View unanswered posts | View active topics
|
Page 1 of 1
|
[ 10 posts ] |
|
| Author |
Message |
|
GrannyGruntbucket
|
Post subject: Burning problems after clean install of legit windows 7 64 Posted: Sun Nov 01, 2009 3:52 pm |
|
 |
| Rookie |
Joined: Sun Apr 28, 2002 4:27 pm Posts: 7
|
|
I have done a clean install of windows 7 home premium.
I have 2 x drives.
Nec DVD-RW ND-3500AG
Pioneer DVD-RW DVR-111 Both have been flashed some time ago with rpc1 firmware. Cannot remember what firmwares, as it was so long ago. Both worked flawlessly under xp pro 64 bit. I have used Ashampoo burning studio for many months without problems under xp. Since moving over to windows 7, and upgrading ashampoo to the latest version which supposedly supports win 7, I cannot get it to recognize a blank dvdr. It is trying to detect the disk over and over. Very occasionaly, I will get the green tick for just a second, then it's back to a red cross. Both drives are correctly listed in hardware devices. I did also try imgburn and it sort of worked but gave an error at the end of burning and froze. The burnt dvd seems to be ok, but I have not watched the movie fully so can't say it is 100% ok. I am guessing that either I have a wrong driver somewhere or I need to flash my drives with newer firmware to be recognized properly under win 7.
I have not yet installed much of my own stuff, so it is unlikely to be something I have installed. If anything, win 7 is at fault, as I just let win7 take care of any software updates.
Anyone any ideas?
|
|
| Top |
|
 |
|
Puma
|
Post subject: Re: Burning problems after clean install of legit windows 7 64 Posted: Sun Nov 01, 2009 6:13 pm |
|
 |
| Administrator |
 |
Joined: Tue May 11, 2004 2:02 pm Posts: 9188 Location: UK
|
|
windows 7 will install drivers automatically, you are using 9.20 ashampoo? i doubt firmware will have much to do with it, but post what firmware you have on both drives
_________________ Read The FAQ Firmware Request Rules MCSE Thread
|
|
| Top |
|
 |
|
GrannyGruntbucket
|
Post subject: Re: Burning problems after clean install of legit windows 7 64 Posted: Sun Nov 01, 2009 6:31 pm |
|
 |
| Rookie |
Joined: Sun Apr 28, 2002 4:27 pm Posts: 7
|
|
Yes, I am using ashampoo 9.20.
How do I check what firmwares I have on my drives?
Only driver details I can see in system/device manager is the msoft driver.
|
|
| Top |
|
 |
|
chromedome
|
Post subject: Re: Burning problems after clean install of legit windows 7 64 Posted: Sun Nov 01, 2009 6:34 pm |
|
 |
| Master Poster |
Joined: Mon Feb 24, 2003 1:30 pm Posts: 201
|
|
I have Windows 7 Ultimate and all drives and software works fine. Everything worked fine when I was using Windows 7 RC.
I would check all your chipset and sata drivers for your motherboard are up to date.
|
|
| Top |
|
 |
|
GrannyGruntbucket
|
Post subject: Re: Burning problems after clean install of legit windows 7 64 Posted: Mon Nov 02, 2009 8:46 pm |
|
 |
| Rookie |
Joined: Sun Apr 28, 2002 4:27 pm Posts: 7
|
|
My NEC 3500-AG has firmware v2.fa
Pinoeer dvr-111 has v1.29
So far, I have found that they work fine in Nero 9 and imgburn, but always gives an unspecified error at the end of a burn with imgburn, even though the disk seems fine.
Perhaps I have a duff copy of Ashampoo v9.20 but I did get teh same result with Ashampoo v10 but that states it is not windows 7 friendly.
|
|
| Top |
|
 |
|
Puma
|
Post subject: Re: Burning problems after clean install of legit windows 7 64 Posted: Mon Nov 02, 2009 10:57 pm |
|
 |
| Administrator |
 |
Joined: Tue May 11, 2004 2:02 pm Posts: 9188 Location: UK
|
GrannyGruntbucket wrote: My NEC 3500-AG has firmware v2.fa
Pinoeer dvr-111 has v1.29
So far, I have found that they work fine in Nero 9 and imgburn, but always gives an unspecified error at the end of a burn with imgburn, even though the disk seems fine.
Perhaps I have a duff copy of Ashampoo v9.20 but I did get teh same result with Ashampoo v10 but that states it is not windows 7 friendly. what media is it? have you checked to make sure you have latest chipset drivers, also maybe an idea to check under device manager, that your drives are running in UDMA mode
_________________ Read The FAQ Firmware Request Rules MCSE Thread
|
|
| Top |
|
 |
|
GrannyGruntbucket
|
Post subject: Re: Burning problems after clean install of legit windows 7 64 Posted: Mon Nov 02, 2009 11:05 pm |
|
 |
| Rookie |
Joined: Sun Apr 28, 2002 4:27 pm Posts: 7
|
|
As far as I know, I have the latest chipset drivers.
The disks are verbatim and Traxdata. I have always used these with no problems until I moved to win 7.
No where in device manager does it say anything about udma.
I also notice that both drives are listed as scsi drives. Is this correct? They are connected by the usual ide method.
I wonder if I have the wrong chipset drivers????
I used driveragent to find drivers for my chipset.
|
|
| Top |
|
 |
|
[_chef_]
|
Post subject: Re: Burning problems after clean install of legit windows 7 64 Posted: Tue Nov 03, 2009 6:46 am |
|
 |
| Administrator |
 |
Joined: Fri Aug 09, 2002 10:39 am Posts: 21493 Location: .de *Benders.Big.Score* The.Beast.With.A.Billion.Backs
|
GrannyGruntbucket wrote: As far as I know, I have the latest chipset drivers.
The disks are verbatim and Traxdata. I have always used these with no problems until I moved to win 7.
No where in device manager does it say anything about udma.
I also notice that both drives are listed as scsi drives. Is this correct? They are connected by the usual ide method.
I wonder if I have the wrong chipset drivers????
I used driveragent to find drivers for my chipset. To be precise, you have not, but you have used that brands which doesnt mean they had the same manufacturer ID / MID at all. Post the imgburn logfile.
_________________ .:The rpc1.org FAQ:. Please read the sticky FAQ thread at least once! The DiscInfo tool
|
|
| Top |
|
 |
|
GrannyGruntbucket
|
Post subject: Re: Burning problems after clean install of legit windows 7 64 Posted: Tue Nov 03, 2009 8:05 am |
|
 |
| Rookie |
Joined: Sun Apr 28, 2002 4:27 pm Posts: 7
|
|
; //****************************************\\ ; ImgBurn Version 2.5.0.0 - Log ; Sunday, 01 November 2009, 18:47:25 ; \\****************************************// ; ; I 18:41:03 ImgBurn Version 2.5.0.0 started! I 18:41:03 Microsoft Windows 7 Home Premium x64 Edition (6.1, Build 7600) I 18:41:03 Total Physical Memory: 8,387,064 KB - Available: 6,395,612 KB I 18:41:03 Initialising SPTI... I 18:41:03 Searching for SCSI / ATAPI devices... I 18:41:03 Found 1 DVD±RW and 1 DVD±RW/RAM! I 18:41:59 Operation Started! I 18:41:59 Source File: L:\torrents Finished\Nero.9.Reloaded.v9.4.17.0.MULTiLANGUAGE.DVD-RESTORE\nero94170rld\nero94170rld.iso I 18:41:59 Source File Sectors: 1,208,554 (MODE1/2048) I 18:41:59 Source File Size: 2,475,118,592 bytes I 18:41:59 Source File Volume Identifier: N-9.4.17.0 I 18:41:59 Source File Application Identifier: NERO BURNING ROM I 18:41:59 Source File Implementation Identifier: ULTRAISO v9.3.2.2656 I 18:41:59 Source File File System(s): ISO9660, Joliet I 18:41:59 Destination Device: [0:5:0] PIONEER DVD-RW DVR-111 1.29 (N:) (RAID) I 18:41:59 Destination Media Type: DVD+R (Disc ID: MCC-004-00) (Speeds: 4x, 6x, 8x, 12x, 16x) I 18:41:59 Destination Media Sectors: 2,295,104 I 18:41:59 Write Mode: DVD I 18:41:59 Write Type: DAO I 18:41:59 Write Speed: MAX I 18:41:59 DVD+R Reserve Track: No I 18:41:59 Link Size: Auto I 18:41:59 Lock Volume: Yes I 18:41:59 Test Mode: No I 18:41:59 OPC: No I 18:41:59 BURN-Proof: Enabled I 18:42:02 Advanced Settings - Optimal Writing Speed: No I 18:42:02 Filling Buffer... (40 MB) I 18:42:03 Writing LeadIn... I 18:42:41 Writing Session 1 of 1... (1 Track, LBA: 0 - 1208553) I 18:42:41 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 1208553) I 18:46:25 Synchronising Cache... I 18:46:26 Closing Track... I 18:46:27 Finalising Disc... I 18:47:00 Exporting Graph Data... I 18:47:00 Graph Data File: C:\Users\Steve Lewis\AppData\Roaming\ImgBurn\Graph Data Files\PIONEER_DVD-RW_DVR-111_1.29_01-NOVEMBER-2009_18-41_MCC-004-00_MAX.ibg I 18:47:00 Export Successfully Completed! I 18:47:00 Operation Successfully Completed! - Duration: 00:05:01 I 18:47:00 Average Write Rate: 10,839 KB/s (7.8x) - Maximum Write Rate: 13,154 KB/s (9.5x) I 18:47:00 Cycling Tray before Verify... W 18:47:10 Waiting for device to become ready... I 18:47:17 Abort Request Acknowledged E 18:47:17 Device Not Ready - Reason: Medium Not Present E 18:47:17 Operation Aborted! I 18:47:25 Close Request Acknowledged I 18:47:25 Closing Down... I 18:47:25 Shutting down SPTI... I 18:47:25 ImgBurn closed! ; ; ; //****************************************\\ ; ImgBurn Version 2.5.0.0 - Log ; Saturday, 31 October 2009, 11:46:51 ; \\****************************************// ; ; I 11:34:16 ImgBurn Version 2.5.0.0 started! I 11:34:16 Microsoft Windows 7 Home Premium x64 Edition (6.1, Build 7600) I 11:34:16 Total Physical Memory: 8,387,064 KB - Available: 6,899,148 KB I 11:34:16 Initialising SPTI... I 11:34:16 Searching for SCSI / ATAPI devices... I 11:34:16 Found 1 DVD±RW and 1 DVD±RW/RAM! I 11:35:30 Operation Started! I 11:35:30 Source File: L:\torrents Finished\Year.One.UNRATED.DVDR-BOW\bow-yearone\bow-yearone.img I 11:35:30 Source File Sectors: 2,294,423 (MODE1/2048) I 11:35:30 Source File Size: 4,698,978,304 bytes I 11:35:30 Source File Volume Identifier: YEAR_ONE I 11:35:30 Source File Volume Set Identifier: 4AAB32630000001F I 11:35:30 Source File Application Identifier: MKISOFS ISO 9660/HFS FILESYSTEM BUILDER & CDRECORD CD-R/DVD CREATOR (C) 1993 E.YOUNGDALE (C) 1997 J.PEARSON/J.SCHILLING I 11:35:30 Source File Implementation Identifier: mkisofs I 11:35:30 Source File File System(s): ISO9660, UDF (1.02) I 11:35:30 Destination Device: [0:5:0] PIONEER DVD-RW DVR-111 1.29 (N:) (RAID) I 11:35:30 Destination Media Type: DVD+R (Disc ID: MCC-004-00) (Speeds: 4x, 6x, 8x, 12x, 16x) I 11:35:30 Destination Media Sectors: 2,295,104 I 11:35:30 Write Mode: DVD I 11:35:30 Write Type: DAO I 11:35:30 Write Speed: MAX I 11:35:30 DVD+R Reserve Track: No I 11:35:30 Link Size: Auto I 11:35:30 Lock Volume: Yes I 11:35:30 Test Mode: No I 11:35:30 OPC: No I 11:35:30 BURN-Proof: Enabled I 11:35:31 Advanced Settings - Optimal Writing Speed: No I 11:35:32 Filling Buffer... (40 MB) I 11:35:32 Writing LeadIn... I 11:36:13 Writing Session 1 of 1... (1 Track, LBA: 0 - 2294422) I 11:36:13 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 2294422) I 11:43:54 Synchronising Cache... I 11:43:55 Closing Track... I 11:43:56 Finalising Disc... I 11:44:23 Exporting Graph Data... I 11:44:23 Graph Data File: C:\Users\Steve Lewis\AppData\Roaming\ImgBurn\Graph Data Files\PIONEER_DVD-RW_DVR-111_1.29_31-OCTOBER-2009_11-35_MCC-004-00_MAX.ibg I 11:44:23 Export Successfully Completed! I 11:44:23 Operation Successfully Completed! - Duration: 00:08:53 I 11:44:23 Average Write Rate: 9,975 KB/s (7.2x) - Maximum Write Rate: 13,101 KB/s (9.5x) I 11:44:23 Cycling Tray before Verify... W 11:44:33 Waiting for device to become ready... I 11:46:49 Abort Request Acknowledged E 11:46:49 Device Not Ready - Reason: Medium Not Present E 11:46:49 Operation Aborted! I 11:46:51 Close Request Acknowledged I 11:46:51 Closing Down... I 11:46:51 Shutting down SPTI... I 11:46:51 ImgBurn closed!
|
|
| Top |
|
 |
|
[_chef_]
|
Post subject: Re: Burning problems after clean install of legit windows 7 64 Posted: Tue Nov 03, 2009 11:03 am |
|
 |
| Administrator |
 |
Joined: Fri Aug 09, 2002 10:39 am Posts: 21493 Location: .de *Benders.Big.Score* The.Beast.With.A.Billion.Backs
|
GrannyGruntbucket wrote: ; //****************************************\\ ; ImgBurn Version 2.5.0.0 - Log ; Sunday, 01 November 2009, 18:47:25 ; \\****************************************// ; ; I 18:41:03 ImgBurn Version 2.5.0.0 started! I 18:41:03 Microsoft Windows 7 Home Premium x64 Edition (6.1, Build 7600) I 18:41:03 Total Physical Memory: 8,387,064 KB - Available: 6,395,612 KB I 18:41:03 Initialising SPTI... I 18:41:03 Searching for SCSI / ATAPI devices... I 18:41:03 Found 1 DVD±RW and 1 DVD±RW/RAM! I 18:41:59 Operation Started! I 18:41:59 Source File: L:\torrents Finished\Nero.9.Reloaded.v9.4.17.0.MULTiLANGUAGE.DVD-RESTORE\nero94170rld\nero94170rld.iso I 18:41:59 Source File Sectors: 1,208,554 (MODE1/2048) I 18:41:59 Source File Size: 2,475,118,592 bytes I 18:41:59 Source File Volume Identifier: N-9.4.17.0 I 18:41:59 Source File Application Identifier: NERO BURNING ROM
; ; //****************************************\\ ; ImgBurn Version 2.5.0.0 - Log ; Saturday, 31 October 2009, 11:46:51 ; \\****************************************// ; ; I 11:34:16 ImgBurn Version 2.5.0.0 started! I 11:34:16 Microsoft Windows 7 Home Premium x64 Edition (6.1, Build 7600) I 11:34:16 Total Physical Memory: 8,387,064 KB - Available: 6,899,148 KB I 11:34:16 Initialising SPTI... I 11:34:16 Searching for SCSI / ATAPI devices... I 11:34:16 Found 1 DVD±RW and 1 DVD±RW/RAM! I 11:35:30 Operation Started! I 11:35:30 Source File: L:\torrents Finished\Year.One.UNRATED.DVDR-BOW\bow-yearone\bow-yearone.img I 11:35:30 Source File Sectors: 2,294,423 (MODE1/2048) I 11:35:30 Source File Size: 4,698,978,304 bytes I 11:35:30 Source File Volume Identifier: YEAR_ONE I 11:35:30 Source File Volume Set Identifier: 4AAB32630000001F I 11:35:30 Source File Application Identifier: MKISOFS ISO 9660/HFS FILESYSTEM BUILDER & CDRECORD CD-R/DVD CREATOR (C) 1993 E.YOUNGDALE (C) 1997 J.PEARSON/J.SCHILLING
I am sure you are not allowed to download copyrighted software, known as "warez", legally. 
_________________ .:The rpc1.org FAQ:. Please read the sticky FAQ thread at least once! The DiscInfo tool
|
|
| Top |
|
 |
|
Page 1 of 1
|
[ 10 posts ] |
|
Who is online |
Users browsing this forum: No registered users and 1 guest |
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
|
|