|
Portal Board index » .:: Firmware Flashing ::. » Request firmware
All times are UTC [ DST ]
|
| Author |
Message |
|
|
 Posted: Tue Apr 05, 2011 3:32 pm |
|
Joined: Tue Apr 05, 2011 3:22 pm
Posts: 13
|
|
Hello everyone;
Sorry if my english isn't good. I look for a firmware to Reset RPC2 the GH22NS40 and DH16S10 of LG.
Thanks a lot.
DevilCry
|
|
| Top |
|
 |
|
|
Posted: Tue Apr 05, 2011 5:00 pm |
|
| Puma |
| Administrator |
 |
Joined: Tue May 11, 2004 3:02 pm
Posts: 10124
Location: UK
|
|
| Top |
|
|
|
|
Posted: Wed Apr 06, 2011 9:17 am |
|
Joined: Tue Apr 05, 2011 3:22 pm
Posts: 13
|
|
Sorry if my english isnt good, I'm Spanish.
I need a Autoreset Firmware for DVD-ROM DH16NS10 and DVDRAM GH22NS40.
I dont find anything and I see. I have seen a lot of information but nothing
This is the Information of DiscInfo:
DISCINFO VERSION : 1.7.0 BETA.12
VENDOR : HL-DT-ST
MODEL : DVD-ROM DH16NS10
REVISION : 0L04
VENDOR SPECIFIC : 0BLDA 08/04/01
LOADING MECHANISM : Tray
SERIAL NUMBER : FDC
NUMBER VOL. LEVELS : 256
BUFFER SIZE : 256KB
INTERFACE : ATAPI
RPC2 SCHEME : YES
STATUS : Set
USER CHANGES : 4
VENDOR CHANGES : 4
CURRENT REGION : 2
ANALOG AUDIO PLAY : YES
COMPOSITE OUTPUT : NO
DIGITAL PORT-PORT1 : NO
DIGITAL PORT-PORT2 : NO
READ UPC CODE : YES
MULTISESSION READ : YES
MODE 2 FORM 1 : YES
MODE 2 FORM 2 : YES
READ ISRC CODE : YES
READ BAD CODE : NO
BUFFER UNDER-RUN : NO
MT. RAINIER : NO
CAN READ CDR : YES
CAN READ CDRW : YES
CAN READ CDRM2 : YES
CAN WRITE CDR : NO
CAN WRITE CDRW : NO
CAN TEST WRITE : NO
CAN READ DVD-ROM : YES
CAN READ DVD-R : YES
CAN READ DVD-RW : YES
CAN READ DVD-RAM : YES
CAN READ DVD+R : YES
CAN READ DVD+RW : YES
CAN WRITE DVD-R : NO
CAN WRITE DVD-RW : NO
CAN WRITE DVD-RAM : NO
CAN WRITE DVD+R : NO
CAN WRITE DVD+RW : NO
MAX CDR READ SPEED : 6
DISCINFO VERSION : 1.7.0 BETA.12
VENDOR : HL-DT-ST
MODEL : DVDRAM GH22NS40
REVISION : NL02
LOADING MECHANISM : Tray
SERIAL NUMBER : K3E8A8J4657
NUMBER VOL. LEVELS : 256
BUFFER SIZE : 2048KB
INTERFACE : ATAPI
RPC2 SCHEME : YES
STATUS : Set
USER CHANGES : 4
VENDOR CHANGES : 4
CURRENT REGION : 2
ANALOG AUDIO PLAY : YES
COMPOSITE OUTPUT : NO
DIGITAL PORT-PORT1 : NO
DIGITAL PORT-PORT2 : NO
READ UPC CODE : YES
MULTISESSION READ : YES
MODE 2 FORM 1 : YES
MODE 2 FORM 2 : YES
READ ISRC CODE : YES
READ BAD CODE : NO
BUFFER UNDER-RUN : YES
MT. RAINIER : NO
CAN READ CDR : YES
CAN READ CDRW : YES
CAN READ CDRM2 : YES
CAN WRITE CDR : YES
CAN WRITE CDRW : YES
CAN TEST WRITE : YES
CAN READ DVD-ROM : YES
CAN READ DVD-R : YES
CAN READ DVD-RW : YES
CAN READ DVD-RAM : YES
CAN READ DVD+R : YES
CAN READ DVD+RW : YES
CAN WRITE DVD-R : YES
CAN WRITE DVD-RW : YES
CAN WRITE DVD-RAM : YES
CAN WRITE DVD+R : YES
CAN WRITE DVD+RW : YES
MAX CDR READ SPEED : 48
MAX CDR WRITE SPEED: 48
|
|
| Top |
|
|
|
|
Posted: Wed Apr 06, 2011 10:16 am |
|
| Puma |
| Administrator |
|
Joined: Tue May 11, 2004 3:02 pm
Posts: 10124
Location: UK
|
|
| Top |
|
|
|
|
Posted: Wed Apr 06, 2011 12:59 pm |
|
Joined: Tue Apr 05, 2011 3:22 pm
Posts: 13
|
|
I did it but only work in one, the other remains unchanged, and the two are same.. What is happend?
|
|
| Top |
|
|
|
|
Posted: Wed Apr 06, 2011 1:57 pm |
|
| Puma |
| Administrator |
|
Joined: Tue May 11, 2004 3:02 pm
Posts: 10124
Location: UK
|
DevilCry wrote: I did it but only work in one, the other remains unchanged, and the two are same.. What is happend? yeah the LG GH22NS40 will work. i doubt you will get any patch for a DVD Rom drive now
_________________
Read The FAQ Firmware Request Rules
MCSE Thread Utilities
|
|
| Top |
|
|
|
|
Posted: Wed Apr 06, 2011 11:34 pm |
|
Joined: Tue Apr 05, 2011 3:22 pm
Posts: 13
|
Sorry if my English isnt good. Puma wrote: yeah the LG GH22NS40 will work. i doubt you will get any patch for a DVD Rom drive now Why do you doubt I will get any patch now? Cannot you help me?
|
|
| Top |
|
|
|
|
Posted: Thu Apr 07, 2011 12:29 am |
|
| ala42 |
| Firmware Patcher |
 |
Joined: Sun Nov 02, 2003 4:18 am
Posts: 990
Location: Germany
|
DevilCry wrote: I did it but only work in one, the other remains unchanged, and the two are same.. What is happend? Do you really think that anyone can figure out that you mean ? You did not tell us what you did to which of your two drives. If you want help, supply facts.
_________________
LiteOn/Benq/LG/NEC/Pioneer/Samsung/Toshiba stuff: MediaCodeSpeedEdit V 1.2.0.10, released October 3rd 2011
|
|
| Top |
|
|
|
|
Posted: Thu Apr 07, 2011 9:25 am |
|
Joined: Tue Apr 05, 2011 3:22 pm
Posts: 13
|
Os escribire en español. Yo descarge el firm. NL02 y con el MCSE modifique el firm y puse que se Autoresetease el RPC2. El tema es que solamente me funciono en una grabadora y no en las dos. Y las dos grabadoras son iguales, no se porque en una funciono y en la otra no cuando los datos que me dio el DiscInfor son iguales lo unico que cambia era el numero de Serie. Necesito que alguien me ayude o me diga a que se puede deber que funcione en una grabadora y no en la otra, o que si alguien tiene estas mismas grabadoras que me pase su firm ya modificado para probarlo. Y luego me haria falta el firm de la DH16NS10 que ese no se donde encontrarlo para modificarlo. Un Saludo y Mil Gracias. ------------------------------------------------------------------------------------------------------------ Google Translate wrote: I will write in Spanish.
I download the firmware. NL02 and the MCSE modify the firmware and put that Autoreset the RPC2. The only issue is that I run into a tape recorder and not both. And the two writers are alike, not because one worked and the other not when the data he gave me the DiscInfor are equal the only thing that changed was the serial number.
I need someone to help me or tell me that you may need to work on a tape recorder and not the other, or if someone has the same burners that happen to me and changed your signature to prove it.
And then I would need the signature of the DH16NS10 that do not know where to find it for editing.
Greetings and many thanks.
|
|
| Top |
|
|
|
|
Posted: Thu Apr 07, 2011 6:40 pm |
|
| chef |
| Administrator |
|
 |
Joined: Fri Aug 09, 2002 11:39 am
Posts: 23423
Location: .de #...still playing LLAMATRON! # sprite killing around level 138 and higher....
|
DevilCry wrote: Google Translate wrote: I will write in Spanish.
I download the firmware. NL02 and the MCSE modify the firmware and put that Autoreset the RPC2. The only issue is that I run into a tape recorder and not both. And the two writers are alike, not because one worked and the other not when the data he gave me the DiscInfor are equal the only thing that changed was the serial number.
I need someone to help me or tell me that you may need to work on a tape recorder and not the other, or if someone has the same burners that happen to me and changed your signature to prove it.
And then I would need the signature of the DH16NS10 that do not know where to find it for editing.
Greetings and many thanks. I doubt the s/n has changed due to patching your drive(s). And what do you mean with "tape recorder"??
_________________
.:The rpc1.org FAQ:. Please read & follow our firmware request rules precisely! .:The DiscInfo tool:.
I am looking for DVD-R for Authoring DVD-R (A) & HD-DVD media, any size, any brand. Please pm me if you can help. 
|
|
| Top |
|
|
|
|
Posted: Thu Apr 07, 2011 11:28 pm |
|
| ala42 |
| Firmware Patcher |
|
Joined: Sun Nov 02, 2003 4:18 am
Posts: 990
Location: Germany
|
|
| Top |
|
|
|
|
Posted: Fri Apr 08, 2011 9:28 am |
|
Joined: Tue Apr 05, 2011 3:22 pm
Posts: 13
|
|
Yes, it is. It worked only on one. And the two drives are de same.
I don't understand why doesn't work the other because they are the same.
|
|
| Top |
|
|
|
|
Posted: Fri Apr 08, 2011 11:42 pm |
|
| ala42 |
| Firmware Patcher |
|
Joined: Sun Nov 02, 2003 4:18 am
Posts: 990
Location: Germany
|
|
| Top |
|
|
|
|
Posted: Sat Apr 09, 2011 9:13 am |
|
Joined: Tue Apr 05, 2011 3:22 pm
Posts: 13
|
|
Drive 'A' can Autoreset Rpc2 and Drive 'B' cannot Autoreset Rpc2.
|
|
| Top |
|
|
|
|
Posted: Sat Apr 09, 2011 12:01 pm |
|
| Puma |
| Administrator |
|
Joined: Tue May 11, 2004 3:02 pm
Posts: 10124
Location: UK
|
|
| Top |
|
|
|
|
Posted: Sat Apr 09, 2011 3:32 pm |
|
Joined: Tue Apr 05, 2011 3:22 pm
Posts: 13
|
|
I did that and did not work.
|
|
| Top |
|
|
|
|
Posted: Sat Apr 09, 2011 3:56 pm |
|
| Puma |
| Administrator |
|
Joined: Tue May 11, 2004 3:02 pm
Posts: 10124
Location: UK
|
|
| Top |
|
|
|
|
Posted: Sat Apr 09, 2011 4:39 pm |
|
Joined: Tue Apr 05, 2011 3:22 pm
Posts: 13
|
|
before flashing the counter was 4 and after flashing the counter was 4.
I have 4 trials, you see the attach file
| Attachments: |
driver.png [ 320.81 KiB | Viewed 7633 times ]
|
|
|
| Top |
|
|
|
|
Posted: Sat Apr 09, 2011 5:17 pm |
|
| Puma |
| Administrator |
|
Joined: Tue May 11, 2004 3:02 pm
Posts: 10124
Location: UK
|
Quote: before flashing the counter was 4 and after flashing the counter was 4.
I have 4 trials, you see the attach file don't use that for changes. Use software like powerdvd for playback. accept the change. then powerdown your system fully. Restart and check the region count. Discinfo tool is good to use to see the changes etc.
_________________
Read The FAQFirmware Request Rules
MCSE Thread Utilities
|
|
| Top |
|
|
|
|
Posted: Sat Apr 09, 2011 5:41 pm |
|
Joined: Tue Apr 05, 2011 3:22 pm
Posts: 13
|
|
How can I use powerdvd to make the change?
I have powerdvd but I dont nkow how i make the change it.
|
|
| Top |
|
|
|
|
Posted: Sat Apr 09, 2011 5:55 pm |
|
| Puma |
| Administrator |
|
Joined: Tue May 11, 2004 3:02 pm
Posts: 10124
Location: UK
|
DevilCry wrote: How can I use powerdvd to make the change?
I have powerdvd but I dont nkow how i make the change it. it should ask you when you launch it, if you want to accept the region change or not
_________________
Read The FAQFirmware Request Rules
MCSE Thread Utilities
|
|
| Top |
|
|
|
|
Posted: Sun Apr 10, 2011 12:44 am |
|
Joined: Tue Apr 05, 2011 3:22 pm
Posts: 13
|
|
Info drivers:
DISCINFO VERSION : 1.7.0 BETA.12
VENDOR : HL-DT-ST
MODEL : DVD-ROM DH16NS10
REVISION : 0L04
VENDOR SPECIFIC : 0BLDA 08/04/01
LOADING MECHANISM : Tray
SERIAL NUMBER : FDC
NUMBER VOL. LEVELS : 256
BUFFER SIZE : 256KB
INTERFACE : ATAPI
RPC2 SCHEME : YES
STATUS : Set
USER CHANGES : 4
VENDOR CHANGES : 4
CURRENT REGION : 2
ANALOG AUDIO PLAY : YES
COMPOSITE OUTPUT : NO
DIGITAL PORT-PORT1 : NO
DIGITAL PORT-PORT2 : NO
READ UPC CODE : YES
MULTISESSION READ : YES
MODE 2 FORM 1 : YES
MODE 2 FORM 2 : YES
READ ISRC CODE : YES
READ BAD CODE : NO
BUFFER UNDER-RUN : NO
MT. RAINIER : NO
CAN READ CDR : YES
CAN READ CDRW : YES
CAN READ CDRM2 : YES
CAN WRITE CDR : NO
CAN WRITE CDRW : NO
CAN TEST WRITE : NO
CAN READ DVD-ROM : YES
CAN READ DVD-R : YES
CAN READ DVD-RW : YES
CAN READ DVD-RAM : YES
CAN READ DVD+R : YES
CAN READ DVD+RW : YES
CAN WRITE DVD-R : NO
CAN WRITE DVD-RW : NO
CAN WRITE DVD-RAM : NO
CAN WRITE DVD+R : NO
CAN WRITE DVD+RW : NO
MAX CDR READ SPEED : 6
DISCINFO VERSION : 1.7.0 BETA.12
VENDOR : HL-DT-ST
MODEL : DVDRAM GH22NS40
REVISION : NL02
LOADING MECHANISM : Tray
SERIAL NUMBER : K3E8A8J4657
NUMBER VOL. LEVELS : 256
BUFFER SIZE : 2048KB
INTERFACE : ATAPI
RPC2 SCHEME : YES
STATUS : Set
USER CHANGES : 4
VENDOR CHANGES : 4
CURRENT REGION : 2
ANALOG AUDIO PLAY : YES
COMPOSITE OUTPUT : NO
DIGITAL PORT-PORT1 : NO
DIGITAL PORT-PORT2 : NO
READ UPC CODE : YES
MULTISESSION READ : YES
MODE 2 FORM 1 : YES
MODE 2 FORM 2 : YES
READ ISRC CODE : YES
READ BAD CODE : NO
BUFFER UNDER-RUN : YES
MT. RAINIER : NO
CAN READ CDR : YES
CAN READ CDRW : YES
CAN READ CDRM2 : YES
CAN WRITE CDR : YES
CAN WRITE CDRW : YES
CAN TEST WRITE : YES
CAN READ DVD-ROM : YES
CAN READ DVD-R : YES
CAN READ DVD-RW : YES
CAN READ DVD-RAM : YES
CAN READ DVD+R : YES
CAN READ DVD+RW : YES
CAN WRITE DVD-R : YES
CAN WRITE DVD-RW : YES
CAN WRITE DVD-RAM : YES
CAN WRITE DVD+R : YES
CAN WRITE DVD+RW : YES
MAX CDR READ SPEED : 48
MAX CDR WRITE SPEED: 48
DISCINFO VERSION : 1.7.0 BETA.12
VENDOR : HL-DT-ST
MODEL : DVDRAM GH22NS40
REVISION : NL02
LOADING MECHANISM : Tray
SERIAL NUMBER : K7M89Q64551
NUMBER VOL. LEVELS : 256
BUFFER SIZE : 2048KB
INTERFACE : ATAPI
RPC2 SCHEME : YES
STATUS : Set
USER CHANGES : 4
VENDOR CHANGES : 4
CURRENT REGION : 2
ANALOG AUDIO PLAY : YES
COMPOSITE OUTPUT : NO
DIGITAL PORT-PORT1 : NO
DIGITAL PORT-PORT2 : NO
READ UPC CODE : YES
MULTISESSION READ : YES
MODE 2 FORM 1 : YES
MODE 2 FORM 2 : YES
READ ISRC CODE : YES
READ BAD CODE : NO
BUFFER UNDER-RUN : YES
MT. RAINIER : NO
CAN READ CDR : YES
CAN READ CDRW : YES
CAN READ CDRM2 : YES
CAN WRITE CDR : YES
CAN WRITE CDRW : YES
CAN TEST WRITE : YES
CAN READ DVD-ROM : YES
CAN READ DVD-R : YES
CAN READ DVD-RW : YES
CAN READ DVD-RAM : YES
CAN READ DVD+R : YES
CAN READ DVD+RW : YES
CAN WRITE DVD-R : YES
CAN WRITE DVD-RW : YES
CAN WRITE DVD-RAM : YES
CAN WRITE DVD+R : YES
CAN WRITE DVD+RW : YES
MAX CDR READ SPEED : 48
MAX CDR WRITE SPEED: 48
|
|
| Top |
|
|
|
|
Posted: Sun Apr 10, 2011 11:29 am |
|
Joined: Tue Apr 05, 2011 3:22 pm
Posts: 13
|
|
I want to change the region to the two recorders, to play a DVD that are region 4.
|
|
| Top |
|
|
|
