|
Portal Board index » .:: Firmware Flashing ::. » Request firmware
All times are UTC [ DST ]
|
 
|
Page 1 of 1
|
[ 8 posts ] |
|
| Author |
Message |
|
|
 Posted: Sat Nov 27, 2010 9:39 pm |
|
Joined: Sat Nov 27, 2010 9:16 pm
Posts: 4
|
DISCINFO VERSION : 1.7.0 BETA.12 VENDOR : Optiarc MODEL : BD RW BD-5730S REVISION : 1.02 LOADING MECHANISM : Tray BUFFER SIZE : 3072KB INTERFACE : ATAPI RPC2 SCHEME : YES STATUS : Set USER CHANGES : 4 VENDOR CHANGES : 4 CURRENT REGION : 1 ANALOG AUDIO PLAY : NO COMPOSITE OUTPUT : NO DIGITAL PORT-PORT1 : NO DIGITAL PORT-PORT2 : NO READ UPC CODE : YES MULTISESSION READ : YES MODE 2 FORM 1 : YES MODE 2 FORM 2 : YES READ ISRC CODE : YES READ BAD CODE : NO BUFFER UNDER-RUN : YES MT. RAINIER : NO CAN READ CDR : YES CAN READ CDRW : YES CAN READ CDRM2 : YES CAN WRITE CDR : YES CAN WRITE CDRW : YES CAN TEST WRITE : YES CAN READ DVD-ROM : YES CAN READ DVD-R : YES CAN READ DVD-RW : YES CAN READ DVD-RAM : YES CAN READ DVD+R : YES CAN READ DVD+RW : YES CAN WRITE DVD-R : YES CAN WRITE DVD-RW : YES CAN WRITE DVD-RAM : YES CAN WRITE DVD+R : YES CAN WRITE DVD+RW : YES MAX CDR READ SPEED : 24 MAX CDR WRITE SPEED: 24 OFFICIAL FIRMWARE PAGE: http://www.sony-optiarc.us/en/support-s ... ries7.htmlDIRECT LINK: http://www.sony-optiarc.us/uploads/PW/k ... S_V102.zipDespite my laptop is ASUS I've upgraded the factory unit with this one so the drive is not ASUS related. I would like to flash the drive to RPC-1. In case you need extra information, please let me know. Many thanks
|
|
| Top |
|
 |
|
|
Posted: Sun Nov 28, 2010 12:31 pm |
|
Joined: Sat Nov 27, 2010 9:16 pm
Posts: 4
|
[_chef_] wrote: You cannot bend the slimtype drive rules, you always need the regarding manufacturer (OEM) firmware for your optical drive to function properly. Oops. Is that a "is not possible" Regards
|
|
| Top |
|
|
|
|
Posted: Sun Nov 28, 2010 4:22 pm |
|
Joined: Sat Nov 27, 2010 9:16 pm
Posts: 4
|
[_chef_] wrote: Does that drive work properly with the current firmware? Yes, it works perfect with the current one. Thanks
|
|
| Top |
|
|
|
|
Posted: Mon Nov 29, 2010 1:49 pm |
|
| Liggy |
| Firmware Patcher |
 |
Joined: Mon Aug 23, 2004 10:39 am
Posts: 282
Location: Monkey Island
|
|
The BD-5730S firmwares are encrypted and nobody has found out yet how to decrypt them or somehow get access to an unencrypted version.
_________________
Flash or dump your NEC or Optiarc DVD burner firmware on Mac, Windows, DOS or Linux with Binflash.
Visit Liggy's and Dee's NEC and Optiarc firmware and tools page.
|
|
| Top |
|
|
|
|
Posted: Mon Nov 29, 2010 2:04 pm |
|
Joined: Sat Nov 27, 2010 9:16 pm
Posts: 4
|
Liggy wrote: The BD-5730S firmwares are encrypted and nobody has found out yet how to decrypt them or somehow get access to an unencrypted version. Is it because the firmware is embeded in the exe or because someone extracted the firmware from the updater and checked that was encrypted? Thanks
|
|
| Top |
|
|
|
|
Posted: Tue Nov 30, 2010 9:52 am |
|
| Liggy |
| Firmware Patcher |
|
Joined: Mon Aug 23, 2004 10:39 am
Posts: 282
Location: Monkey Island
|
fexnok wrote: Is it because the firmware is embeded in the exe or because someone extracted the firmware from the updater and checked that was encrypted? The flasher executables consist of the actual flasher software plus an encrypted firmware. The firmware is not decrypted by the flasher when it's sent to the drive so the drive somehow needs to take care of the decryption.
_________________
Flash or dump your NEC or Optiarc DVD burner firmware on Mac, Windows, DOS or Linux with Binflash.
Visit Liggy's and Dee's NEC and Optiarc firmware and tools page.
|
|
| Top |
|
|
|
|
Page 1 of 1
|
[ 8 posts ] |
|
|
