I am looking for DVD-R for Authoring DVD-R (A) & HD-DVD media, any size, any brand. Please pm me if you can help.
|
|
| Top |
|
|
|
|
Posted: Thu Jan 10, 2013 1:27 am |
|
Joined: Thu Jan 10, 2013 1:11 am
Posts: 0
|
|
Hi there
I too, would like to request a firmware that could make my SH-B123L region free
Here are my DiscInfo information:
DISCINFO VERSION : 1.6.1.6
VENDOR : TSSTcorp
MODEL : DVDWBD SH-B123L
REVISION : SB04
VENDOR SPECIFIC : 0331
LOADING MECHANISM : Tray
SERIAL NUMBER :
NUMBER VOL. LEVELS : 256
BUFFER SIZE : 2048KB
TOSHIBA CODE : OEM SB
TOSHIBA MODEL :
INTERFACE : ATAPI
RPC2 SCHEME : YES
STATUS : Set
USER CHANGES : 4
VENDOR CHANGES : 4
CURRENT REGION : 2
ANALOG AUDIO PLAY : YES
COMPOSITE OUTPUT : NO
DIGITAL PORT-PORT1 : NO
DIGITAL PORT-PORT2 : NO
READ UPC CODE : YES
MULTISESSION READ : YES
MODE 2 FORM 1 : YES
MODE 2 FORM 2 : YES
READ ISRC CODE : YES
READ BAD CODE : NO
BUFFER UNDER-RUN : YES
MT. RAINIER : NO
CAN READ CDR : YES
CAN READ CDRW : YES
CAN READ CDRM2 : YES
CAN WRITE CDR : YES
CAN WRITE CDRW : YES
CAN TEST WRITE : YES
CAN READ DVD-ROM : YES
CAN READ DVD-R : YES
CAN READ DVD-RW : YES
CAN READ DVD-RAM : YES
CAN READ DVD+R : YES
CAN READ DVD+RW : YES
CAN WRITE DVD-R : YES
CAN WRITE DVD-RW : YES
CAN WRITE DVD-RAM : YES
CAN WRITE DVD+R : YES
CAN WRITE DVD+RW : YES
MAX CDR READ SPEED : 48
MAX CDR WRITE SPEED: 48
|
|
| Top |
|
|
|
|
Page 1 of 1
|
[ 25 posts ] |
|
|
