The Firmware Page

hi i need firmware for gdr-8164b discinfo details are below i need rpc1 patch

VENDOR : HL-DT-ST
MODEL : DVD-ROM GDR8164B
REVISION : 0M08
VENDOR SPECIFIC : 0BMBA 05/08/05
LOADING MECHANISM : Tray
NUMBER VOL. LEVELS : 256
BUFFER SIZE : 256KB
INTERFACE : ATAPI
RPC2 SCHEME : YES
STATUS : Not Set
USER CHANGES : 5
VENDOR CHANGES : 4
CURRENT REGION : Not set
ANALOG AUDIO PLAY : YES
COMPOSITE OUTPUT : NO
DIGITAL PORT-PORT1 : NO
DIGITAL PORT-PORT2 : NO
READ UPC CODE : YES
MULTISESSION READ : YES
MODE 2 FORM 1 : YES
MODE 2 FORM 2 : YES
READ ISRC CODE : YES
READ BAD CODE : NO
BUFFER UNDER-RUN : NO
MT. RAINIER : NO
CAN READ CDR : YES
CAN READ CDRW : YES
CAN READ CDRM2 : YES
CAN WRITE CDR : NO
CAN WRITE CDRW : NO
CAN TEST WRITE : NO
CAN READ DVD-ROM : YES
CAN READ DVD-R : YES
CAN READ DVD-RW : YES
CAN READ DVD-RAM : YES
CAN READ DVD+R : YES
CAN READ DVD+RW : YES
CAN WRITE DVD-R : NO
CAN WRITE DVD-RW : NO
CAN WRITE DVD-RAM : NO
CAN WRITE DVD+R : NO
CAN WRITE DVD+RW : NO
MAX CDR READ SPEED : 48

Only a beta based on 0L06 were found...
http://tdb.rpc1.org/#GDR8164B

i have tried that but my revision is 0M08 AND OL06 dont work on that
VENDOR : HL-DT-ST
MODEL : DVD-ROM GDR8164B
REVISION : 0M08

...then you need to use softwae like AnyDVD............