Request: Matshita UJ-844 RPC-1 firmware

Here you can request new/old firmware for PC Optical Drives.
* Attention! You must read and apply to the REQUEST RULES!! *

Moderators: chef, Puma, devilsclaw

Request: Matshita UJ-844 RPC-1 firmware

Postby istyna on Fri Dec 05, 2008 9:38 am

DISCINFO VERSION : 1.6.1.6
VENDOR : MATSHITA
MODEL : DVD-RAM UJ-844
REVISION : RC02
VENDOR SPECIFIC : ---
LOADING MECHANISM : Tray
NUMBER VOL. LEVELS : 256
BUFFER SIZE : 2048KB
INTERFACE : ATAPI
RPC2 SCHEME : YES
STATUS : Not Set
USER CHANGES : 5
VENDOR CHANGES : 4
CURRENT REGION : Not set
ANALOG AUDIO PLAY : YES
COMPOSITE OUTPUT : YES
DIGITAL PORT-PORT1 : NO
DIGITAL PORT-PORT2 : NO
READ UPC CODE : YES
MULTISESSION READ : YES
MODE 2 FORM 1 : YES
MODE 2 FORM 2 : YES
READ ISRC CODE : YES
READ BAR CODE : YES
BUFFER UNDER-RUN : YES
MT. RAINIER : NO
CAN READ CDR : YES
CAN READ CDRW : YES
CAN READ CDRM2 : YES
CAN WRITE CDR : YES
CAN WRITE CDRW : YES
CAN TEST WRITE : YES
CAN READ DVD-ROM : YES
CAN READ DVD-R : YES
CAN READ DVD-RW : YES
CAN READ DVD-RAM : YES
CAN READ DVD+R : YES
CAN READ DVD+RW : YES
CAN WRITE DVD-R : YES
CAN WRITE DVD-RW : YES
CAN WRITE DVD-RAM : YES
CAN WRITE DVD+R : YES
CAN WRITE DVD+RW : YES
MAX CDR READ SPEED : 24
MAX CDR WRITE SPEED: 16
istyna
New Member
 
Posts: 3
Joined: Sun Nov 30, 2008 11:57 pm

Re: Request: Matshita UJ-844 RPC-1 firmware

Postby Puma on Fri Dec 05, 2008 12:48 pm

have you a link to the official firmware release
Puma
Administrator
Administrator
 
Posts: 10131
Joined: Tue May 11, 2004 3:02 pm
Location: UK

Re: Request: Matshita UJ-844 RPC-1 firmware

Postby istyna on Fri Dec 05, 2008 3:50 pm

istyna
New Member
 
Posts: 3
Joined: Sun Nov 30, 2008 11:57 pm

Re: Request: Matshita UJ-844 RPC-1 firmware

Postby Coaster on Fri Dec 05, 2008 4:24 pm

@ istyna,

Welcome to the Forum.

Concerning Matshita / Matsushita / Panasonic Drive RPC-1 Region Free Firmware suggest reviewing the “Matshita / Matsushita / Panasonic drive owners” (viewtopic.php?f=12&t=34750) thread. In reviewing the “Matshita / Matsushita / Panasonic drive owners” thread you will see that ->

It is a well known documented fact that Matshita / Matsushita / Panasonic Region Code prohibitions are difficult and most likely are unable to be circumvented.

Unfortunately Matshita / Matsushita / Panasonic Region Free (RPC-1) Firmwares are not available and will not become available and also all “Software Solutions” (such as SlySoft’s ‘AnyDVD’) alternatives are also unable to circumvent Matshita / Matsushita / Panasonic Region Code prohibitions.

Your alternative is to either live with Matshita / Matsushita / Panasonic Region Code prohibitions or purchase a DVD Drive that Firmware modifications are able to remove Region Code prohibitions.

Regards,
Coaster
User avatar
Coaster
Posting Wizard
 
Posts: 635
Joined: Fri Dec 06, 2002 2:18 am

Re: Request: Matshita UJ-844 RPC-1 firmware

Postby istyna on Fri Dec 05, 2008 4:48 pm

Thanks, Coaster! It's a pleasure to join such a well run forum.

I have read all there is to read on the subject, both here, and in all ogther available forums.

The fact is that I have read that there are some patched FW's for some of the models, and I even saw on one of the Apple based forums, that someone had patched the 844 FW.

I don't weigh in heavily among the other users, but hope springs eternal.

If its possible to come up with a patched workaround, I know it will be done by one of the masters associated with this group.

...and if not, then I will continue to live with my RPC-2 slim drive until such a miracle happens.

Thanks for your reply!
istyna
New Member
 
Posts: 3
Joined: Sun Nov 30, 2008 11:57 pm


Return to Request firmware

Who is online

Users browsing this forum: Bing [Bot] and 3 guests