Looking for MAD DOG drive firmware...

Here you can request new/old firmware for PC Optical Drives.
* Attention! You must read and apply to the REQUEST RULES!! *

Moderators: chef, Puma, devilsclaw

Looking for MAD DOG drive firmware...

Postby StumpyPershaw on Mon Oct 12, 2009 2:56 am

Model: MAD DOG MD-16X3DVD9-8X
Current version: 1.F1

Desired version: 1.F3 (Official release)

Any help will be appreciated. It seems like my drive doesn't want to read the NWN2: Storm of Zehir DVD. :(

Code: Select all
DISCINFO VERSION   : 1.6.1.6
VENDOR             : MAD DOG
MODEL              : MD-16X3DVD9-8X 
REVISION           : 1.F1
VENDOR SPECIFIC    : 05112900           
LOADING MECHANISM  : Tray
SERIAL NUMBER      : 59MA812S111
NUMBER VOL. LEVELS : 256
BUFFER SIZE        : 2048KB
INTERFACE          : ATAPI
RPC2 SCHEME        : YES
STATUS             : Set
USER CHANGES       : 4
VENDOR CHANGES     : 4
CURRENT REGION     : 1
ANALOG AUDIO PLAY  : YES
COMPOSITE OUTPUT   : NO
DIGITAL PORT-PORT1 : NO
DIGITAL PORT-PORT2 : NO
READ UPC CODE      : YES
MULTISESSION READ  : YES
MODE 2 FORM 1      : YES
MODE 2 FORM 2      : YES
READ ISRC CODE     : YES
READ BAD CODE      : NO
BUFFER UNDER-RUN   : YES
MT. RAINIER        : NO
CAN READ CDR       : YES
CAN READ CDRW      : YES
CAN READ CDRM2     : YES
CAN WRITE CDR      : YES
CAN WRITE CDRW     : YES
CAN TEST WRITE     : YES
CAN READ DVD-ROM   : YES
CAN READ DVD-R     : YES
CAN READ DVD-RW    : YES
CAN READ DVD-RAM   : YES
CAN READ DVD+R     : YES
CAN READ DVD+RW    : YES
CAN WRITE DVD-R    : YES
CAN WRITE DVD-RW   : YES
CAN WRITE DVD-RAM  : YES
CAN WRITE DVD+R    : YES
CAN WRITE DVD+RW   : YES
MAX CDR READ SPEED : 48
MAX CDR WRITE SPEED: 48
StumpyPershaw
New Member
 
Posts: 2
Joined: Mon Oct 12, 2009 2:29 am


Re: Looking for MAD DOG drive firmware...

Postby StumpyPershaw on Thu Oct 15, 2009 4:43 pm

Alas, that page/link seems to be dead. I've had similar luck with other such pages, all resulting in dead pages. :(
StumpyPershaw
New Member
 
Posts: 2
Joined: Mon Oct 12, 2009 2:29 am

Re: Looking for MAD DOG drive firmware...

Postby Puma on Thu Oct 15, 2009 5:04 pm

StumpyPershaw wrote:Alas, that page/link seems to be dead. I've had similar luck with other such pages, all resulting in dead pages. :(


odd, was working when i posted, as i checked it
Puma
Administrator
Administrator
 
Posts: 10129
Joined: Tue May 11, 2004 3:02 pm
Location: UK

Re: Looking for MAD DOG drive firmware...

Postby Liggy on Fri Oct 16, 2009 1:21 pm

The MAD DOG MD-16X3DVD9-8X is a rebadged NEC ND-4550A drive. You can find firmwares (incl. original and modified 1.F3) on my ND-4550A page. The drive can then be flashed with Binflash.

And both pages should not be dead :wink:
Flash or dump your NEC or Optiarc DVD burner firmware on Mac, Windows, DOS or Linux with Binflash.
Visit Liggy's and Dee's NEC and Optiarc firmware and tools page.
User avatar
Liggy
Firmware Patcher
 
Posts: 282
Joined: Mon Aug 23, 2004 10:39 am
Location: Monkey Island


Return to Request firmware

Who is online

Users browsing this forum: No registered users and 2 guests